Categories

Best Laptop Mount And Lock Kit

MOUNT PRO Single Laptop Mount with Tray for Laptop up to 17 inches, Holds Up to 17.6 lbs, Fully Adjustable Notebook/Laptop Desk Mount Stand, Heavy Duty Laptop Arm Mount with Clamp and Grommet Base

  • Universal Monitor Laptop Mount ​with Notebook Tray - With an extra long 16" monitor laptop arm for easy adjustment, this sturdy laptop monitor stand ​fits most 13"-27" monitors up to 22lbs..
  • Full-Motion Laptop Monitor Mount - The monitor and laptop mount is full-motion and height adjustable. The desk laptop arms easily tilt, swivel and rotate. Die-cast triple joint flexible arms can swivel 180°at each joint facilitating swing in and out of positions and extend up to 17" length. Mounting heads tilt (Up/Down) +/- 90°, swivel (In/Out) 180° and rotate (clockwise/counterclockwise) 360°..
  • Two Installtion Options - The desk laptop mount stand comes with C clamp and also grommet mounting kit. You can fix the l aatand and hold your monitor by using the C clamp or if there is a hole on your desk, you can choose the grommet mounting. The max thickness of the desk for C-clamp mounting is 4". The max thickness of the desk for grommet mounting is 3".
  • Ergonomic Laptop Desk Mount with Tray- This adjustable monitor laptop mount with table tray will provide optimal placement of the screen. Our monitor laptop stand allows you to work more comfortably, increasing your productivity by taking advantage of dual screens, which reduces the need to switch screens for dif....
Check Stock

WALI Laptop Holder Tray for 1 Notebook up to 17 inch Mount Compatible with VESA 100 mm 22 lbs Capacity with Vented Cooling Platform Stand MLP01

  • Compatibility: Compatible with WALI monitor mount e.g. M001LP, M00LP. Fits laptop up to 17”, 22 lbs. VESA 100x100mm..
  • Cool Design: Venting holes on laptop tray absorb cooling air from laptop fan. Tray measures 14 x 11.5 inches, with a 0.6 inch protruding bottom lip..
  • Double Benefit: Sleek modern design compliments any mount and desk while adding extra desk space for storage. Improve posture by mounting laptop to....
  • Edge Barrier: To securely keep the laptop in place and prevent the laptop from sliding and falling, even if tilted forward..
  • Package Includes: 1 x WALI Laptop Holder Tray(Black), 1 x Mounting Hardware Kit, experienced and friendly US based customer support available to....
Check Stock

Custom Built: A Sexy Romantic Suspense (Fast & Fury Book 1)

  • 【Bike Phone Mount with Shockproof Case】 - The iPhone XR bike mount comes with iPhone XR Shockproof case which intergrated quick locking mechansim to hold your phone wherever you mount it. Zero bulk and super-slim design allows you to use the case in everyday life without limitations (wireless charging supported)..
  • 【Extra Secure and Stable】 -The bike phone holder integrated ultra-lock system secures your device more stable. You can optionally switch on the Ultra-Lock. It offers more security through an additional locking of the case during extreme journeys..
  • 【Quick Lock & Easy Release】 - Mount the bicycle phone mount to handlebar easily. Quick to attach and detach iPhone case in 3 seconds with one hand. Make your phone safer and more convenient while riding..
  • 【Adjustable & 360° Rotatable 】 - The motorcycle / bicycle phone holder size is adjustable to fit handlebar sizes from Ø 0.59” (15mm)- 1.25” (32mm). Ideal for mountain, road, city, exercise, electric bicycles, jogging stroller, buggy. 360° rotatable phone mount allows you to freely adjust and secure your phone to any angle that suits your preference,.
  • 【Universal Adapters 】-The Bike Kit consists of 1x iPhone XR case + 1x bike mount+ 1 universal adapters(smartphone and ac....
Check Stock

Trimax TRZ6AL-RP Adjustable Hitch Aluminum 6

  • Kit Contains: (Part Number: TRZ6AL) Aluminum 6" Adjustable Drop Hitch w/Locking Ball Mount // (Part Number: SXT5) Key Receiver Lock // (Part Number:....
  • Aluminum 6" Adjustable Drop Hitch w/Locking Ball Mount Details: (Part Number: TRZ6AL) Includes: Dual 2" & 2-5/16" Chrome Balls & Receiver Lock // 2....
  • 100% Stainless Steel Key Receiver Lock Details: (Part Number: SXT5) Wide Span: 5/8" x 3-1/2" // Fits Class V Receiver Hitches // Made of Machine....
  • 2-1/2" to 2" Class V Receiver Hitch Adapter Sleeve Details: (Part Number: TAS25) Universal Fit // Use with any 2" Steel or Aluminum Ball Mount //....
Check Stock

VIVO Steel Universal Full Motion Pole Mount Laptop Holder Arm with Removable 75mm and 100mm VESA Plate, Fits 10 to 15.6 inch Laptops, Black, MOUNT-PL1A-LAP3

  • ERGONOMIC WORKSPACE - Our laptop mount can help alleviate neck and shoulder pain by easily adjusting the arm to your most comfortable position.  Having an ergonomic workspace will create healthy posture and improve your work efficiency.  Raising your laptop also creates additional desktop space..
  • UNIVERSAL COMPATIBILITY -  This universal laptop arm works with most laptops on the market. It supports the weight of your laptop or notebook up to 22lbs. The integrated cable management will keep your cables clean and organized. .
  • 360°  FULL MOTION ARM:  Adjustable laptop desk mount offers more movement and flexibility, with 85° tilt up and 90° down, 360° swivel, 360° rotation for most convenient placement of your laptop.  The 17.7" in pole height allows you to move the tray up and down the center to adjust to your eye level..
  • IMPROVED HEAT DISSIPATION - We designed the laptop tray to keep your laptop cool!  Multiple vent holes allow the computer fans to release the hot air from your laptop and protect it from overheating. The ventilated tray measures 14" wide x 11.8" deep and comes with a lip to securely hold your notebook in place. .
  • EASY INSTALLATION - All tools and hardware are provided for easy assembly.  The heavy-duty "C" clamp with i....
Check Stock

Trimax TRZ8AL-RP TRZ52 TAS25 Aluminum 8-Inch Adjustable Pin Clip Drop Hitch and Ball Mount Lock Pin Set Hitch Adapter Sleeve

  • Kit Contains: (Part Number: TRZ8AL-RP) Aluminum 8" Adjustable Drop Hitch w/Pin & Clip // (Part Number: TRZ52) Adjustable Hitch & Ball Mount Lock Pin Set // (Part Number: TAS25) Hitch Adapter Sleeve.
  • Aluminum 8" Adjustable Drop Hitch w/Pin & Clip Details: (Part Number: TRZ8AL-RP) Includes: Dual 2" & 2-5/16" Chrome Balls // 2 Receiver Hitch // Tow Rating: 10,000 Pounds // Tongue Weight Rating: 1,500 Pounds // Adjustable in 1" Increments // Usage: Drop/Rise Hitch // NOTE: Does Not Include Receiver Lock.
  • Adjustable Hitch & Ball Mount Keyed Alike Razor AL-RP Receiver Lock Pin Set: (Part Number: TRZ52) Includes: 1/2" Pin Ball Mount Lock with a 3-5/8" Span & 5/8" Pin Receiver Lock with a 3-1/2" Span // Made of High Quality Chrome Plated Machine Hardened Steel.
  • 2-1/2" to 2" Class V Receiver Hitch Adapter Sleeve Details: (Part Number: TAS25) Universal Fit // Use with any 2" Steel or Aluminum Ball Mount // Converts 2" Razor Adjustable Ball Mounts/Any 2" Ball Mount to a 2.5" Receiver // Made of High Quality Aluminum.
Check Stock

Dometic Baystar Hydraulic Steering Kit, HK4200A-3

  • Gives 5 wheel turns lock-to-lock when using BayStar outboard cylinders.
  • Kit Includes: (1) BayStar helm pump (HH4314-3) (1) BayStar cylinder (HC4645H) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438).
  • Also includes (1) BayStar tubing kit (HT4420H, 2 x 20' hoses).
  • Dn not use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.
Check Stock

KWODE Commercial Wall Mount Faucet Installation Kit, Wall Mount Kitchen Faucet Mount Kit Backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink

  • Commercial Faucet Installation Kit:This faucet installation kit connected size is G1/2 male(also called 1/2 IPS), not 1/2” NPT, fitting wall commerical faucets with G1/2 female end..
  • LEAK-PROOF DESIGN: It is one-piece construction for no leaking, plastic washers and rubber washers are used together for better leak-proof effect..
  • EASY TO INSTAL :Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of stainless steel sink by lock nuts to secure faucet.(tips please use the water tape to avoid leakage).
  • INSTALLATION KIT FOR BACKSLASH MOUNT FAUCET:This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of stainless steel commercial kitchen prep & utility sink, which can save you space and increase the service life of the water supply line..
  • SOLD IN PAIR: Comes with 90 degree angled elbow joint x 2, lock nut x 2, stainless steel washer x 2 and rubber washer x 2..
Check Stock

ChargeTech Anti-Theft Security Hardware Cable Lock Kit for Laptop, MacBook, iPad, Tablets - Device Locking Cable with Universal Compatibility for Computer Monitors, Laptops, Notebook Tablet, Phones

  • EXTRA STRENGTH STEEL CABLE - Extremely strong and durable steel cabled secures your device to most surfaces. Deterrent to cutting or breaking, this hardware lock kit will secure virtually anything. Keep your devices safe and secure while you are away. The product works with mobile phones, laptops, tablet and other devices. The cable's length allows for full maneuverability of the device while it is in use while keeping it secure. Product is extremely simple to implement and install..
  • 3M HIGH QUALITY ADHESIVE DISK - The Anti-Theft Security Hardware Cable Lock Kit has a industrial grade 3M Adhesive Disk that easily attach to most solid surfaces. Simpy remove the backing of the disk, place the adhesive pad on a solid surface and apply light pressure. The fast acting adhesive quickly forms a strong and long lasting seal with the solid surface. Adhesive disk attaches to most flat surfaces including steel, wood, composite, drywall and much more. Secure devices in any environment..
  • ASSORTED LOCK TYPES - Never lose your key or forget you locks combination again. The Anti-Theft Security Hardware Cable Lock Kit offers both a combination lock and traditional key lock option. The locks are constructed from industrial grade steel and that resists damage and is extr....
Check Stock

RAM Mounts No-Drill Laptop Mount for '19-21 Chevy Silverado + More RAM-VB-203-SW1 Compatible with 10\ to 16\ Wide Laptops

  • Compatibility: Fits one laptop or notebook up to 17” and supports weight up to 22lbs. Mount plates detachable and height adjustable compatible with VESA mounting holes 75x75mm and 100x100mm..
  • Multiple Options: The C-clamp is compatible with 0.4”-4” thick desk and Grommet is compatible with 0.4”-3” thick desk..
  • Multiple Adjustment: The high-grade arms extend, retract and easily adjustable on a 16” height pole, +/-15° tilt, +/-90° swivel and 360° rotate to change reading angles..
  • Cool Design: Venting holes on laptop tray absorb cooling air from laptop fan. Tray measure 14 x 11 inch (L x W), with a 0. 6” protruding bottom lip..
  • Package Includes: 1 x WALI Laptop Tray Desk Mount (Black), 1 x Mounting Hardware Kit, 1 x User Manual, experienced and friendly US based customer support available to assist 7 days a week..
Check Stock

Huepar 3D Cross Line Self-Leveling Laser Level 3 x 360 Green Beam Three-Plane Leveling and Alignment Laser Tool-Switchable Vertical & Horizontal Lines, Li-ion Battery&Portable Tool Bag included 503CG

  • ...oyed large capacity lithium battery (can be purchased easily at local market) for 6 hours use with all beams on. An extra battery is included for backup. Besides, this laser tool can be used at job site by plugged in when take out the battery. With Type-C charging port, the laser level can also be charged by phone, laptop, power bank, car charger, etc. Users can charge the battery independently with the battery charger included..
  • ✔️MULTIFUNCTIONAL LASER TOOL: The one 360° horizontal and two 360° vertical laser lines can be selected individually by separate H and V button on the keypad. With smart pendulum system, this laser tool self levels and indicates out-of-level condition while pendulum unlocked. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. The pulse mode extends laser range up to 200Ft. with Huepar Line Laser Receiver LR-6RG/LR-5RG in bright light or outdoor conditions..
  • ✔️MAGNETIC BRACKET & MOUNT THREADS: The included strong magnetic bracket enables to be attached to metal surfaces and turn the laser level around at 360°. The bracket offers ability to mount to any object up to 0.47" thick. The fine-tuning knob with lock on the bracket help adjust and lock the height within 3.74". The laser tool ....
Check Stock

Regalo Easy Step 49-Inch Extra Wide Baby Gate, Includes 4-Inch and 12-Inch Extension Kit, 4 Pack of Pressure Mount Kit and 4 Pack of Wall Mount Kit

  • SAFETY: Designed with safety-lock, meets all safety standard. Hardware mount for added security. Perfect for children 6-24 months. Great for PETS TOO!.
  • EXTRA WIDE: Expands to fit openings between 29-49 inches wide. Stands 30 inches tall.
  • EASY TO USE: Pressure mount design that is quick to set up. No tools required and is gentle on walls.
  • ADJUSTABLE: Includes a 4-inch and 12-inch wide extension kit, 4-pressure mount kit, and 4-wall mount kit. Perfect for doorway, hallway and bottom of stair use. Gate can quickly be removed out of the opening for easy storage.
  • DURABLE AND CONVENIENT: The all steel design is durable and convenient with a walk-through door.
Check Stock

VIVO Adjustable Clamp-On Desk and Wall Installation PC Mount, 3.0 USB Ports, Computer Case CPU Holder with Swivel Action and Secure Locking, Black, MOUNT-PC10BU

  • Compatibility: Fits Laptop/Notebook up to 17”, monitor up to 27” and supports weight up to 22lbs per arm. Mount plates detachable and height adjustable compatible with VESA mounting holes 75x75mm and 100x100mm..
  • Multiple Adjustment: The high-grade arms extend, retract and are easily adjustable on an extra tall 31.5” height pole, providing +/-90° tilt and swivel to change the reading angle, and 360° rotate from landscape to portrait mode. Laptop tray can tilt 15° only..
  • Double Benefits: Allowing use laptop and desktop at the same time without switching screens. The laptop tray with vented holes can prevent your device from overheating and keep it cool. Tray measure 14 x 11inch (L x W), with a 0.6” protruding bottom lip..
  • Installation Flexibility: The two-stage locking system is compatible with 4” C-clamp and 3” Grommet Base..
  • Package Includes: WALI Extra Tall Dual Monitor Desk Mount with Laptop Tray, Mounting Hardware Kit, User Manual..
Check Stock