Categories

Best Large Output

CFYP Variable Speed Electric Blacksmith Forge Blower 30W-100W | Centrifugal Electric Air Blower with Governor | for Camping/Picnic/Outdoor Acativities BBQ Blower Fan-220V

  • Variable speed control saves more charcoal. The method of adjusting the wind speed-manually open the wind hood. You can also adjust the wind power through the governor,Meet your requirements for wind speed..
  • The blower is hand-built from pure iron, strong and sturdy,It can adapt to various harsh environments and will not malfunction after long-term use..
  • Pure copper wire motor, with large air volume, low noise and strong wind, can provide you with stable and strong airflow..
  • 30W blower air output 0.5m³ / min, 40W blower air output 0.8m³ / min, 60W blower air output 1m³ / min, 80W blower air output 1.1m³ / min,100W blower air output 1.3m³ / min..
  • 30/40W are suitable for household use, and 60/80W suitable for barbecue. It is recommended to use a large fan above 100W for industrial stove forging.Lightweight and easy to carry..
Check Stock

2000W Mining Power Supply Support 8 GPUs GPU Mining Rig, ETH Miner, Active PFC, PC 2000W Mining Power Supply PSU for 8 GPU ETH Rig Ethereum Miner Designed 110V-220V

  • UNIQUE DESIGN – This mining power supply can be a perfect tool for your Cryptocurrency mining rig. DC circuit design, with stable voltage output..
  • STABLE AND EFFICIENT – Cooling Fan and Auto Fan Speed Control.140MM Large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
  • ENERGY SAVING – The power supply rated output power 1800W, With up to 93% conversion efficiency, high efficiency and energy saving, Using a new large-capacity large magnetic ring material, the performance is very stable, Widely used in variety of mines and high-power single 12V industrial equipment..
  • It’s better for Bitcoin GPU mining, Support Up to 8 GPU(GPU is not included).
  • NOTICE – This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 2300 RPM, so the noise is normal, Using a new large-capacity large magnetic ring material, the performance is very stable..
Check Stock

Diymore 2pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module 20v to 12v Step Down

  • This step-down voltage module with a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current..
  • It is designed with 75V/80A large current dual MOS tube. Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output..
  • The efficiency can be up to 96%, measured at 20A, converting 24V to 12V. Wiring is convenient with these large current 30A screw terminals..
  • The buck module has 2 heat sink that could enhance heat dissipation, extending service life..
  • When there is a big difference between input and output voltage, please decrease power and current..
Check Stock

Schlage Electronics PS902-2RS Class 2 Power Supply with 2 Relay Output Board

  • Ultra High Output Power:All-copper high-frequency transformer, large output power, can meet one access control controller, 2 electric plug locks or 2 280 kg magnetic locks work at the same time..
  • Quality Material:This access control has an aluminum alloy casing that is rugged, shielded and resistant to interference. The rear of the power supply has a lifting hole that can be placed on the antenna board or hung on the wall..
  • Good Heat Dissipation:This access control power supply has cooling holes, and the side is also equipped with cooling holes, which hae excellent heat dissipation performance, but also fireproof, long serice life and low price. You will not regret it when you buy it back!.
  • high leel, low leel, switching quantity control three ways. Circuit protection: oercurrent, oeroltage, short circuit protection.
  • Buy With Total Confidence:We proide 1 month free return and exchange serice. If you find any quality problems during this period, except for man-made damage, you can contact us and we will gie you one within 24 hours.....
Check Stock

That Night at Strobe Studios

  • Outstanding output stability,150W Modeling Lamp Adjusts in 5% to 100% Power Level, No More than 2% Shifts When Under the Same Output..
  • Built-in Godox 2.4G wireless X system with outstanding functions.enabling synchronization with cameras having a one-preflash firing system..
  • Precise Output Displayed on LCD Panel, 40 Steps from 1/16-1/1. Adjusted parameters intelligently remembered after 3s and automatically recovered after a restart..
  • Compact and lightweight body with Bowens mount to add almost any studio light shapers.Excellent Heat Dissipation,Built-in Cooling Fan to Better Protect the Flash Tube, and Extend the Service Life Effectively..
  • Standard Large High-Quality Capacitors Provide Super Power, Stable Voltage and Precise Output, Which Makes the Flash Charge Faster and Last Longer..
Check Stock

LoadHandler Truck Bed Unloader - LH3000 - Fits Full Size Trucks

  • Very small size, length, width and height are 17*11*3.6mm.
  • The maximum output current can reach 1.8A, when the output current is 1.5A, the output voltage is 3V.
  • Switching frequency: 1.5 MHz (highest), typically 1 MHz.
  • When using this module with an inductive load, please pay attention to the protection of the current in the rear stage. For example, when using a steering gear or a motor, a large ripple may be generated, which may affect the chips in the rear stage circuit. You can add Zener and capacitor for protection.
Check Stock

Portico II Master Buss Converter

  • [EASY ADJUSTMENT] PT2399 + NE5532 continuously adjustable reverb and volume, with high performance and low noise..
  • [OUTPUT INTERFACE] With 2 microphone outputs, mixed output and music signal output, with less interference..
  • [EXCELLENT PCB] Using 1.6mm thick double sided PCB, spray tin process, ensure the good passage of large and small currents..
  • [APPLICABLE DEVICE] Support mobile coils and computer electret microphones and most wireless microphones..
  • [WIDE VOLTAGE RANGE] With DC12‑24V wide voltage range, suitable for more audio equipment, has strong practicability..
Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

  • Analog Current Meter Module. Transformer can only sense AC.
  • This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
  • 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
  • You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
  • On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.
Check Stock

Video Wall Controller 2X2, Video Wall,JCHICI TV Wall Processor,4K x 2K HD Display,180 Degree Rotate,8 Splicing Modes 2x2,1x2,1x3,1x4,2x1,3x1,4x1,Input 4K and Output 1080P, Streaming Media Video Device

  • ...Eye-catching video walls 】HDMI video processor allows you to create a gorgeous large-scale video walls and digital signage displays via LCD splicing screens.HDMI signal interface with audio decoding, audio and video perfect synchronization, so stunning!.
  • 【1 Input and 4 output】Display input [email protected] ,output [email protected] Be ompatibled with laptop,computer, set-top box, DVD player etc. Supports one [email protected] signal input and four [email protected] signal outputs, with a total output resolution of 4K..
  • 【Plug and play,180° Rotation】No need any app,quick and easy set up.Support 180°screen rotation function,the output device requires no more than 1080p @ 60 Hz..
  • 【8 Display Modes】Support 2x2, 1x1, 1x2, 1x3, 1x4, 2x1, 3x1, 4x1 modes for your choice. Can control it fastly via remote control or push button directly. Ideal for television broadcasting,video conferencing, security monitoring and other indoor and outdoor large screen splicing display..
  • 【Specification】 ◆HDMI input: 3840x2160P 24/30/50/60Hz and below input. Suppor....
Check Stock

TalentCell Rechargeable 12V Lithium Iron Phosphate (LiFePO4) Battery Pack (12AH LiFePO4 Battery)

  • Output Voltage: 9V-14.6V. The output voltage is output directly from 4S Li-Ion battery by through the PCM, so the output voltage is not constant..
  • Appearance shape、size of the product is similar to the specifications of traditional lead-acid batteries, so you can be installed directly instead of the customary lead-acid battery..
  • Lithium battery have excellent characteristics, for example: large capacity, small volume, light weight, etc. It will bring a very convenient experience to users..
Check Stock

TalentCell Rechargeable 12V Lithium Iron Phosphate (LiFePO4) Battery Pack (24AH LiFePO4 Battery)

  • Output Voltage: 9V-14.6V. The output voltage is output directly from 4S Li-Ion battery by through the PCM, so the output voltage is not constant..
  • Appearance shape、size of the product is similar to the specifications of traditional lead-acid batteries, so you can be installed directly instead of the customary lead-acid battery..
  • Lithium battery have excellent characteristics, for example: large capacity, small volume, light weight, etc. It will bring a very convenient experience to users..
Check Stock

BLACK+DECKER 12V DC Multipurpose Inflator (BDINF12C)

  • HIGH-VOLUME OUTPUT – For quickly inflating large items like rafts and air mattresses..
  • HIGH-PRESSURE OUTPUT – Ideal for inflating sports balls, vehicle tires, and bike tires..
  • DEFLATE FUNCTION – Rapidly empties air for fast cleanup and pack-up..
  • DIGITAL GAUGE – Shows current pressure and allows you to set target pressure..
  • AUTOMATIC SHUTOFF – Stops the unit once desired pressure is achieved..
  • 12V DC POWER – Plugs into your vehicle’s lighter socket for on-the-go inflation..
  • INCLUDES – (1) BDINF12 inflator, (1) ball needle, (1) Presta valve adapter, (1) small inflatable adapter, (1) large volume hose..
Check Stock

1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power

  • ★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
  • ★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
  • output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
  • ★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
  • with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
  • ★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
  • ★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.
Check Stock