Categories

Best Lag Bolts With T Handles

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

  • 【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
  • 【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
  • Length from 1'' to 3''. Thread Type are all Coarse (standard).
  • Quantity: 155 pieces screws and washers. Refer to Figure 2..
  • 【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
  • 【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....
Check Stock

Heavy Duty Bolts, Concrete Anchors TV Wall Mount Screws Kit for Mounting A TV Into Wood Or Concrete

  • Re-mounting, but lost your old hardware? This kit includes everything you’ll need for wood or concrete installs..
  • Our lag bolts are custom-hardened to prevent snapping or breaking..
  • Note: Concrete anchors are not compatible with wood and drywall.
  • If you have any question? contact us please..
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2 x 1-1/2 Qty 250

  • Stainless Steel 316 Lag Screws Hex Head Lag Bolts 1/2".
  • Commonly referred to as a lag screw or lag bolt.
  • Features the sharp cutting threads of a wood screw.
  • Commonly used in heavy duty carpentry applications including lumber framing and anchoring equipment to wood such as machinery and large vices.
  • 316 stainless steel is highly corrosion and rust resistant.
Check Stock

RowithmA Mailbox Flag Front Mount Flag 4\ x 2\ x 0,4\

  • Protect your mailbox from winter weather, vandalism, snow plow damage and other road-side hazards..
  • Durable, double wall, recyclable, maintenance free construction..
  • Address numbers, reflective decals, wood lag bolts, washers and zip ties included..
  • Anchors into the ground with your choice of t-stakes, 2x4s or 4x4s, (not included), for protection in light to heavy duty conditions..
Check Stock

Pit Posse Drive Spinning T-Handle Wrench – 3/8” Ball-Bearing Rotating 3/8 T-Handle Tool – Remove Or Install Your Bolts Faster – Motorcycle Tools

  • ...ip is fixed onto the shaft and will enable you to apply pressure comfortably..
  • ✅REMOVE OR INSTALL BOLTS FASTER- The collar has bearings and allows the t handle to spin and help you take your bike apart or put it back together faster. Once you have felt the spin, you will never be able to go back to your standard T-handles again. The t handle allows you to apply pressure to the fastener that you're taking in or out and then spin it very quickly in and out to get the job done fast..
  • ✅THE PERFECT ADDITION TO YOUR TOOLBOX- Our spinning T-handle is the go-to tool for all motorcycle enthusiasts. If you’re doing a lot of work on engine cases or many bolts, you’re going to love this tool! Perfect for motorcycles and bicycles. Works great for working on or rebuilding motorcycle engines, and a great tool to have when you have plenty of bolts to spin down. You need this in your toolbox!!.
  • ✅ YOUR SATISFACTION IS OUR #1 PRIORITY- We take pride in manufacturing motorcycle parts that save you time and money while not compromising on quality. Your safety and performance are what matters most. If you have any questions or concerns about your product, please reach out to us and we would be happy to assist you..
Check Stock

REDCAMP Indoor Hammock Hanging Kit Heavy Duty 304 Stainless Steel Hammock Wall Mount Kit 800 lb Capacity

  • EXPANSION SCREWS: This hammock hanging kit contains 2 expansion bolts and 2 lag screws. Expansion bolts are the best choice for concrete wall, lag....
  • HEAVY DUTY HAMMOCK HANGING HOOKS: the screws and washers are exceedingly heavy and thick, made out of 304 stainless steel and galvanized, support up....
  • PERFECT FOR BOTH INDOOR AND OUTDOOR USE: this set of high quality hammock hooks and carabiners can be adjusted to the ceiling of your garage or room,....
  • EASY AND FAST SET UP: This hammock holder is really easy to install, a spanner and a drill will be completely enough..
  • REDCAMP GUARANTEE: Your 100% satisfaction has always been our top priority. That is why all of our products are backed by our unconditional 365-day....
Check Stock

SureFit Universal T-Handle Kit w/Long & Short Bolt Hardware Set for Snow Blowers 504-01098

  • Compatible with most lawn mowers, snow throwers, and other outdoor equipment.
  • Contains two short bolts, two large bolts, and two T-Handles.
Check Stock

Venzo Bike Bicycle Bench Mount Clamp Repair Rack Stand Work Stand - Bike Maintenance

  • BENCH MOUNT: Bike repair stand mounted on a bench is more stable than portable and foldable repair stand. It can handle harsh bike mechanic or....
  • FULL METAL: The workstand is made of heavy duty steel except rubber protection coating. No more broken parts! With it's 360 degree turning and side....
  • MOUNTING HOLES: Mounting flange has four predrilled holes, allowing use of bolts or lag bolts to mount ( Mounting bolts not included )..
  • DURABLE: We understand what kind of workstand riders need. The quick release & bolts are both heat treated and approved not to be stripped anytime.....
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan..
Check Stock

OSOBAK General Installation Accessory for Hard Tonneau Cover

  • *FITMENT: OSOBAK Series Hard Quad or Tri Fold Tonneau Cover.
  • *Inventory:2pcs*Knob,2pcs*Alu Block,4pcs* clamp handles with pins,4pcs*T bolts and plastic sliding,4pcs*handle lids,,1pcs*buckle mount,1pcs*buckles,1pcs*buckle holder,1bag* S/S M4 bolts,1Bag* R security Pin and manual.
  • *Usage:Easy Intallation,back up for the replacement.
  • *Notice:Pls contact with us before ordering, if you don't know about the accessory you need for the OSOBAK tonneau cover.
Check Stock

LaBear 3/8\ Drive to 1/4\ Hex Drive Quick Change Impact Adapter (3/8\DR to 1/4\H)

  • Fits: 1/2” Lag bolts (Hard Heads), 5/8”, 3/4”, & 1/2” square headed bolts and nuts.
  • Handle Type: Non-conductive and Lightweight.
Check Stock

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

  • Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
  • Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
  • Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
  • Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
  • Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.
Check Stock

Occult Kayak Handles (2 Pack) - Hardware Kit Included, Durable Replacements, Easy Installation - Kayak and Boat Accessories

  • ...le. This includes lockable nuts and bolts. With four different holes in each handle, there are multiple points of contact to allow the pressure from your kayak to spread over more surface area..
  • EXTREME STRENGTH: For all marine kayak and canoe carrying! Having the extra bolt locations for each handle allows the handles to lift up to 100 pounds. The outside of the handles is lined with a hard rubber while the inside is a solid core to maintain shape. Where the bolts are placed there is also hard plastic to help secure the handles in place..
  • HEAVY-DUTY & DURABLE: Made with high-quality material and hardware these handles are ready for any challenge thrown at them. Carry or grab your kayak on the beach/ocean with the help of this kayak holder. Enjoy your adventures without worrying about the handles of your kayak..
  • EASY PARTS INSTALLATION: Once you've chosen a spot on your kayak, mark where you want your bolts to go in and drill four small holes for each handle. Once they're in place, grab the hardware and secure the handles in place. Put the bolts through and put the nuts on the back. For an even more secure fit, put a waterproof sealant along with the hardware..
  • COMFORT: The pull handles have a softer rubberized plastic exterior that is wov....
Check Stock