Categories

Best Knc Gas Sensor

Natural Gas Leak Detector Portable Methane Propane Combustible Natural Gas Leak Sniffer Detector with 10ft Drop Test by HABOTES (Handheld)

  • 【Portable Gas Leak Detector】Portable Natural gas sniffer and tester is used to locate exact gas leak for various combustible gas, such as methane, natural gas, propane, LPG, sewer gas, coal gas, gasoline, other flammable gases..
  • 【Super Sensitive】Made in Japan sensor.High precision gas sensor for accurate and reliable gas leak detection, fast response time less than 2 seconds. High and low sensitivity are switchable for different scenarios. Set high sensitivity to find small gas leaks. Set low sensitivity to find larger explosive gas leaks..
  • 【Simple To Use】Has an easy-to-understand interface, without complicated instructions, extremely simple to use. This portable gas detector powered by 3.7 V Li-ion Battery. With a maximum length of 16-Inch gooseneck sensor probe, you will be reaching anywhere even in hard-to-reach areas. Quickly and accurately pinpoint potential combustible gases leaked in your RV, trailer, camper, kitchen, basement, gas stove, water heater and other household devices at home..
  • 【Audible & Visual Alarm】With the sound and bargraph two alarm ways, you can get timely feedback on the results. Press MUTE key to turn on/off audible alarm in case you need. With high definition LCD display screen, which can show the data mo....
Check Stock

Plug-in Carbon Monoxide Detector Alarm,Combination 2-in-1 Co Detector and Combustible Gas Detector,UL2034 2 Pack

  • 【2-in-1 Carbon Monoxide Alarm】This 2-in-1 gas detector contains a catalytic combustion sensor and an electrochemical sensor for sensitive sensing and high accuracy, making it one of the most important members of your protection home!!!.
  • 【LCD Display & 85 High Volume Alarm】When the combustible gas or carbon monoxide gas reaches a certain level, the gas detector will display the gas concentration value and sound an alarm, allowing you to quickly determine and make the right choice..
  • 【Power Supply】 AC90-240V or 9V rechargeable battery.
  • in the event of a power outage, the 9V rechargeable backup battery will automatically kick in to continuously protect your home..
  • 【Combustible Gas Detection Range】LPG(Methane), natural gas, coal gas, gas fuel, artificial gas, liquefied petroleum gas, liquefied natural gas etc..
  • 【Safety Certification】UL2034 and UL1484.
Check Stock

Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 1 Pack

  • Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
  • Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
  • Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
  • Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
  • Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
Check Stock

Furnace Flame Sensor Replacement for Goodman 0130F00010 B11726-06 4 Pack

  • Compatible: the charming furnace heating sensor designed for gas HVAC systems, total length of the flame sensor is 3.7 inch.
  • Function: the furnace flame sensor is safely designed to detect flame, if the sensor does not detect flame, it shuts the gas valve off, preventing raw....
  • Easy to install: great replacement for Goodman furnace manufacturing 0130F00010 sensor, keep your home warm and comfortable.
  • Usage: when your flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety, replace the old....
  • Note: please check the compatibility with your previous part and appliance's model before ordering this replacement part.
Check Stock

Primeswift Furnace Flame Sensor SEN01114 Replacement for American Standard Furnace SEN00337 SEN00441,2 Pack

  • [Product Features]:This flame sensor monitors the burner to detect whether or not a flame is present.If the flame sensor is defective,the furnace may....
  • [Product Functions]:The flame sensor is designed to detect whether the flame is safe or not. When the sensor does not detect the flame gas valve is....
  • [Directly Replaces]:SEN00337,SEN00441,SEN00491,SEN1114,B340888P01..
  • [Fixes Symptoms]:The furnace main gas burners ignite,the main gas burners stay on for only 8 to 10 seconds,then the burners shut right back off..
  • [Quality Warranty]:This after-market replacement part is made from durable high quality material and well-tested by manufacturer.Absolutely meet or....
Check Stock

KONDUONE 338906 Flame Sensor for Whirlpool Kenmore Maytag Dryer - Replaces WP338906, AP6008294, 14205529, 3-3377, DC32-00008A Gas Dryer Radiant Flame Sensor

  • ► Radiant Flame Sensor – The 338906 sensor is located across from the gas igniter at the dryer’s burner assembly, and senses the flame for heat allowing the gas valve to open..
  • ► Excellent Product Performance – Made from high-quality plastic and metal material and well-tested before shipping. It is designed to meet or exceed OEM specifications..
  • ► Compatibility – This WP338906 flame sensor is used for many gas clothes dryers. While this is NOT a genuine Whirlpool dryer flame sensor, it will fit and work perfectly like the original. Please check your appliance model and confirm the compatibility before ordering..
  • ► Replaces Part Number – WP338906, 338906, AP6008294, 14205529, 14210083, 3-3377, DC32-00008A, DE353, PS11741429, WP338906VP, EAP11741429, PD00002361, etc..
  • ► Warranty & Support – Truly worry-free 3-month warranty and friendly customer service. If the flame sensor fails on your dryer, feel freely to contact us..
Check Stock

Propane Natural Digital Gas Detector, Gas Leak Detection, Home Gas Alarm, Plug-in Digital Gas Alarmer, High Sensitivity LPG LNG Coal Natural Gas Leak Detection, Alarm Monitor Sensor for Home Kitchen

  • 【Suit for Multiple Gas Leak Detection】: Eksahol propane gas detectors are suitable for detecting LPG(Propane and Methane), natural gas, coal gas, gas fuel, artificial gas, liquefied petroleum gas, liquefied natural gas, etc..
  • 【Suit for Multiple Scenes】: Eksahol natural gas detectors can be used as independent family alarm equipment, and also can be used as the front sensor of the alarm system. Widely Used for Restaurant, Hospital, Hotel, Oil Factory, Garage, Gas Station, etc..
  • 【Powerful Quality & Functionality】: Natural gas detector adopting high-quality semiconductor calefaction type sensor. Gas leak detector visual and audible alarm function MCU intelligent. When the gas alarm detects a gas leak, the LED display concentration changes, and an alarm of 85 dB or more issues..
  • 【Easy to Install】: Gas leak sniffer adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas..
  • 【Warm Tips】: The system warm-up time is about 2-3 minutes. During this time period, the gas test will not work. You need to wait for the display to show 0 (the system enters the working state) before it can be tested normally..
Check Stock

Combustible Gas Detector,Gas Detector Alarm, Portable Natural Gas Tester Detector/ Propane Methane Gas Sensor, Combustible Gas Sniffer with Sound Warning, Adjustable Sensitivity and Flex Probe

  • 1.High Senstivity Quick Respon: Highly sensitive (adjustable) with a quick reaction time, you will be able to detect gas leaks within 10 seconds and prevent dangerous accidents or damages..
  • 2.Small Detector Super Sensor:A 14-inch flexible probe allows location and detection of leaks in hard-to-reach and confined spacesSix red LED's (visual) and 85dB audible alerts that increase with Gas concentration,super sensor,high sensitivity,long lifetime..
  • 3.Versatile with Combustible Gases: For the detection of flammable gases, such as gas pipelines, propane tank stations, cabin leaks, exhaust gas and fuel leaks, inspection of leaks at the access. including methane or natural gas, propane, ethane, coal gas, gas oil, gasoline, toluene, alcohol, ketone and other flammable gases.Use in onstruction projects, mines, safety check of gas appliances, oil spill home kitchen or camper and etc..
  • 4.Economical and Green:Low battery indicator,audible buzzer, the combustible gas leak detector features a low battery indicator that makes sure the instrument is charged up before next use. Also, loud audible buzzers installed in the device indicate presence and concentration of detected gas..
  • 5.Durable and Portable:Shelled in Double-Sided ABS, so portable to carry in anywhere..
Check Stock

EC Buying GY-SGP30 Gas Sensor, Air Quality Carbon Dioxide Formaldehyde Monitoring TVOC CO2 Gas Sensor Module, a Digital Multi-Pixel Gas Sensor for Indoor Air Quality Monitoring,co2 Sensor Arduino I2C

  • ♥GY-SGP30 gas sensor is a multi-pixel gas sensor for indoor air quality applications with excellent long-term stability, I2C interface with TVOC and CO2eq output signals, very small 6-pin DFN package: 2.45 x 2.45 x 0.9 mm3, Low Power: 48 mA at 1.8V, Reflow Solderable.
  • ♥ Product parameter range：① Power supply voltage VDD: ‑0.3V to +2.16V ②Power supply voltage VDDH:‑0.3V to +2.16V ③Storage temperature range: ‑40 to +125°C ④ Operating temperature range: ‑40 to +85°C ⑤ Humidity range: 10%‑95% (non-condensing).
  • ♥ Product features:1. Supply voltage 3.3V or 5V.
  • 2.IIC communication interface, 3. Imported highly sensitive SGP30 formaldehyde sensor, chip power supply voltage is 1.8V.
  • 6. The onboard 1.8V LDO chip supplies power to SGP30, so the input power can be 3.3V or 5V 7. Product pins: VCC (3.3-5V), GND, SCL, SDA (4 pins in total).
  • ♥ Product use: SGP30 module can be used in air quality detectors, formaldehyde detectors, portable gas detectors, various DIY designs, etc..
  • ♥ packing list: 1X GY-SGP30 Gas Sensor1x4 pin header.
Check Stock

WESHLGD Plug-in Type Carbon Monoxide Alarm, CO Detector Monitor with LED Digital Display and Voice Alert for Home/Kitchen -1 Pack

  • High-precision & Sensitivity Sensor - Our Co Gas Detector Use High Reliability Electrochemical Sensor, Excellent Repeatability and Stability, Sensitive Response, Rapid Alarm..
  • Easy to Install - The detector adapts excellent industrial design and leaves 2nd outlet uninterrupted for other devices. Just plug in, and ready for monitoring potential gas leak risky after warm up process..
  • LED Digital Display & Human Voice Warning - The CO detector is suitable for 24 hours gas leak monitoring, When a carbon monoxide gas leak occurs, it can quickly identify the gas and emit an alarm of 85 decibels to avoid dangerous accidents and ensure personal and property safety..
  • Alarm Standard - 50ppm - Alarm within 60 to 90 minutes.
  • UL2034 Report & Worry-Free After service - We provide a 60-day money back service. If you have any questions, feel free to contact us and get a full refund for no reason. Complies with UL2034 safety standard..
Check Stock

Gas Leak Detector Portable Combustible Gas Detector Handheld Gas Analyzer Flammable Natural Gas Acetone Propane Benzene Ethanol Gasoline Methane Tester 9999 PPM 20% LEL with LCD Color Display

  • ...e, Hydrogen, Methane, Naphtha, Natural Gas, Paint Thinners, Propane, Solvents and more. You can use it in your house or your RV. Check appliances and piping in your house to pinpoint the precise source of a potential gas leak with this practical gas detector..
  • 【Super Sensitive & Quick Response】High precision gas sensor for accurate and reliable gas leak detection, fast response time less than 2 seconds. High and low sensitivity are switchable for different scenarios. Set high sensitivity to find small gas leaks. Set low sensitivity to find larger explosive gas leaks. This handheld gas leak detector allow users with the ability to quickly and easily detect combustible gas leaks in most hard-to-reach places around appliances..
  • 【Audible & Visual Alarm】With the sound and bargraph two alarm ways, you can get timely feedback on the results. Press MUTE key to turn on/off audible alarm in case you need. With high definition LCD display screen, which can show the data more clearly, give you a better using experience. Power-save modes, auto power off after about 10 minutes if there are no operation and measurement signal. Range (Methane Calibration): 0-9999ppm or 00.00-20.00%LEL..
  • 【Simple To Use】Has an easy-to-understand interface, without complicated....
Check Stock

Natural Gas Detector Gas Leak Detector Household Propane Leak Detector for Home Kitchen 1 White

  • Natural Gas Detector: Gas leak detectors for home use make your environment safer..
  • Gas Leak Detector: Adopt high-precision sensor technology to accurately monitor leaked gas..
  • LED Digital Display & Sound Warning:Gas Detector offers Voice Notification and a digital readout of the GAS concentration.When gas leak concentration....
  • Easy to Install: Gas leak detector adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas..
  • Precautions: The system warm-up time is about 2-3 minutes. During this time period, the gas test will not work. You need to wait for the display to....
Check Stock

62-23543-01 Furnace Burner Flame Sensor Rod(OEM) for Rheem - By TOMOON（3 pack）

  • ✅【PART NUMBER】 62-23543-01 Furnace Burner Flame Sensor Rod (3pack）-Designed for the gas HVAC system. Snug fit the Rheem Ruud, and Weatherking residential furnace models Furnace. If you are not sure if the model is the right one for your furnace, please feel free to contact us and be more than happy to answer your questions..
  • ✅【FINE CRASFTMANSHIP】Made of high-quality wear-resistant metal and ceramic, durable. Exquisite workmanship, each process is rigorously tested multiple times to achieve long-lasting and effective performance..
  • ✅【SUPERIORITY】Easy Instal nd cost-effective.：You can follow our install process replace the broken sensor easily. Just spend little money to fix your machine. Saves your money from the appliance guy!（note：Disconnect electrical power and shut off the gas supply before installing this part. Wear work gloves to protect your hands.）.
  • ✅【FUNCTION】The furnace flame sensor is designed to detect the flame. Termination: 1/4”male quick connect,Angle - sensor offset: 90 degree.Burner flame sensor 62-23543-01 detects when the burner flame has ignited and sends a signal to the control board to stop the igniter from operating..
  • ✅【SATISFYING SERVICE】Risk-free shopping, for any reason you are not co....
Check Stock