Categories

Best Kreg Clamp

KREG TOOL KHC6 Kreg Wood Project Clamp With Automaxx, 6'

  • Handheld clamps for Kreg Joinery, project assembly, general clamping, and more.
  • Large, non-marring pads evenly distribute clamping force.
  • Works with Kreg Jig R3 Clamp Pad Adapter, as well as with Kreg Portable Base.
Check Stock

Kreg Pocket-Hole Jig 720PRO with SK04 Pocket-Hole Screw Starter Kit

  • Bundle Includes Kreg Pocket Hole 720 PRO & SK04 Screw Kit.
  • Create pocket holes efficiently in material from ½" to 1 ½" thick with this multi-featured jig.
  • Clamp faster with one-motion clamping with Automaxx that automatically clamps and adjusts to the proper material thickness.
  • Get the ultimate benchtop setup with the included Kreg Docking Station, which features enhanced material support and added storage.
  • Kreg SK04 Contains six of the most popular Kreg screws that are Secured in a durable, easy-to-carry case.
Check Stock

Kreg 720PRO Pocket Hole Jig with SK03 Pocket Hole Screw Kit & KHC3 Automaxx 3' Clamp

  • Bundle Includes Kreg 720PRO Pocket Hole Jig, SK03 screw kit & KHC3 AutoMaxx 3" Clamp.
  • Create pocket holes efficiently in material from ½" to 1 ½" thick with this multi-featured jig Clamp faster with one-motion clamping with Automaxx that automatically clamps and adjusts to the proper material thickness.
  • Get the ultimate benchtop setup with the included Kreg Docking Station, which features enhanced material support and added storage.
  • Contains 675 of 5 most used screws that Includes self-tapping screw sizes for pocket-screw joinery all in a durable easy-to-carry case.
Check Stock

Kreg KBC3-SYS Bench Clamp System

  • Includes 3" (76mm) Bench Clamp, Clamp Plate, and mounting hardware.
  • Anodized-aluminum plate mounts flush with work surface.
  • Clamp automatically adjusts to match material thickness.
  • clamps materials up to 33/4" thick (95mm).
  • Clamp features an adjustment knob for built-in pressure control.
  • Extra-large padded clamp spreads clamping pressure evenly.
  • Ergonomic padded grips prevent hand fatigue.
  • Compatible with Kreg Clamp Trak and Clamp Vise.
Check Stock

Kreg KHCCC 90° Corner Clamp 2 PACK

  • Sold as 2 Pack Kreg KHCCC 90° Corner Clamp.
  • Works on 90° corners and “T” joints.
  • Cast aluminum “V” and Wedge Clamp pads.
  • Cutout allows driving a pocket-hole screw without removing Clamp.
Check Stock

ROCKLER 865042 Drawer Slide Jig, Blue

  • ...Slide Jig takes the guesswork out of mounting drawer slides by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.
  • Smooth Positioning: The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you'll know that your slides are positioned correctly, so your drawers will operate smoothly.
  • Incudes Two Brackets: The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet - one on each cabinet side - and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to protrude from the cabinet, and then clamp in place perfectly aligned to support the drawer as you mount the slides to the drawer box, too.
  • Easy to Use: Like other Kreg tools, this DIY drawer slide jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you'll use, a cla....
Check Stock

Kreg Hardware Installation Kit with Jigs and Two 3-Inch Face Clamps

  • This Hardware Installation + Pocket-Hole Jig Kit is great for cabinetry projects, and features two best-selling hardware jigs from Kreg.
  • Concealed Hinge Jig: Accurate hinge positioning with built-in indexing tabs. Reliable drilling with bit guide and stop collar..
  • Kreg Pocket Hole Jig 310: Portable jig for creating pocket-hole joints. Simple set up and easy to use with material-thickness stops..
  • clamps materials up to 2 3/4″ thick. Helps create a flush joint during pocket-hole assembly..
  • Includes 1 Concealed Hinge Jig, 1 Cabinet Hardware Jig, 1 Cabinet Hardware Jig and 2 Classic Face Clamps.
Check Stock

Kreg Tool Company - Drawer Slide Jig with Cabinet Hardware Jig with Concealed Hinge Jig and Two 2 Face Clamps

  • HARDWARE INSTALLATION KIT: Three easy-to-use Jigs plus two bonus Clamps in one specially-priced kit. With this hardware installation kit you can....
  • CONCEALED HINGE JIG: The Concealed Hinge Jig takes the guesswork out of installing cabinet doors using concealed hinges.
  • CABINET HARDWARE JIG: The Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls`.
  • DRAWER SLIDE JIG: The Drawer Slide Jig takes the guesswork out of installing drawer slides.
  • CLASSIC 2-INCH FACE CLAMP: Classic 2-Inch Face Clamps are designed for creating perfectly flush Kreg Joints, and they work great for lots of other....
Check Stock

Kreg KHC-Premium Face Clamp

  • clamps materials up to 2 3/4" thick (70mm).
  • Ergonomic padded grips for comfort and ease of use.
  • Helps create a flush joint during pocket-hole assembly.
  • Compatible with Kreg Pocket-Hole Jig R3’s Portable Clamp Adapter and 300-Series Pocket-Hole Jigs.
Check Stock

KREG KHC-MICRO Face Clamp, 2'

  • clamps materials up to 2-1/4" (57mm) thick.
  • Compact size fits easily into tight spaces.
  • Helps create a flush joint during pocket-hole assembly.
  • Compatible with Kreg Jig R3's Portable Clamp Adapter.
  • Ergonomic padded grip for comfort and ease of use.
Check Stock

Kreg KWS500 Track Horse Tool

  • Sturdy steel and aluminum construction supports 2, 200 lbs. As a pair.
  • Versatile design works as a sawhorse, work support, clamping center, and more.
  • Portable for easy transport and compact storage.
  • Expandable by pairing with another track horse or mobile project center.
  • Equipped with a Kreg bench Clamp featuring Automaxx.
Check Stock

POWERTEC 71438 T-Track Clamp Vice | Hold Down Clamps for T-Tracks Accepting 1/4 Inch hex head Bolts – 2 Pack

  • INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
  • FUNCTION: Designed to fit any standard t-track that accepts 1/4” hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
  • VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
  • CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Compatible with Kreg, Incra, Peachtree Mini and other ¼” T Track..
  • PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.
Check Stock

Kreg KWS1000 Mobile Project Center

  • Premium Folding Workbench: This portable work table can be a sawhorse, assembly table, and clamping station.
  • Handy Woodworking Tools: The workshop table has a 350-lb capacity and a storage shelf with a 25-lb capacity.
  • Home Improvement Tools: The bench track holds clamp.
  • table gives clamping capabilities of a bench vise.
  • Secure Workshop Accessories: Bench dogs, drill holsters, and storage holes in mobile workbench secure supplies.
  • Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome.
Check Stock