Categories

Best Large Head Countersunk Rivets

uxcell 50Pcs Black M3 X 10mm Alloy Steel Hex Socket Flat Head Countersunk Screws Bolts

  • Package Content: 50(+/-2%)pcs x Hex Socket Flat Head Countersunk Screws.
  • Thread Size(d*L): M3x10mm/0.12"x0.39"(D*L).
  • Product Name: Hex Socket Flat Head Countersunk Screws.
Check Stock

uxcell M3 x 10mm Metric Hex Socket Countersunk Flat Head Screw Bolts 100PCS

  • Package Content: 100(+/-2%) x Countersunk Bolts.
Check Stock

ISPINNER 100pcs 6 Sizes Aluminum Blind Rivets, Pop Rivets Assortment Kit 3/16\ x (5/16\ 3/8\ 1/2\ 5/8\ 3/4\ 1\)(Silver)

  • Material: These large bolt dropper rivets are made from high quality 100% aluminum alloy which is one of the highest forms corrosion resistance, making it longer last, sturdy, light, durable, easy and convenient to use. The highest quality will support all of your projects..
  • Head Size: Head diameter 3/16" (4.8mm), Length: 1" (25mm). Large Flange OD: 5/8" (16mm), Grip Range: Diameter 3/16"(4.8mm), Length: 11/16"-3/4"(17.4-19mm)..
  • Fitted Tools: The flange blind rivets assortment perfect fitted with automatic riveting machine, rivet bucket, and rivet gun..
  • Easy to use: The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. Using a rivet gun, the centerpiece (mandrel) is pulled up and creates a bulge at the bottom permanently locking and securing the material..
  • Applications: The aluminum open end pop long rivets are very strong and are great be used in a variety of environments including salt water, freshwater, indoor and out,and widely suitable for joining plastics, rubber, wood, grip and laminates, is used in assembly of caravans, trailers, furniture, plastic-framed window body..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

Keadic 75Pcs 3 Sizes 3/16 Black Aluminum Blind Rivets Assortment Kit Includes 1/8 x 9/32 3/8 7/16 1/2 Open End Domed Head Pop Rivets for Joining Metal Plate Pipe

  • 【3 Popular Sizes Pop Rivet Set】The large flange blind rivets kit contains 25pcs 3/16” x 5/8” (4.8x16mm) pop rivets, 25pcs 3/16" x 4/5" (4.8x20mm) pop rivets, 25pcs 3/16" x 1" (4.8x25mm) pop rivets, totally 75 pcs. All are packed by sizes in a sturdy storage container for convenient storage. Pls refer to the picture for more size detail..
  • 【Premium Aluminum Material】 Blind pop rivets have high-quality aluminum body and steel mandrel for corrosion and rust resistance. It does not deform surfaces after the riveting process is finished. Smooth and burr-free surface can be well matched with the rivet gun..
  • 【Provide A Strong Grip】The heavy duty material and thick shaft design offers a strong grip, prevent stripping effectively and a lasting connection without corrosion or popping. The large flange design can increase the connection area with the plat to expand force-bearing area and stable holding..
  • 【Easy to Use】 Simply drill a suitable hole and insert the blind rivet head into it and use rivet gun to pull the mandrel through. Then, you can lock the rivet in place and get a strong fastening..
  • 【Multipurpose Fastener】Our aluminum large flange rivet is corrosion and rust resistant so that they are works great on indoor and outdoor. Ideal fo....
Check Stock

100#8 Countersunk Finish Washer Black Zinc Plated Brass

  • Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
  • Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
  • Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
  • Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
  • Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools Premium Metric H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 509S-007M

  • High Speed Steel. Straight Shank. Metric Set(7 Pcs/Set): M3, M4, M5, M6, M8, M10, & M12.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

iexcell 250 Pcs Metric M3 x 6/8/10/12/16 Alloy Steel 10.9 Grade Hex Socket Flat Head Cap Screws Bolts Kit, Black Oxide Finish

  • 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Head Diameter: 5.94mm/0.23",Thread Size(Dia.): 3mm.
  • Total Length(Include Head): 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 16mm/0.47".
  • Screw Head Style: Flat Head (Known as Countersunk Head).
  • Screw Drive Style: Hex Socket ( Known as Internal Hex ), Hex Size 2 mm.
  • Package: Total 250 Pcs Hex Socket Flat Head Cap Screws, 50Pcs Per Size, Come in an Easy-use Separated Girds Plastic Storage BoxDescription Machine Screws, 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Easy to Store :These Screws Come in an Easy-use Separated Girds Storage Box.
  • ---Item------------Thread Length-------Total Length.
  • M3 x 6--------------4mm-------------------6mm.
  • M3 x 8--------------6mm-------------------8mm.
  • M3 x 10-------------8mm------------------10mm.
  • M3 x 12-------------10mm-----------------12mm.
  • M3 x 16-------------14mm-----------------16mm.
Check Stock