Categories

Best Lag Bolts For Railing

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a black INDOOR cable railing system,....
Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

  • This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
  • Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
  • This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
  • This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
  • Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
  • If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
  • By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock

VEVOR Handrail Outdoor Stairs 47.6 X 35.2 Inch Outdoor Handrail Outdoor Stair Railing Adjustable from 0 to 30 Degrees Handrail for Stairs Outdoor Aluminum Black Stair Railing Fit 3-4 Steps

  • Railings for Outdoor Steps- This Iron Stair rail is designed to be a hand rail outdoor (also great replacement for wooden handrails)..
  • DIY Iron Handrail- Designed to be installed yourself!.
  • Versitle Installation- Can be used as outside hand railing, outdoor handrails, stair rails, hand rails for stairways, front porch hand rail (we....
  • Parts Included- Anchor bolts, lag screws, masonry drill bit & hex screw bit (some 2021 inventory in warehouse has older gold version anchors and no....
  • NOTE: For sale is a 5.5 feet railing (Intended for 4-5 steps).
Check Stock

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance（as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance（as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Muzata 330Feet 1/8inch Stainless Steel Wire Rope Aircraft Cable Railing Decking 7x7 Strand Indoor Outdoor DIY Balustrade with 1pc Cable Cutter WR01,WP1

  • This is Non-Turnbuckle System according to principle of screwing L&R handed thread lag at the same direction and the both lags will go into the opposite direction，So the cable will be tightened by the R&L handed thread lags without torsion force and damage.
  • The length of cable spanning capability of this kit is the same as other common cable railing kits；.
  • This cable railing hardware was made of Marin Grade T316-Stainless Steel, and it can be used indoor and outdoor.
  • The total length of this lag is 4.1 inch，Length of thread bar is 2 inch，this cable railing lag fit standard 1/8 inch（3.2mm）steel wire rope；and the length of cable is 1 inch shorter than the distance of inner edges of posts which on both sides usually to be recommended；.
  • This Right&Left hand thread screw lags are connected with cable need by using hydraulic crimper(This item not include)，and this item go with a correct size dill bit and a special wrench.
  • When you really understand this non-turnbuckle system，you will find the swage turnbuckles and other trivial parts are not necessary in cable railing system，And this system will be more durable and beautiful..
Check Stock

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

Muzata 20Pack 3/16\ Invisible Cable Railing Kit Swage Lag Screw Tensioner CableGenie T316 Stainless Steel Completely Hidden for for 4x4 6x6 8x8 Wood Posts Deck Stairs CR99, CV1 CG1

  • ...get a neat appearance, and get enough tension to pass 4”sphere test to meet code compliance.The customized socket wrench Muzata CT16 is essential for invisible installation and keeps the cable from spinning when tightening. The package includes 20 packs of tensioners, 40pcs aluminum ferrules.
  • Reusable - Most cable railing hardware is irreparable after swaging with wire rope. If you get a wrong measurement or need adjustment, you have to waste materials and restart over. However, this lag screw can be reused by just replacing the aluminum ferrule whenever you want to remeasure or rebuild a cable railing system.
  • One-Post Corner Solution - With a well-designed compact body, you could use two invisible lag screws at one corner post of 4”x4” to 10”x10”, and they won't hit with each other. It could also work on both level and angled sections without angled washers. This cable railing kit is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System - We pre-designed a CableGenie cable railing system to help you construct a hidden wood system, which includes cable railing kit CR99,3/16” wire rope WR14, adhesive sleeve CR91, drill gu....
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit（Single lag screw） made of high quality Marine Grade T316-Stainless Steel，It is anti-rust、 durable and easy to maintain；.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted；So they can be used to all kinds of complex cable railing system：railing of stairs，deck railing and Garden fence…；.
  • This cable railing hardware applies to standard 1/8" inch cable（OD）， Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation；The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage：high quality、easy to install and looks clean..
Check Stock

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

  • 1.【Premiun Material ＆ Mighty Grip】Heavy duty screw bolts are made from 304 stainless steel and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners.These lag bolts for wood is coarse threads for superior holding, will not strip off..
  • 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2"，3/8×2"，3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
  • Quantity: 60 pieces screws and washers in total (30 sets)..
  • 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber，and DIY design..
  • 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous ins....
Check Stock

Mounting Dream Lag Bolt Kit for TV Wall Mount Comes with M8 Lag Bolt for Wood Stud Fischer Anchors for Concrete Wall Includes Allen Key and Bubble Level for Easy Installation MD5753

  • NO CONCERN ON RE-MOUNTING - Need to re-mount your TV but no extra lag bolts or concrete anchors? This kit includes m8 lag bolts for TV wall mounts and concrete wall anchors..
  • HEAVY DUTY - Our m8 lag bolts are made of durable steel material, capable of heavy duty. They can keep your TV secure on the TV wall mount..
  • CONCRETE/BRICK WALL INSTALLATION - Wall type of your house is concrete/brick wall and need anchors? No need to waste your time getting to the hardware store. This lag bolt kit includes 6 Fischer UX 10x60 R concrete wall anchors..
  • EXTRA TOOLS FOR EASY INSTALLATION - This lag bolt kit also comes with allen key and bubble level. Make your job easier and save your time..
  • GREAT CUSTOMER SERVICE - Have any questions about the specification or installation? We are glad to provide help on pre-purchase or installation questions for our customers at any time..
Check Stock

Mounting Dream Lag Bolt Kit for TV Wall Mount Comes with M7 Lag Bolt for Wood Stud Fischer Anchors for Concrete Wall Includes Allen Key and Bubble Level for Easy Installation MD5752

  • NO CONCERN ON RE-MOUNTING - Need to re-mount your TV but no extra lag bolts or concrete anchors? This kit includes M7x55mm lag bolts, Allen Key, Level and Fischer UX10x60 R..
  • HEAVY DUTY - Our M7 lag bolts are made of durable steel material, capable of heavy duty. They can keep your TV secure on the TV wall mount..
  • CONCRETE/BRICK WALL INSTALLATION - Wall type of your house is concrete/brick wall and need anchors? No need to waste your time getting to the hardware store. This lag bolt kit includes 6 Fischer UX 10x60 R concrete wall anchors..
  • EXTRA TOOLS FOR EASY INSTALLATION - This lag bolt kit also comes with Allen key and bubble level. Make your job easier and save your time..
  • GREAT CUSTOMER SERVICE - Have any questions about the specification or installation? We are glad to provide help on pre-purchase or installation questions for our customers at any time..
Check Stock