Categories

Best Knife Grinding Jig

Tormek T-4 Hand Tool Kit (Tormek T-4 Original + Tormek HTK-806 Hand Tool Kit) - sharpener that includes all the necessary jigs for knives, axes, scissors, and carving tools (US Version)

  • A complete sharpening system for hand tools – this bundle combines the Tormek T-4 water-cooled sharpening system with the HTK-806 hand tool sharpening jig and accessory kit.
  • The HTK-806 hand tool kit includes 6 jigs for sharpening hand tools like knives, scissors, axes, carving tools, and comes with its own storage case.
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: WM-200 Angle Master, PA-70 honing compound, SP-650 stone grader, SVM-45 knife jig, SVM-00 small knife jig, SVM-140 long knife jig, SVA-170 axe jig, SVX-150 scissor jig, SVS-38 short tool jig, TC-800 storage case. It’s a sharpening shop in a box!.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

VEVOR Vari-Grind System, 24' Length of V-arm Vari-Grind Attachment, 3' x 5' x 1/4' Platform Grinding Jig, Fit for 0.63' Bowl Gouge Vari-Grind Jig for the Wolverine Sharpening System

  • ...ashers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm. Suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Complete Component: 6-piece set: A fish board ruler, two knife grinding support bases, two side supports, and an angle working bracket. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding jig—the sys....
Check Stock

VEVOR Vari-Grind System, 24' Length of V-arm Vari-Grind Attachment, 3' x 5' x 1/4' Platform Grinding Jig, Fit for 0.63' Bowl Gouge Vari-Grind Jig for the Wolverine Sharpening System

  • ...ashers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm. Suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Complete Component: 6-piece set: A fish board ruler, two knife grinding support bases, two side supports, and an angle working bracket. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding jig—the sys....
Check Stock

Singring Belt Grinder Knife Jig Manual Sharpener Holder Long Sharpening Locator Fixed Angle Jig for Belt Sander Belt Machine Small

  • HIGH QUALITY MATERIAL: Our grinding fixture is composed of an aluminum alloy frame, which is a durable and long-life processing aid tool..
  • SIZE: The small grinding fixture is 6.29*2.36*2.55inch (16*6*6.5cm), which is suitable for holding the blades of 12 cm and below, and the large....
  • ADJUSTABLE ANGLE: The abrasive tool has a locking knob , and is also equipped with a hexagonal wrench. You can easily turn the locking knob and....
  • VERY CONVENIENCE: The dual ergonomic handles provide easy-to-reach operating characteristics. The most important thing is that the baffle design can....
  • WIDE APPLICATIOS: This knife grinding jig is perfect for pairing with the belt sander, grinding machine, sharpening machine, belt knife sharpener,....
Check Stock

Oneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels • Scrapers • Skews and Wood Carving Tools

  • The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money..
  • The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders..
  • Carpenter chisels up to 1-1/4" wide can be sharpened using the Wolverine's Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge. The Wolverine Grinding Jig comes wi....
Check Stock

Tormek T-8 Chef’s Kit (Tormek T-8 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • The Tormek T-8 is Tormek’s most powerful sharpener. It is a low RPM, water cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-8 Original, SE-77 Square Edge Jig, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, TT-50 Truing Tool, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

Tormek T-4 Chef’s Kit (Tormek T-4 Original Sharpener + KJ-45 Centering Knife Jig + KJ-140 Wide Centering Knife Jig + SVM-00 Small Knife Holder Jig + SVX-150 Scissor Jig + MH-380) (US Version)

  • This bundle combines the Tormek T-4 water-cooled sharpening system with the jigs trusted by chefs around the world..
  • This Tormek T-4 Chef’s Kit includes all the jigs to keep your kitchen knives and tools sharp. Use the KJ-45 for your knives, the KJ-140 for the longer knives, the SVX-150 for your scissors, and the SVM-00 for small knives. When you are all finished, cover your machine with the MH-380 machine cover to keep it nice and tidy..
  • The Tormek T-4 Original is Tormek’s 8 inch sharpener. It is a low RPM, water-cooled sharpening system that is built for precision sharpening and long tool life. It will keep your tools and accessories razor sharp and always ready to work. Includes both a grinding and honing wheel.
  • Includes: Tormek T-4 Original, PA-70 Honing Compound, SP-650 Stone Grader, WM-200 Angle Master, KJ-45 Centering Knife Jig, KJ-140 Wide Centering Knife Jig, SVM-00 Small Knife Holder Jig, SVX-150 Scissor Jig, and MH-380 Machine Cover.
  • Note: This low RPM machine operates at 115 volts and is designed to work exclusively in North America. If you plan on using this product in a country that operates at 220-240V, you will cause damage to the motor and machine..
Check Stock

DUEBEL Cabinet Hardware Jig 35mm Concealed Hinge Jig with Clamp Forstner Drill Bit Drilling Guide Hole Punch Locator Kit Woodworking Cabinet Door Installation Tool Aluminum Alloy Hole Locator

  • 【HANDLE WITH FASTENING DEVICE】The handle clamps the plate, no pliers are needed, DUEBEL punch locator drill guide has a fastening device. No need for extra clamp, including clamp itself, quick locating and fastening..
  • 【4 GEARS ADJUSTABLE EDGE DISTANCE OF PLATE】Easy to adjust, just use a wrench to loosen the screw, that’s OK. DUEBEL hinge drilling jig come with 2 simple wrenches. Drilling depth adjustable, adjust the distance between the limit ring and the drill sleeve to determine the depth of the hole..
  • 【DESIGNED FOR 35MM HINGES】This concealed hinge jig kit designed for 35mm hinges, no need for measuring, make cabinet door installation easy..
  • 【HEXAGONAL SHANK DRILL】Door jig kit with the hexagonal socket, the tool and the electric drill are no longer restricted, and the use is more convenient..
  • 【HARD ALUMINUM ALLOY BLADE】DUEBEL pocket hole jig kit comes with forstner drill bit, CNC fine grinding,thickening alloy knife blade. Package including: door installation kit * 1.
Check Stock

Chainsaw Sharpening Tool, Chainsaw chain Sharpener with 4Pcs Burrs, Manual Chainsaw Sharpener Jig Set with Carry Bag, Portable Chainsaw Sharpener kit for 4"-22" Chain Saws, Lumberjack, Garden Worker

  • ...sures accurate and repeatable tooth placement. Each time you sharpen the teeth, just turn the handle, the precise sharpening can ensure that every tooth is repaired, keep your chain saw in top shape with the chainsaw sharpening tool.
  • 【Perfect Gift Choice】: The chainsaw chain sharpener set includes 1 sharpener, 4 grinding burrs, 1 wrench, 1 cleaning brush, 2 work gloves, 1 installation instruction and 1 carry belt bag. The manual chainsaw sharpener tool is lightweight and small enough to take outdoor. It's an ideal gift for men, husband, friends, repairman, lumberjacks, landscapers and garden workers.
  • 【Worry-Free Service】: Our chainsaw blade sharpener can be used with 4-22 inch chainsaws and have wider compatibility than others. Life long worry free after sales service ensures that you can enjoy precise sharpening of chainsaw chains for a long time, grinding chains, and making outdoor work smoother. If you have any other questions, please feel free to contact us, we have been.
Check Stock

WEN 42704B 4-Piece Sharpening Accessory Kit for 10-Inch Sharpening Systems

  • Bring old, dull, and rusty blades back to life.
  • Includes a long knife jig, a short knife jig, an axe jig, and a scissors jig.
  • Compatible with the WEN BG4270 10-Inch Two-Direction Water-Cooled Wet/Dry Sharpening System.
  • Easy installation allows users to quickly change from jig to jig.
  • Universal design fits the majority of 10-inch wet/dry sharpeners on the market.
Check Stock

Upgraded 35mm Cabinet Hinge Jig, Aluminum Concealed Hinge Jig Kit for Drilling Hole, Boring Guide for Soft Close Cabinet Door Hinges – 35mm Hole Cutter Included

  • 【Premium & Durable Material】The 35mm concealed hinge jig is made of high-quality aluminum alloy material, no overheating melted worries. Come with a 35mm carbon steel drill bit, CNC fine grinding, thickening alloy knife blade, wear-resistant and durable, anti-corrosion and rust-proof, a cabinet door hinge jig can be used for years..
  • 【Quick Fix & Release Handle】This cabinet hinges jig has an adjustable platen and a quick-fix clip where boards can be quickly positioned and tightened–no movement enables more solid drilling. Fixing or releasing just in one handle, no pliers needed..
  • 【Adjustable Drilling Depth】Adjust the distance between the limit ring and the drill sleeve to determine the depth of the hole. This concealed hinge jig is suitable for boards with a thickness of 10mm to 20mm, adjust the drilling depth of 12-13mm normally. No longer worry about damaging your cabinet doors with it..
  • 【Upgraded All-in-one Design】: Built-in hinge positioning hole making quick locating screw hole position, the attached limit frame precisely locates the exact distance from the center of the hole to the edge of the wood. All-in-one designed to make the main body become sturdy and not easy to shake..
  • 【Excellent Woodworking Tool】: Upgraded concea....
Check Stock

VEVOR Vari-Grind Jig, 3/4' Diameter of the Hole Vari-Grind Attachment, Fit for 0.63' Bowl Gouges Grinding Jig with Vari-Grind, Large Hole Vari-Grind Attachment for the Wolverine Sharpening System

  • ...ashers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items..
  • Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm.
  • suitable for the diameter of the gouges is 0.6" / 16 mm..
  • Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance..
  • Easy to Install: The vari-grind side grinding jig is integrated for effortless installation. We will provide a hexagonal handle that can be installed by hand. Put the rod that needs to be processed into the hole, tighten the screw to fix the rod, and you can operate it on the grinder..
  • Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding ....
Check Stock

Chainsaw Sharpener Jig Hand-Cranked ChainSaw Sharpening Kit with 5 Tungsten Carbide Burr and Carry Bag Portable Chain Saw Sharpener Tools for 4-22 inch Chainsaw and Electric Saw Keep Chainsaw Sharp

  • ... can be applied to more complex environments and save your time. It's a very fast way to sharpen your chainsaw. The chain saw sharpener tool can make work smoother, well worth the money..
  • 【Sturdy Material】Chainsaw chain sharpener is made of anodized aluminum fixture, which is not easy to rust. The tungsten steel grinding burr is made of tungsten carbide, which is strong and durable. They sharper than the hard steel file, and have a longer service life. Hexagonal grinding head can be also applied to electric grinding.
  • 【Widely Compatible】Chain saw sharpeners work together with most 4-22 inch chainsaws and electric chainsaws, compatible with different sizes of chains. Such as .325"-3/16", .404"-7/32", 3/8 "P-3/16", 3/8 "P-5/32", 3/8"-13/64", etc. Perfect gifts for lumberjacks, garden workers, landscapers and DIY man. Specail and practical gift for fathers, friends and husband.
  • 【Easy Installation】 No need to remove the chainsaw chain. First, fix the chainsaw blade sharpener on the rod and position the pawl on the tooth. Then, insert the chainsaw sharpener jig burr into the 30° sharpening holes, tighten the top crip, and turn the handle to sharpen the knife quickly. Third, pull the chain after this tooth is repaired, and the blunt chain can easi....
Check Stock