Categories

Best Laser Machine Parts

LE400PRO Laser Engraver, 50W High Accuracy Laser Engraving Machine with 400x400mm Large Working Area, 5.5-6W Laser Power Engraver and Cutter for Wood, Metal, Acrylic, Leather

  • : LE400 Pro laser cutter and engraver adopts spot compression laser technology, and the laser focus spot is as fine as 0.08 x 0.08 mm, which makes the engraving and cutting effect very fine. The pre-assembled parts of the machine are carefully tuned to ensure the high precision of the laser's work..
  • : The laser engraver machine is equipped with a laser protective cover protects your eyes without wearing goggles when you are engraving wood and metal, filter UV light for 97%. The laser protective cover adopts a humanized magnetic design, which makes the assembly easier and more convenient..
  • : The focal length of the laser is a fixed value, no need to adjust the focus before engraving which traditional zoom lasers can not do! And the laser power of the fixed-focus laser is more stable. What's more, the design of using the knob to control the lifting of the device makes focusing more convenient and accurate..
  • : Full aluminum alloy modular can typically be assembled in 20 minutes. The structure makes the machine more solid, and improves the accuracy of engraving. Also equipped with a convenient power switch for easy po....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

Atomstack A5 M50 pro Laser Cutter and Engraver Machine by UESUIKA, 5-5.5W Optical Power, Diode 40w Laser Engraving Machine with Independent Control Terminal, Quadruple Lens Compression Fixed Focus

  • ... a free Laser Engraving and Cutting Materials】 Please click the "Promotion Available" button ,then click "Add both to Cart".
  • you will get a free Laser Engraving and Cutting Materials as you order Atomstack A5 M50 pro laser cutter.
  • 【Quadruple Lens Double Compression Spot】The A5 M50 pro laser cutter and engraver machine has quadruple lens compression Technology. 5-5.5W Optical Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products. It can not only engrave but also cut 0.8" of the wood and 0.6“ acrylic..
  • 【Support offline engraving】The A5 M50 pro 40W laser engraver is equipped with a terminal control panel, which supports offline engraving, so that you can engrave anywhere, anytime without the restriction of a computer..
  • 【Perfectly compatible system】A5 M50 pro laser engraving machine can be compatible with LaserGRBL or LightBurn. You can also use the Atomstack APP to control it on your phone..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire....
Check Stock

LUNYEE CNC Router Machine 3018-PLUS, 3 Axis 500W Desktop CNC Machine All Metal, Carving Milling Engraving Machine for Wood Acrylic Rubber Aluminum, XYZ Working Area 300x180mm

  • : Our 3018Pro CNC is an advanced carving, milling, and engraving machine at a very fair price. Assemble in less than 30 minutes out of the box. Designed for both new and experienced enthusiasts, this machine will grow with your job needs..
  • : Mainboard is GRBL v1.1, compatible with related design and control software. Software and assembly instructions are included. And we are happy to answer all support questions..
  • + +: Equipped with the upgrade clamp design, you can easily change the model between a CNC motor and a 40mm laser module according to your needs. You have two machines in one in a sense. Meanwhile, the machine is equipped with 6 limit switches and an emergency stop switch which provides safety for you and your creations..
  • , , : NO PLASTIC FRAME PARTS or SPINDLE MOUNT! The body frame is extra-thick aluminum alloy with countersunk rail bores. Drives are Leadscrew driven. The solid steel rails are 12mm thick with bearing slides, stable for precise work and heavy loads..
  • - : WE ARE THE MANUFACTURER, this is how we are able to offer you a low price for this beautiful hig....
Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

  • 【Powerful Laser Technology】: Comgrow Z1 laser cutter and engraving machine, with 10W diode laser module, 0.08 mm laser spot gives a precise cutting and engraving. Powerful laser units are available for cutting or etching plywood, some cloth and etching aluminum, stainless steel..
  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
Check Stock

FoxAlien Reizer 20W Desktop Laser Engraver Compressed Spot 32-bit Laser Engraving Cutter Machine for Wood MDF Ceramic Acrylic Metal 15.75x15.75 inches Large Work Area

  • 【0.08*0.12mm Laser Dot, 5W Optical Output】FoxAlien Reizer laser engraver equips with a 20W laser module (5W optical output). With the advanced....
  • Stable, Fast & Smooth】Reizer laser machine uses dual Y-axis motors. Two NEMA17 stepper motors ensure the machine run more stably....
  • 【Easy Assembly & Safety Protection】The machine is pre-assembly into several big parts. No complicated assembly of piece by piece. High quality....
  • 【Various Peripheral Products for Upgrade】15.75x15.75 inches (400x400mm) large engraving area meets daily DIY needs. Reizer is available for....
  • 【Wide Software Compatibility & Applications】FoxAlien Reizer is compatible with GRBL software, including Lightburn and Lasergrbl and supports file....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving

  • ...g & cutting speed is faster than ordinary compressed light spot is increased by 60%, it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing.
  • 【Extensive Software Compatibility】 LATITOOL F50 Max laser engraving machine is compatible with various mature engraving software on the market, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and the engraving file format supports JPG, PNG, DXF ,....
Check Stock

ORTUR 24V Laser Engraver 2 Pro-S2-LF Laser Machine 32-bit Laser Cutter Eye Protection Laser Master with 400x400mm 10000mm/min Laser Machine for Metal and Wood with Air Assist Nozzle

  • [Product advantage] Ortur Laser 1.8 firmware is optimized the motion algorithm and increases the maximum motion speed from 4000mm/min to 10000mm/mm,....
  • [Safety protection] Laser Master newly upgraded 5 Safety protection. 1. When the engraving machine is displaced or tilted, it will automatically stop....
  • [Accessories system update] 1. The laser engraving machine is equipped with the latest OLM-PRO-V10 motherboard, It could preprocess 32 instructions,....
  • [Sturdy and Easy Installation Structural Design] Pre-assembled parts, just need 10 - 20 minutes to install the laser machine. Aluminum profile frame +....
Check Stock

FoxAlien Reizer Mega 20W Desktop Laser Engraver, Compressed Spot 32-bit Laser Engraving Cutter Machine for Wood MDF Ceramic, Acrylic, Metal (31.5x15.75 inches Large Work Area)

  • ...le (5W optical output). With the advanced laser technology, the laser dot is only 0.08*0.12mm, which makes the laser more powerful and precise. It has great performance both in engraving and cutting. It can cleanly cut a 6mm thick plywood in a single pass..
  • Stable, Fast & Smooth】Reizer Mega laser machine uses dual Y-axis motors. Two NEMA17 stepper motors ensure the machine run more stably and precisely than those with single Y-motor. The motors are driven by a 32-bit control board. It is more stable, faster and quieter. Engraving speed can reach 20000mm/min. It can greatly improve the carving efficiency..
  • 【Easy Assembly & Safety Protection】The machine is pre-assembly into several big parts. No complicated assembly of piece by piece. High quality aluminum profiles make the laser cutter reliable and stable. Assembly can be completed within 10-20 mins. Protective shield on the laser module can filter 97% UV light and protect your eyes..
  • 【Various Peripheral Products for Upgrade】31.5x15.75 inches (800x400mm) super large engraving area meets daily DIY needs. Reizer Mega is available for upgrade to fulfill more engraving needs such as cylindrical objects engraving. Various peripheral products are available for Reizer laser cutt....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

  • ...ith super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing.
  • 【Extensive Software Compatibility】 LATITOOL F50 Max laser engraving machine is compatible with various mature engraving software on the market, such as LaserGRBL(Windows), LightBurn( Apple system), Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and the engraving file format ....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving Accuracy 0.01mm, Area(15.74\x16.14\)

  • First Choice for Creative: LATITOOL F50 laser engraving machine can engrave various materials like metal, wood, bamboo, plastic, leather PCB board, aluminum oxide, lacquered metal, etc. You can create your own engraved work for your favorites, realize your imagination..
  • Excellent Laser Engraving Technology: LATITOOL F50 laser cutter with 5~5.5w output power with 0.08mm ultra-fine compression laser focus area, the engraving accuracy reaches 0.01mm, which makes more refined engraving process, it makes easy cut on wood and acrylic..
  • 180° Panoramic Visible：UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks producing..
  • Solid & Easy Installation Structure Design: Industrial grade steel structure design makes the laser cutter and engraver machine more reliable and improves engraving accuracy. The entire engraver tool adopts a modular design, which is convenient for users to assemble, repair, replace and update laser engraving machine parts. And the assembly can generally be completed within 10-20 minutes..
  • Large carving Area: 400*410mm (15*16 inch) Large engraving range to meet various DIY....
Check Stock

Triumph Fiber Laser Marking Machine Raycus 30w for Permanent Metal Parts Engraver Marker Engraving Rotary jewllery Ring Firearms

  • Triumphlaser, professional manufacturer of laser machines,is serving more than 600 customers in USA now.We have USA stock and can ship you by local truck next day after you ordered,2-5 day to your door,all cost covered. You can engrave steel,stainless steel(and black marking),copper,aluminium,gold,silver,and some plastic like polymer for metal tools, machine parts, guns...Even you can cut thin material by multiple passes, pls check videos..
  • Computer and monitor included,software installed,it’s ready to work.The EZcad software is compatible with CORELDRAW, AUTOCAD, PHOTOSHOP format files.Support PLT, PCX, DXF, BMP, etc..
  • Advanced digital high speed scanning galvanometer,high speed,good stability.The standard engraving area is 110x110mm which performs the best results.Engraving depth is less than 1mm.And we also provided one spare lens 200x200mm for larger area.Other working size is optional..
  • With 80mm rotary attachment for cylinder engraving.If you are engraving small stuff like rings,pls inform us to send you ring engraving parts. We will also send free goggles for eye protection,foot switch,tools and other accessories.Voltage 110V 60HZ,power consumption is less than 1000w.It flexible you can work at your home,store,or any other places..
Check Stock

Atomstack A5 pro Laser Cutter and Engraver Machine by UESUIKA, 40w Diode Laser Engraving Machine, 5-5.5W Optical Power, Easy Assembly, Eye Protection Fixed Focus Compressed Spot

  • ...ckaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
  • 【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS and Linux). Engraving file format support: SVG, NC, DXF, BMP, JPG, PNG, etc..
  • 【Quality Assurance and After - Sale Service】We have a professional customer service team. We provide 30-day unreasonable return and 12-month free maintenance, replacement parts and technical support services. Your concerns are answered within 24 hours. We are so confident that you will love this laser engraver..
Check Stock