Categories

Best Lanzar Capacitor

Lanzar Upgraded Opti Pro 6.5” High Power Coaxial Speaker - Powerful 400 Watt Peak 65Hz – 7 kHz Frequency Response 30 Oz Magnet Structure 4 Ohm w/ Glass Fiber Cone and Butyl Rubber Surround - OPTI6PM

  • 65Hz - 7 kHz FREQUENCY RESPONSE: Lanzar, 6.5” high power performance coaxial speaker has 30 oz magnet structure, vas at 11 liter and frequency....
  • POWERFUL 400 WATTs: This 6.5” full range speaker provide up to 400 watts peak power because it is equipped with 30 oz. housed structure. It's all....
  • 4-OHM MIN IMPEDANCE: This coaxial car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars.....
  • CCAR VOICE COIL: Lanzar speakers are capable of 1.5” higher or elevated temperature strength and fatigue properties. It will increase performance....
  • OPTI6PM TEMPLATE: Lanzar upgraded car speaker measures 6.97'' in overall diameter with a mounting depth of 2.95''. The high-quality glass fiber cone....
Check Stock

Lanzar Upgraded Opti-Drive Pro 6.5” High Power - 1000 Watt Peak 180Hz – 22 kHz Frequency Response 75 Oz Magnet Structure and 4 Ohm Mid-Bass w/ Compression Horn Tweeter Full Range Speaker - OPTI6HPRO4

  • 180Hz - 22 kHz FREQUENCY RESPONSE: Lanzar, opti-drive pro 6.5” high power speaker has 75 oz super strontium ferrite magnet structure, 94 dB and....
  • POWERFUL 1000 WATTS: This 6.5” full range speaker provide up to 1000 watts peak power because it is equipped with 75 oz. housed structure. It's all....
  • 4-OHM MIN IMPEDANCE: This mid bass car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars.....
  • CCAW VOICE COIL: Lanzar speakers are capable of 1.5” higher or elevated temperature strength and fatigue properties. It will increase performance....
  • OPTI6HPRO4 TEMPLATE: Lanzar upgraded car speaker measures 6.85'' overall diameter with a mounting depth of 2.95''. The high-quality black paper cone....
Check Stock

Lanzar Upgraded Standard 6.5" 3 Way Triaxial Speakers - Full Range Sound w/ 200 Watts and 4 Ohms Impedance 2” Titanium Cone Midrange 65 - 20 kHz Frequency Response and 15 Oz Magnet Structure - MX63

  • 65 - 20 kHz FREQUENCY RESPONSE: Lanzar, standard 3-way car speaker system has robust 15 oz. magnet structure and frequency response that complete the package. Also, pack with 2'' titanium cone midrange and super piezo tweeter for sweet highs.
  • POWERFUL 200 WATTs: These 6.5" car speakers provide up to 200 watts of two-way sound because it's equipped with 15 oz. housed structure. It's all housed in a glossy black coated steel basket that looks great.
  • 4-OHM MIN IMPEDANCE: This triaxial car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. Includes custom wire-mesh grills, wires and installation hardware for easy setup.
  • ALUMINUM VOICE COIL: Lanzar speakers are capable of 1” higher or elevated temperature strength and fatigue properties. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • MX63 TEMPLATE: Lanzar upgraded car speaker measures 72mm x 72mm with a mounting depth of 2.32''. The high-quality injection cones and non-fatiguing butyl rubber surround provide a strong foundation.
Check Stock

LANZAR Upgraded Opti Pro 6.5 High Power MidBass - Powerful 500 Watt Peak 105Hz 12 kHz Frequency Response 30 Oz Magnet Structure 4 Ohm w/Paper Cone and Foam Surround Full Range Speaker - OPTI6MI

  • 105Hz - 12 kHz FREQUENCY RESPONSE: Lanzar, 6.5 high power performance speaker has 30 oz magnet structure, vas at 9.46 liter and frequency response that complete the package. Also, pack with exceptional 94dB (1w/1m) decibel sensitivity.
  • POWERFUL 500 WATTs: This 6.5 full range speaker provide up to 500 watts peak power because it is equipped with 30 oz. housed structure. It's all housed in durable die-cast aluminum frames.
  • 4-OHM MIN IMPEDANCE: This midbass car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of todays cars. Includes custom molded grill and hardware for easy setup.
  • CCAR VOICE COIL: Lanzar speakers are capable of 1.5 higher or elevated temperature strength and fatigue properties. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • OPTI6MI TEMPLATE: Lanzar upgraded car speaker measures 6.97'' in overall diameter with a mounting depth of 3.03''. The high-quality black paper cone accordion cloth surround with resin coated provides a strong foundation.
Check Stock

Pyle in-Dash Marine Boat AM/FM USB AUX Radio Headunit Receiver Bundle Combo with 4 x 6.5 2-Way White Audio Speakers 4-Channel Waterproof Amplifier Radio Shield Speaker Wire Antenna

  • PACKAGE BUNDLE INCLUDES: Pyle PLMRB29W Marine Receiver, 4 x Lanzar AQ6CXW 6.5" Speakers, Pyle PFMRA450BW 4-Channel Amp, Enrock EMCWT1 Radio Shield,....
  • HEADUNIT RECEIVER/RADIO SHIELD: This Pyle radio is equipped with a AM/FM, SD/USB slots, plus an aux-in jack to listen to your favorite music. It's....
  • 6.5" SPEAKERS: Lanzar's AQ6CXW speakers are waterproof and designed for use in your boat, on the dock, by the pool, or simply mounted outside. They're....
  • 4-CHANNEL AMPLIFIER: This Pyle 4 channel Marine Amplifier that has an incredible sound and lots of power without the distortion. It could run for....
  • SPEAKER WIRE/RADIO ANTENNA: The Enrock marine speaker wire is water-resistant, so it's ideal for use in your new marine installation. The rugged....
Check Stock

LC200A Inductance Inductor Capacitance Capacitor L/C Multimeter Meter Tester

  • This MESR-100 V2 auto-ranging capacitor ESR and low Ohm meter measuring range is 0.001-100.0R, support in circuit testing..
  • It is the series resistance inside the capacitor, and 100kHz is used to remove the impedance 1/(2*pi*F*C). When the impedance becomes smaller, the real series resistance value can be measured to determine whether the capacitor is bad/damaged or in good condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.【Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.】.
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check.Equipped with a SMD alligator clip for more accurately testing..
Check Stock

Sealed Unit Parts MFD10 LED Display Digital Capacitori Tester

  • The Supco Capacitor Tester is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Supco Capacitor Tester provides the fastest measurements of capacitor values with one hand operation.
  • Supco MFD10 has accuracy ± 5% and range of 0.01 to 9,999 MFD.
  • The high quality Supco Capacitor Tester includes soft carying case for easy transport of device and test clips.
  • Repair your appliance with confidence when you choose Supco Capacitor Tester.
Check Stock

Capacitor 45 5 MFD 370V Dual Run Round Capacitor for Condenser Straight Cool or Heat Pump Air Conditioner

  • 45 5 / MFD 370 volt AC capacitor: round dual run capacitor.
  • Size: the dual run capacitor measures 3.88 x 2 inches/ 9.86 x 5 cm.
  • Range of temperature: the round capacitor can work from -40u2109 to 158u2109/-40u2103 to 70 u2103.
  • UL certificate: This dual run capacitor is built to the toughest USA standards for AC motor run capacitors including EIA-456-A and IEC 60252-1:2001.
  • Note: 370 45 4 capacitor compatible with GE C3455R, 97F9895, Z97F995, 97F9895BZ3, 27L880, TRCD455, 97F9895.
  • The brand and model mentioned above is just for demonstrating capability.
Check Stock

USA Made Capacitor Oval 10 uf MFD 370 Volt 97F9002, 97F9002s (Replaces Old GE# 97F9002BZ3, Z97F9002, 27L669), 10 MFD at 370 Volts

  • Replacement Oval Run Capacitor for GE 621435.
  • Used in a wide variety of applications to keep them running at optimum performance.
  • Replace your capacitor when it is bulging, leaking, or when there is no continuity accross the terminals.
  • When buying a capacitor: The voltage should be higher or equal but not lower to the original capacitor. The capacitance (uf, mfd) should match the original capacitor. The Hz should match the original capacitor. The terminal type should match the original capacitor. The size and shape should be considered only when the space in the application is limited..
Check Stock

LG EAE32501017 Genuine OEM Capacitor for LG Refrigerators

  • This LG Capacitor is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
  • Replacement LG brand Refrigerator Capacitor helps keep the refrigerator motor running.
  • LG EAE32501017 Refrigerator Capacitor is a 450 Volt AC 50/60 Hz Radial Capacitor.
  • High quality LG OEM EAE32501017 Refrigerator Capacitor is manufactured with premium materials for durability and exact fit, be sure to follow instructions in owners manual when installing this part.
  • Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.
Check Stock

EVERICA 35+5 uF 35/5 MFD ±6% 370V/440VAC CBB65 HVAC Dual Run Circular Start 35/5 440v Capacitor for AC Air Conditioning Run Capacitor Motor Run Fan Start or Condenser Straight

  • ★ Economical Money Saving and Easy to Install HVAC AC Capacitor 35/5 - Made Exactly to Fit for Most Top Brand Industrial 5 MFD Capacitor.
  • ★ Durable Grade Premium 35/5 Capacitor for AC Compatible with most Carrier AC Capacitor - Meets or Exceeds OEM Specifications Quality. Comes Brand New in Original Retail Packaging.
  • ★ No Questions Asked Money Back Guarantee. Capacitor for AC 35/5 440 comes with 5 Year Warranty or 90 Day Returns. Satisfaction Guaranteed Buy with Confidence.
  • ★ EVERICA Dual Run Capacitor 35/5 440v 50/60hz Operating temperature: -40℃ to +85℃ / -40℉ to +185℉. Safety rated: 10,000 AFC. AC Capacitor 35/5 440 volt. Compatible With Most Cylindrical HVAC Capacitor 35/5 Industrial Electrical Capacitors.
  • ★ Replacement for 97F9834 , Z97F9834 , HC98JA036 , P291-3553R , HC98CA036 , HV98CA035 , 97F9834, R100335-05, 89M73, HC98JA036D , TT-CAP-35/5/440R, RC0102 , TRCFD355 , 12283 , Z97F9848 , Z97F9899 , 97F9899 , cap050350440rs , 12266 , TP-CAP-35/5/440R.
Check Stock

GE Microwave Replacements , 20W Halogen Lamp Bulb Replaces WB25X10019,Pack of 3

  • ※ 1、Production Name: High Voltage Capacitor for Microwave, Wistand Voltage: 2100 V AC, Capacitor Volume: 0.91 uF MFD, Tolerance:+/- 3%, OverView Size: 53x33x80 mm/2.1x1.3x3.1 in, Connect Pin:4.8x0.5mm/0.19x0.02in.
  • ※ 2、Kindly Remind: This 0.91 uF capacitor's connect terminal size is4.8x0.5mm/0.19x0.02in(3/16 in standard terminal), please check your original pin size before you replacement.
  • ※ 3、Completely compatible for GE WB27X10011 and Samsung 2501-001011 DE96-00269A and other same size capacitor for Amana Electrolux Ge Kenmore Whirlpool, directly replace,Part Number TJ13QBP21090 replaces 13QBP0299, 13QBP21090, 505766 and more..
  • ※ 4、Terminals 2+2,each pole has 2 terminals, Embody one 10M ohm resistance inside high voltage capacitor inside and it will release high voltage during idle or shut down time, ensure safe,REPAIR PART FOR AMANA, ELECTROLUX, GE, KENMORE, MAYTAG.
  • ※ 5、CQC and VDE certificated, executed EN61270-1 standard, ensure safe enough,1 year warranty ,Universal and professional and compatible microwave high voltage capacitor for GE Samsung LG Media Hair Amana Kenmore Mayta microwave, completely replace for GE WB27X10701 high voltage capacitor.
Check Stock

Canamax 35+5 MFD uf 370 VAC or 440 Volt Dual Run Round Capacitor - Replacement for Condenser Straight Cool or Heat Pump Air Conditioner 35/5 Microfarad - Replaces 97F9834 Z97F9834

  • Replacement Dual Round Run Capacitor for GE M24P3730W05.
  • Used in a wide variety of applications to keep them running at optimum performance.
  • Replace your capacitor when it is bulging, leaking, or when there is no continuity accross the terminals.
  • When buying a capacitor: The voltage should be higher or equal but not lower to the original capacitor. The capacitance (uf, mfd) should match the original capacitor. The Hz should match the original capacitor. The terminal type should match the original capacitor. The size and shape should be considered only when the space in the application is limited..
Check Stock