Categories

Best Laser Cutting Acrylic

WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather

  • 【Faster Speed & High Accuracy】 Upgraded 20-24W Laser module and 32 bit motherboard support faster cutting and engraving speed. Ultra-fine laser focus is reduced to 0.06 x 0.06mm, provide you a higher accuracy engraving artwork. WIZMAKER laser engraver can cut 10-12mm paulownia wood and 8-10mm acrylic in one pass, and up to 20mm wood, 15mm acrylic, 0.05mm metal steel. Also can directly engrave metal, ceramics, glass, the engraving and cutting speed is 40% higher than the ordinary model..
  • 【Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
  • 【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protectin....
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

SCULPFUN S10 Laser Module with Air Assist Nozzle, 10W Optical Power, 20mm Wood 15mm Acrylic Cutting, Faster & Stronger Laser Cutter, Ultra-Fine Compressed Spot, Compatible with Laser Engraving Machine

  • ...le is different because it has an advanced hydrodynamic design that allows for better utilize of air pressure. S10 has a faster jet stream when using the same air assist. For example, when using a 30L/min, 0.03Mpa air assist, the S10 nozzle will eject a high speed airflow of up to 14.5m/s. This will greatly improve cutting penetration and cutting efficiency. (AIR ASSIST NOT INCLUDED, NEED TO BUY SEPARATELY).
  • Faster, Stronger and Cleaner: Combining advanced high-speed air assist and 10W high energy density laser, S10 embodies wood cutting performance comparable to industrial grade: First, cutting efficiency is greatly improved, cutting faster.
  • Second, cutting penetration is stronger, which can cut many high-density wood.
  • Third, cutting surface is cleaner, powerful airflow blows away the residue, leaving the surface of cut objects without any stain..
  • 0.06mm Ultra-Fine Compressed Spot: S10 adopts ultra-fine high energy 10W laser beam shaping technology, 0.06*0.06mm compressed spot enables finer laser engraving. S10 can cut 10mm wood, 5mm acrylic at one pass.
  • Cut 10mm walnut and 6mm MDF and other high density materials.
  • Carving metal, glass, stone, etc. Which means S10 has higher energy density, stronger cutting penetration and engraving capabilities..
Check Stock

Superior Graphic Supplies PETG Clear Plexiglass Plastic Sheet (48”W x 96”L) 20mil(.020"/.051MM) Thickness Plexiglass, DIY, Display Projects and Crafts

  • ...o offer protection, while still fitting perfectly between the photo and frame.
  • : These PETG, Acrylic, Perspex, Plexiglass sheets offer enough stiffness and flexibility for various crafting projects. Works well for stencils, window plastic, shaker cards, etc. Works with die-cutting machines. If making stencils or cuts, make sure your machine material is set to plastic packaging and adjust the pressure to more.
  • - : These PETG, Acrylic, Perspex, Plexiglass sheets have no melting point, cutting plastic through our thick clear plastics acrylic boards with a laser, table saw, jigsaw, drill, router, or bandsaw is quick and easy. The cell cast version offers clean cut edges without burrs, sharper laser engraving, higher resistance to scratch, and chemical solvents.
Check Stock

Superior Graphic Supplies PETG Clear Plexiglass Plastic Sheet (48”W x 48”L) 20mil(.020"/.51MM) Thickness Plexiglass, DIY, Display Projects and Crafts

  • ... offer protection, while still fitting perfectly between the photo and frame.
  • : These PETG, Acrylic, Perspex, Plexiglass sheets offer enough stiffness and flexibility for various crafting projects. Works great for stencils, window plastic, shaker cards, etc. Works with die-cutting machines. If making stencils or cuts, make sure your machine material is set to plastic packaging and adjust the pressure to more.
  • - : These PETG, Acrylic, Perspex, Plexiglass sheets have no melting point, cutting plastic through our thick clear plastics acrylic boards with a laser, table saw, jigsaw, drill, router, or bandsaw is quick and easy. The cell cast version offers clean cut edges without burrs, sharper laser engraving, higher resistance to scratch, and chemical solvents.
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Engraving Cutting Machine, High Energy Laser Cutter for 15mm Wood, 0.06mm Ultra-Fine Fixed-Focus Compressed Spot, Expandable Area

  • High Energy Cutting & Ultra-Fine Laser Beam – S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp compressed laser focus spot and 0.01mm engraving accuracy. With super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, 10mm plywood, engraving ceramics and stainless steel..
  • Safety Protection Design – Laser filter cover can filter 98% of UV light to protect your eyes, no need to wear goggles to watch laser engraving and prevent pets from catching the laser spot. Equipped with a power switch to easily turn on, or turn off the machine in case of emergency. A4 size steel pad protects the table from laser damage and isolates fire hazards..
  • Extensive Compatibility & Uses – Compatible various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Engraving materials: wood, paper, cardboard, plastic, PCB board, aluminum oxide, stainless steel, ceramic, stone, etc. Cutting material: wood, acrylic, plywood, fabric, bamboo, plastic board, etc..
  • Expandable Engraving Area & Quality Assura....
Check Stock

Superior Graphic Supplies PETG Clear Plexiglass Plastic Sheets 48 x 96 inches - 40mil (.040"/1.02MM) Thickness for DIY, Display Projects and Crafts

  • ...s, prints, and artwork! It’s the perfect thickness to offer protection, while still fitting perfectly between the photo and frame.
  • : Enough stiffness and flexibility for various crafting projects. Works well for stencils, window plastic, shaker cards, etc. Works with die-cutting machines. If making stencils or cuts, make sure your machine material is set to plastic packaging and adjust the pressure to more.
  • - : These PETG, Acrylic, Perspex, Plexiglass sheets have no melting point, cutting plastic through our thick clear plastics acrylic boards with a laser, table saw, jigsaw, drill, router, or bandsaw is quick and easy. The cell cast version offers clean cut edges without burrs, sharper laser engraving, higher resistance to scratch, and chemical solvents.
Check Stock

Langaelex 10 Pieces 5’’ x 7’’ x 0.043’’ (Actual Thickness 1.0mm -1.2mm) Acrylic Sheets Clear Extruded Plexiglass for Picture Frame Glass Replacement, Projects Display, Painting (5 inch x 7 inch)

  • NOTE: Supplied with protective films on both sides to prevent from scratching. Please remove the protective films before use..
  • PACKAGE CONTAIN: 10 pcs Acrylic Sheets (177.8mm x 127mm, 1.0mm -1.2mm thick)..
  • WIDE APPLICATION AREA: These acrylic plexiglass sheets can be used for a range of DIY and professional projects, such as photo frame glass replacement, projects display, painting, teaching tools, and more..
  • EASY TO CUT: You can choose hot cutting (laser cutting) or cold cutting (saw cutting). Cutting through the acrylic with a laser, table saw, jigsaw, drill is quick and easy..
  • 100% SATISFACTION: If for any reason you are not satisfied with a product from us, please do not hesitate to contact us. We take full responsibility for the quality of our products and will do our best to efficiently and efficiently solve your problem within 24 hours!.
Check Stock

Last In Line (Deluxe Edition) (SHM-CD) (Paper Sleeve)

  • ...ahrenheit, tear and wear resistant, suitable for indoor and outdoor usage.
  • Much stronger than glass, the acrylic perspex sheet is clear and light.
  • Multipurpose: the cast acrylic sheets can be applied for a range of DIY and professional projects, such as laser engraving and cutting, poster frame, picture frame, handcrafts, display stands etc..
  • With so many options, you'll love this multipurpose acrylic sheet board.
  • Easy to Cut: the acrylic sign can be cut into many shapes according to your usage needs, you can also use it for laser engraving, which is easy to cut and operate. Note: to avoid breaking, it is recommended to use a low speed when cutting the sheets with table saws and jig saws.
  • Wide Range of Applications: the clear cast acrylic sheet can be widely applied, you can use it to DIY projects, such as light box, pet cage, display cases and other home decors, fully enjoy the happiness of DIY.
Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

Clear Acrylic Sheet 1/8 Thick 24x36,3mm Plexiglass Sheet,Cast Acrylic Sheet(2 Pieces),Acrylic Plexiglass Sheet for Laser Cutting Signs Craft Display Holder Shelf Protector Window,Plastic Perspex Panel

  • Multipurpose:The acrylic sheet 24×36 is high quality and transparent,providing stronger durability than glass with weather resistance.The cast acrylic sheets can be used for a range of DIY and professional projects, such as laser engraving and cutting,making hobby，art,picture display cases,tabletop protectors,using in LED night lights,making a special top of your aquarium,greenhouse glazing,replacing a broken glass picture frame,broken windows or doors with suitable size of acrylic sheets..
  • More Use:The clear acrylic sheets have so many excellent features,they can instead of wood,glass,metal…The clear acrylic sheets can be laser engraved,seen-through,painted,written,cut.The plexiglass sheets can be used to be windows,doors,shelves,build an extension to a mini wall.Whether you are craftmen,workers,music,painting lovers,pets owners or for home decor,our acrylic plexiglass sheet will be a great choice for you.Please show your creativity and imagination with clear acylic sheets..
  • Modern Appearance and Strong Repairability:Our 24×36 Acrylic Plexiglass sheets are made from high quality acrylic material which is clear and light.Our Plexiglass has very high impact strength, light weight, weather and UV resistance, our plastic perspex panel offer superior....
Check Stock

xTool D1 Laser Engraver with Rotary & Material Box, 10W Higher Accuracy Laser Cutter, 60W Laser Cutting Machine, Laser Cutter and Engraver Machine, Laser Engraver for Wood and Metal, 17'' x 16''

  • You May Be Wondering - 10W is laser output power, which measures the capability of the machine to cut and 60W is the machine power of the laser machine.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images.
  • Wide Compatibility - xTool D1 supports LightBurn and xTool Creative Space software (Newly upgraded). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Turn Your Imagination Into Creativity - xTool D1 10W is suitable for more professional creators, like carpenters, craftsmen, artists, designers, practitioners of science and technology education and more.
  • All-in-One Kit - Rotary Attachment and Material Box are also provided, with which you can start your creation quickly with the xTool D1 laser engraver and cutting machine.
  • Eye Protection Design - The anti-UV filter acrylic on the laser mod....
Check Stock

3mm (1/8th Inch), 12x19 inch, Glowforge Ready, Special Pattern cast Acrylic, Craft Closet Brand | Maple Syrup Wood Grain

  • Premium quality- 1/8th inch thick (3mm) cast acrylic.  Excellent optical properties, light weight and stronger than glass, this premium cast acrylic is a superior product to use for trophies, signs, handicraft, laser cutting and an endless variety of other applications.
  • Masking- Both Sides are masked with a paper masking to prevent scratches and to provide durability during shipping and crafting.  This also prevents scorch marks during laser cutting..
  • Durable, versatile and multipurpose, perfect for all your acrylic needs. This cast acrylic can be used with Glowforge, Mira, Thunder, Trotec, Epilog, and other lasers, routers, Dremels and scroll saws.  It can also be glued, bent with heat, and drilled..
  • Available in single, 3-packs and variety 4 packs..
  • Craft Closet brand sells acrylics in solid, mirror, glitter, wood grain, marble and other specialty patterns..
Check Stock