Categories

Best Lag Bolts With Threaded Inserts

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

8 Pack Threaded Star Type 5/8\(OD) Round Tubing Insert 1/4-20 Threads S72-204

  • THREADED INSERTS FOR PLASTIC – E-Z LOK Thread Inserts for plastic. Available in brass threaded inserts and stainless steel threaded inserts. Install cold..
  • EASY INSTALLATION – A slotted design allows for cold installation of these metal threaded inserts with no heating required, eliminating the need to chase threads after molding..
  • FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for post-molding installation in either thermoset plastics, thermoplastics, or 3D printed parts..
  • AVAILABLE IN 3 STYLES – Available in flush threaded inserts, flanged threaded inserts, and reverse slot threaded inserts..
  • STRONG THREADS MADE EASY – All three types of thread inserts press into place for fast, easy installation..
Check Stock

20pcs M10 x 1.25 x 1.5D Wire Thread Insert Stainless Steel Metric Helicoil Type Thread Repair Insert

  • THREADED INSERTS FOR PLASTIC – E-Z LOK Thread Inserts for plastic. Available in brass threaded inserts and stainless steel threaded inserts. Install cold..
  • EASY INSTALLATION – A slotted design allows for cold installation of these metal threaded inserts with no heating required, eliminating the need to chase threads after molding..
  • FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for post-molding installation in either thermoset plastics, thermoplastics, or 3D printed parts..
  • AVAILABLE IN 3 STYLES – Available in flush threaded inserts, flanged threaded inserts, and reverse slot threaded inserts..
  • STRONG THREADS MADE EASY – All three types of thread inserts press into place for fast, easy installation..
Check Stock

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

1/4-20 Threaded Insert Kit for Wood Furniture Screw Threaded Wood Insert Nut 10mm 15mm 20mm Length 61-Piece

  • 20 pieces of 1/4-20 x 20 mm threaded inserts + 20 pieces of 1/4-20 x 15 mm threaded inserts + 20 pieces of 1/4-20 x 10 mm threaded inserts + 1 piece 6mm hex key..
  • Threaded inserts are made of carbon steel, they feature durable construction for a long-lasting hold..
  • Threads diameter of 1/4-20 x 20mm / 15mm: 0.410" / 10.4mm, threads diameter of 1/4-20 x 10mm: 0.389" / 9.9mm..
  • Threaded Inserts are best for composite materials, soft wood, plywood and hardwood, you just need to drill a hole that the size of the body into the wood for the threaded insert..
  • Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation..
Check Stock

Pactrade Marine Boat Tracker Versatrack Adjustable Drink Holder/Lund Sport Track Folding Adjustable Cup Holder (Black, 1 pcs)

  • INCLUDES: (10) Seven Star Knobs, (10) T-Bolts, (10) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal and double cut t-track – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies. Head is 17/32” wide and WILL NOT FIT ¼” T-TRACK. . Before ordering, please verify the width of your t-track..
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock

50 Pieces 1/4-20 Threaded Inserts for Wood Nutsert Furniture Screw-in Nut 15mm Length Hex Drive

  • 1/4-20 threaded inserts for woodworking applications, 15mm length, hex drive Allen key included..
  • Threaded inserts are easy to install, simply drill the appropriately sized hole and Install the inserts with the hex key provided or other optional drive tools you have..
  • 1/4-20 threaded inserts are the ideal solution for softwood, hardwood, plywood, MDF, and composition board..
  • Threaded inserts head diameter: 0.461″ / 11.7mm, body diameter: 0.315″ / 8mm, threads diameter: 0.410″ / 10.4mm..
  • In Softwood, recommended drill bits for these threaded inserts are 8.5mm, 9mm, 9.5mm / 3/8″. In hardwood such as white oak or maple, recommended drill bits are 9.5mm, 3/8 inch, or 10mm..
Check Stock

POWERTEC 71482 T-Track Knob Kit w/ 7-Star 5/16 Threaded Knob, Bolts and Washers for Woodworking Jigs and Fixtures – 10 Pack

  • INCLUDES: (10) Seven Star Knobs, (10) Bolts, (10) Washers and (1) Storage Case.
  • FUNCTION: Helps secure, clamp down and optimize numerous t-track, fences, routing jig and fixture assemblies – accepts any application that utilizes a 5/16”-18 internal thread (also accepts most ¾ inch wide by 3/8 inch deep tracks).
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your lathe, featherboards, saw, drill press and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8 cm x 2.5cm) | threaded knob is 5/16-inch (7.9mm) diameter by 18 threads per inch | Bolts and washers are 5/16”-18 x 1-1/2-inch.
Check Stock

E-Z Lok Threaded Insert, 18-8 Stainless Steel, Helical, #6-40 Internal Threads, 0.138\ Length (Pack of 10)

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The threaded inserts are designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock

E-Z LOK Threaded Insert for Plastic Straight Flanged Brass Thread Inserts 10-32 Pack of 50

  • THREADED INSERTS FOR PLASTIC – E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials..
  • EASY INSTALLATION – Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation..
  • FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts..
  • AVAILABLE STYLES – Straight E-Z Sonic inserts are available in flush or flanged configuration to meet your material thickness requirements..
  • STRONG THREADS MADE EASY – High-quality brass threaded inserts are available with both inch and metric threads..
Check Stock

E-Z LOK Threaded Insert for Plastic Straight Flanged Brass Thread Inserts 8-32 Pack of 100

  • THREADED INSERTS FOR PLASTIC – E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials..
  • EASY INSTALLATION – Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation..
  • FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts..
  • AVAILABLE STYLES – Straight E-Z Sonic inserts are available in flush or flanged configuration to meet your material thickness requirements..
  • STRONG THREADS MADE EASY – High-quality brass threaded inserts are available with both inch and metric threads..
Check Stock

E-Z LOK Threaded Insert for Plastic Straight Flanged Brass Thread Inserts 1/4-20 Pack of 50

  • THREADED INSERTS FOR PLASTIC – E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials..
  • EASY INSTALLATION – Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation..
  • FOR USE WITH APPLICATIONS – The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts..
  • AVAILABLE STYLES – Straight E-Z Sonic inserts are available in flush or flanged configuration to meet your material thickness requirements..
  • STRONG THREADS MADE EASY – High-quality brass threaded inserts are available with both inch and metric threads..
Check Stock