Categories

Best Lag Bolts For Pergolas

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock

OZCO 56637 Laredo Sunset 8-inch Post to Beam Bolt Inline Connector, (2 per Pack)

  • (4) 2-3/4-inch OWT Timber Screws for bottom hole placement only.
  • Four OWT Timber Bolts are required and sold separately.
  • Approved for use with ACQ treated lumber.
  • Rest the heavy beam on the ledge while you secure the bolts.
  • Material constructed of 3/16-inch galvanized steel with a beautiful black powder coated finish.
  • Recommended for roofs, larger pavilions, pergolas and rafters.
Check Stock

Heavy Duty Bolts, Concrete Anchors TV Wall Mount Screws Kit for Mounting A TV Into Wood Or Concrete

  • Re-mounting, but lost your old hardware? This kit includes everything you’ll need for wood or concrete installs..
  • Our lag bolts are custom-hardened to prevent snapping or breaking..
  • Note: Concrete anchors are not compatible with wood and drywall.
  • If you have any question? contact us please..
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

  • EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
  • HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
  • PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
  • EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
  • REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....
Check Stock

1/2 in x 8 in Black Exterior Carriage Bolt Kit Includes 12 Bolts 12 Washers and 12 Nuts Ceramic Black Coated for Exterior Use BLAKOTE - 2X Rust Resistance of Galvanized by Makers Bolt

  • Carriage bolts are designed to fasten a wood member to either wood or metal.
  • Each kit includes 12 carriage bolts, 12 USS thick washers, 12 hex nuts.
  • Black Ruspert coated for superior rust resistance (2X protection compared to galvanized) and a matte black appearance. Suitable for use in ACQ pressure treated wood..
  • The flat head provides a semi-flush finish and is perfect for decks, gazebos, pergolas, and other heavy duty applications..
  • 1/2 in diameter for heavy duty holding power..
Check Stock

ECKJ Hex Lag Bolts 112PCS M6 Hex Head Lag Screws Washers Assortment Kit Fully Thread Heavy Duty Hexagon Wood Screw Zinc Plated Black Metric Length Include 16/20/25/30/35/40/45/50/60mm

  • 【112PCS of 9 Sizes】 Hex head diameter is 10mm, thread diameter is 6mm, 9 sizes of screw length are 16mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm. Flat washer outer diameter is 12mm..
  • 【Quality Material】 Black lag screws are made of high quality carbon steel, high hardness and with beautiful appearance, zinc plated is smooth and anti-rust..
  • 【Lag Screw with Washer】 these bolt screws feature deep wood screw coarse threads for superior holding. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Wide Application】These metal wood screws are great for exterior household and industrial applications such as pergolas, garden beds, mailboxes, deck building, joining lumber or any DIY projects..
  • 【Note】 This item contains small and sharp parts, please keep it away from kids. We guarantee 100% satisfied after-sales service! If you had a problem, please let us know before leaving a review..
Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock

Venzo Bike Bicycle Bench Mount Clamp Repair Rack Stand Work Stand - Bike Maintenance

  • BENCH MOUNT: Bike repair stand mounted on a bench is more stable than portable and foldable repair stand. It can handle harsh bike mechanic or....
  • FULL METAL: The workstand is made of heavy duty steel except rubber protection coating. No more broken parts! With it's 360 degree turning and side....
  • MOUNTING HOLES: Mounting flange has four predrilled holes, allowing use of bolts or lag bolts to mount ( Mounting bolts not included )..
  • DURABLE: We understand what kind of workstand riders need. The quick release & bolts are both heat treated and approved not to be stripped anytime.....
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..
Check Stock

LaBear 3/8\ Drive to 1/4\ Hex Drive Quick Change Impact Adapter (3/8\DR to 1/4\H)

  • Fits: 1/2” Lag bolts (Hard Heads), 5/8”, 3/4”, & 1/2” square headed bolts and nuts.
  • Handle Type: Non-conductive and Lightweight.
Check Stock

5 Steps Outdoor Hand Rails for Steps, Black Wrought Iron Handrail Kit

  • Railings for Outdoor Steps- This Iron Stair rail is designed to be a hand rail outdoor (also great replacement for wooden handrails)..
  • DIY Iron Handrail- Designed to be installed yourself!.
  • Versitle Installation- Can be used as outside hand railing, outdoor handrails, stair rails, hand rails for stairways, front porch hand rail (we provide flat mount bracket for free), etc.
  • Parts Included- Anchor bolts, lag screws, masonry drill bit & hex screw bit (some 2021 inventory in warehouse has older gold version anchors and no lag screws. Contact us for free hardware replacement if needed..
  • NOTE: For sale is a 5.5 feet railing (Intended for 4-5 steps).
Check Stock