Categories

Best Large Diameter Bearing

3007715/98001.175x25 Spline Gray

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Flight Diabolo Triple Bearing LED Light Up Professional Diabolo / Chinese Yoyo Toy with Aluminum Sticks Translucent Green

  • Flight Diabolo™ LED Light Up Chinese Yoyo. Long Spin Triple Bearing Design. Includes Net Carrying Bag. Includes Cushioned Carbon Sticks. Even includes 1 Extra 72 inch Diabolo String for when your first string wears out..
  • Includes Batteries (Replaceable use 1.5v LR44 or AG13). LED switch on each size. Two lights on each side. Medium / Large 4.7 inch diameter high performance Triple Bearing Professional Diabolo / Chinese yo-yo / skill toy. Perform all of your favorite Chinese Yoyo Diabolo tricks, throws, catches and cradles..
  • Includes 13.5 inch aluminum hand sticks with durable, comfortable foam handles for superior grip, and approximately 72 inches of string. Weight 9.5 oz. Diameter 4.7 inches. Width 5.6 inches. Perfect size for speed and handling..
  • Full length string can be shortened for smaller players. Triple bearing, one way axle for super long spin times and pro level diabolo play..
  • Stop searching and buy this diabolo today! Don’t be fooled by other cheap diabolos that are tiny and impossible to use!.
Check Stock

Witproton Ball Splines - Standard 8mmX300mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Spicer 5-460X U-Joint Kit 1310 to 1350 Series (OSR)

  • Spicer greaseable universal joint with snap rings.
  • Bearing Cap Diameter (1): 1.062 inches / Bearing Cap Diameter (2): 1.188 inches.
  • Bearing Cap to Bearing Cap (1): 3.219 inches / Bearing Cap to Bearing Cap (2): 3.625 inches.
  • Outside to outside dimension: 3.219 inch.
Check Stock

Witproton Ball Splines - Both Ends Tapped 8mmX270mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Witproton Ball Splines - One End Tapped 10mmX350mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Bearing Buddy Chrome Bearing Protectors (1.781\ Diameter) With Bras - Pair

  • To determine the correct size, measure the outside diameter of the dust cap or the inside diameter of the hub with calipers. If it measures 1.781" then this is the correct size for your bearing.
  • Measure the outside diameter of the dust cap or the inside diameter of your hub with calipers. If it measures 1.781" then this is the correct Bearing Buddy size for you. If not, refer to the sizing images to find the correct size.
  • For use with 1.781 inches (49.99 mm) hub bore, Outer Bearing Cup: LM-11949, Outer Bearing Cup (race): LM-11910,.
  • Please see measurement instructions (secondary picture) to confirm correct sizing.
Check Stock

CMTOOL Bearing Puller 3 Jaw Pilot Bearing Puller Blind Bearing Puller Set Bearing Pullers Bushing Gear Puller Small Inner Internal Bearing Puller Kit Car Motorcycle Wheel Pilot Bearing Removal Tool

  • ...small wrench is turned slightly, it will generate a large pulling force, which can be slip-resistant and firmly grasped, saving time and saving when using (claw length 80 mm).
  • 【Precautions】 The claws of the bearing puller have positive and negative installation methods. suitable all sleeve bearings with an inner diameter of 1/2 "-2". Note: Please keep balance when using it to avoid damage to the hook rod. If the bearing is rusty, it cannot be used (Stretching range: 50-95mm / 2.0-3.7 inches).
Check Stock

Nb Ball Spline Nut 13 mm Bore Dia x 36 mm L

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

U-Shape Type Swivel Flash Bracket for Umbrella Holder Light Stand DSLR Camera Speedlight

  • Supports umbrellas of shaft diameter less than 10mm, with independent locking screw.
  • The holder has two reserved interface at the top and bottom, and the interface is designed with mandrel hole which can be installed horizontally or vertically to such light stands and adapter screws of the diameter less than 15mm.
  • Using large handle of 70mm, clamp-type locking design, with the advantage of energy saving and large bearing capacity..
Check Stock

Witproton Ball Splines with Both Ends Stepped and Tapped 13mmX250mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

8MILELAKE 17Pcs Bearing Race Seal Driver Disc Tool Master Set Wheel Axle Bushing Installation Kit

  • 【APPLICABLE】This kit makes it easy to insert wheel bearing races and seals without damage to the race and axle housing. Also useful for driving small bushes.Suitable for cars, motorbikes or others that have bearings or seals..
  • 【MATERIAL】Aluminum construction for strength and durability as well as rust resisting..
  • 【INCLUDING】 3 sizes of drivers/handles: small (4-1/2" long x 7/16" diameter), medium (5-1/2" long x 5/8" diameter) , and large (6-1/4" long x 7/8" diameter), with knurled surface finish for extra grip when using. 14 Adapters (Small end diameter x Large end diameter) 10x12mm, 12x14mm, 14x16mm, 15x17mm, 16x18mm, 18x20mm, 20x22mm, 22x24mm, 25x27mm, 28x30mm, 30x34mm, 32x36mm, 35x40mm, 38x42mm..
  • 【EASY STORAGE】Comes with a blow molded case for safe & easy transport and storage..
  • Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement..
Check Stock

SKF NU 1010 ML - Cylindrical Roller Bearing - Straight Bore, 50 mm ID, 80 mm OD, 16 mm Width, C0 Internal Clearance

  • Bearing steel long life bearing, smooth, low noise..
  • Single row cylindrical roller bearings , please add lubricating oil or grease when using,Straight bore for fitting on a conventional cylindrical shaft.
  • N206M NU206M NJ206M NF206M NUP206M (inner diameter = 30 mm, outer diameter = 62 mm, thickness = 16 mm)..
  • Notice Notice Notice: Because RN206 has no bearing outer ring, so its outer diameter is not 62mm..
  • Notice Notice Notice: Because RNU206 has no bearing inner ring, so its inner diameter is not 30mm..
Check Stock