Categories

Best Kobalt Router Table

Rockler Double Featherboard

  • 4-Piece Wood Router Table Accessory Kit: Get a cleaner shop and safer, more consistent routing with this convenient Rockler router table accessory kit! Our 4-Piece Router Table Accessory Kit includes a dust port & 3 featherboards for more consistent cut quality and to help prevent kickback..
  • 3 Featherboards For Consistent Cut Quality: Two of the router featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the router table and keeps your work against the fence..
  • 2-1/2 Dust Port: Keep your router table clean and dust-free with our router dust port. This router fence dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up..
  • Easy To Use: This miter slot featherboard can be quickly and easily connected to a miter slot openings of 3/8” deep x 3/4" wide or without the need for additional hardware..
  • What’s Included? Our 4-Piece router table accessory kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback..
Check Stock

O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock

O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check Stock

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock

Milwaukee Router Adapter for Festool & Makita Guide Rail

  • ROUTER TOOL COMBO KIT - Includes SKIL Router Table (SRT1039) and SKIL 10 Amp Fixed Base Corded Router (RT1323-00).
  • SKIL ROUTER TABLE - Equipped with Above the Table Adjustment, Integrated Bit Storage, Aluminum Mite Gauge Slot, Router Clamp, Starter Pin, and Two Featherboards for precise routing.
  • SKIL 10 AMP FIXED BASE ROUTER - Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish.
  • equipped with soft start, speed control, and a live tool indicator.
  • TALL FENCE WITH ADJUSTABLE FEATHERBOARDS - Tall 16-inch aluminum fence measures 24 inches wide and handles tall stock with ease, complimented by two featherboards, adjustable MDF face plates, and starter pin and guard.
  • PRECISION ROUTING - Use the Router Table for the heavy routing and the Fixed Base Router to complete the task.
Check Stock

Kobalt 80 Volt Power Equipment Compact Battery Charger Model KRC 80-06

  • Kobalt's 2nd Generation 80 Volt Smart Charger provides charging technology for all Kobalt 80 Volt batteries.
  • Lighter and smaller than original Kobalt model KRC 30-06.
  • including 2.0AH, 2.5AH, 3.0AH, 5.0AH, and 6.0AH.
  • Charges Kobalt 2.0AH battery to full charge in 60 minutes.
Check Stock

KREG Precision Router Table System, Kreg# PRS1045

  • 24″ x 32″ router table top includes a router insert plate with three molded Level-Loc reducing rings.
  • 36″ T-square style router table fence features a micro-adjust wheel for precise setups.
  • Outfeed anchor has been redesigned for more usable table space and easier removal.
  • Multi-purpose steel stand is adjustable from 31″ to 39″ in height.
  • Includes Router Table Top with insert plate, Router Table Fence and Multi-Purpose Steel Stand. #148166 KREG 4pc Casters Set not included..
Check Stock

SKIL RT1323-01 Router Table and 10Amp Fixed Base Router Kit

  • ROUTER TOOL COMBO KIT - Includes SKIL Router Table (SRT1039) and SKIL 10 Amp Fixed Base Corded Router (RT1323-00).
  • SKIL ROUTER TABLE - Equipped with Above the Table Adjustment, Integrated Bit Storage, Aluminum Mite Gauge Slot, Router Clamp, Starter Pin, and Two Featherboards for precise routing.
  • SKIL 10 AMP FIXED BASE ROUTER - Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish.
  • equipped with soft start, speed control, and a live tool indicator.
  • TALL FENCE WITH ADJUSTABLE FEATHERBOARDS - Tall 16-inch aluminum fence measures 24 inches wide and handles tall stock with ease, complimented by two featherboards, adjustable MDF face plates, and starter pin and guard.
  • PRECISION ROUTING - Use the Router Table for the heavy routing and the Fixed Base Router to complete the task.
Check Stock

2351208mm Router Table Plate Craftsman Router Table Insert Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches

  • Easy installation -- A convenient center hole bushing that aligns the router so that it can centered on the drill hole.Drill and install router easily....
  • Material -- A set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws. Router plate....
  • Wide Use -- Multi-function insert plate,suitable for making its own boring and milling table,suitable for high-precision woodworking.It is easy to....
  • Safety -- Inverting your router in a router table allows for safer and more versatile operations..
  • Size -- 235mm * 120mm * 8mm/9.3 * 4.7 * 0.3in. Installing Hole Distance: 62 * 70mm / 2.44 * 2.75in. This router table insert plate can be used in....
Check Stock

Aluminum Alloy Router Table Insert Plate with Plastic Router Insertion and Install Screws for Woodworking Bench, 300mm x 235mm x 9.5mm

  • High QualityIt is made of aluminum alloy panel, plastic router insert ,durable and can use for a long time.router aluminum adapter plate.
  • Center Hole BushingConvenient center hole bushing for aligning the router to the center of the drill hole. Size: 11.81 x 9.25 x 0.37 inch (appr.). router plate.
  • Easy to AdjustThreaded wrench inserts in each corner help you level and easily adjust the router insert with your table.router plate insert.
  • More Versatile OperationsInverting your router in a router table allows for safer and more versatile operations.router table insert plate.
  • Wide range of usesMulti-function insert plate, suitable for making its own bo and milling table, suitable for high- woodworking. It is easy to operate, save effort and expand the use of the trimming machine at the same time..
Check Stock

DCT Universal Router Table Saw Insert Base Plate Kit 3-7/8 2-5/8 1-1/4 Inches – Cutter & Porter-Cable Template Guide

  • BUILD A TABLE-MOUNTED ROUTER: The DCT Universal Router Table Saw Insert Base Plate Kit, 3-7/8, 2-5/8, 1-1/4” Inches – Cutter & Porter-Cable....
  • FITS MOST CUTTERS: 3/8-inch thick (1cm) phenolic router plate supports any router with removable baseplate.
  • 3 snap out bit ring openings 3-7/8 inches....
  • EASY TO INSTALL: 9-inch x 12-inch (22.9cm x 30.5cm) plate with pre-drilled table mounting holes.
  • Includes magnets and adjusting screws for securing....
  • BUILT TO LAST: Constructed from durable phenolic plastic to securely hold any router without flexing or warping when storing your router on (not....
  • CONTENTS: Package includes everything you need to mount your router to a table.
  • (1) router plate, (1) guide pin, (4) magnetic holders, (1) Allen....
Check Stock

Kreg PRS2100 Bench Top Router Table with Essential Accessories

  • INCLUDES: (1) Trim Router Table, (1) Transparent Bit Guard, (1) 1/4" Thick Acrylic Base, (1) Removable Fence, (2) T-Knobs, (1) Dust Port.
  • FUNCTION/EASY TO USE: For use with a trim router as a stationary router table for cutting, leveling, jointing, planing routing, and shaping small to mid-sized stock in your home or workshop.
  • Sets up quickly and the router can easily be detached from the table without tools.
  • COMPATIBILITY: The included router plate is designed with multiple predrilled hole patterns that work seamlessly with most trim routers. Fits DeWalt, Makita, Bosch, Ryobi and Porter Cable.
  • SMALL & PORTABLE: Sized for practical functionality, this compact router table can be easily set up on a workbench, table, shelf or any unoccupied work area of your shop – essentially anywhere you see fit.
  • FEATURES: High visibility bit guard to monitor your work, T-knobs that allow you make quick and precise fence adjustments, and an acrylic insert plate that possesses pre-drilled holes compatible with most trim routers on the market.
Check Stock

JessEm Rout-R-Table Stand Bundle with JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, Mast-R-Fence II Router Table Fence and JessEm Rout-R-Lift II Router Lift (4 Items)

  • Bundle Includes: JessEm Rout-R-Table Stand, JessEm Phenolic Mast-R-Top 24 x 32-Inch Router Table Top, JessEm Mast-R-Fence II Router Table Fence, JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5-Inch Diameter Motors.
  • Aluminum Dual Track: The JessEm Mast-R-Top comes with an extruded anodized aluminum dual track with a T-slot that accepts standard 1/4-inch hex head bolts or hex nuts and a standard 3/4-inch miter slot.
  • Router Table System: The table top comes pre-machined to fit JessEm’s Mast-R-Lift, Rout-R-Lift II, and Rout-R-Plate lift and router plates for building a router table system.
  • Premium Material: Made from laminated phenolic, which is one of the strongest, stable, and durable materials available for an industrial strength work surface.
  • Compatibility: The Table Top features a centered router opening measuring 9-1/4 x 11-3/4 inches that accepts most standard router plates and lifts (3/8-inch thick).
Check Stock