Categories

Best Laser Module Diode

5pcs 405nm Violet/Blue 5mW Laser Diode 5.6mm TO-18 LD for DIY Laser Module

  • 5mw Industrial class 532nm Green Laser Dot Module.
Check Stock

Creality 3D Printer Laser Engraver Module Ender 3 S1 Laser Engraving Kit 5W 24V 455nm Blue-Violet Light, Safety Cover, Fixed Focus, and Soot Absorption for Ender 3 S1, Ender 3 S1 Pro & Ender 3 S1 Plus

  • Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality. The 5W high-power engraving speed is faster, and the accuracy is higher..
  • Fixed Focus: Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. The unique convenient focusing unit can quickly and accurately fix the focus and make the best engraving effect..
  • Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve airflow, all of which contribute to fast and efficient heat dissipation, the built-in air filter cotton can absorb smoke and odor, allowing for prolonged service life..
  • Full Protection: Upgraded with a new safety cover that meets FDA Class 4 safety level requirements to prevent laser damage to eyes and skin..
  • Compatibility and Application: The laser module is compatible with Ender 3 S1, Ender 3 S1 Pro, and Ender 3 S1 Plus. It can be used to cut cardboard, wood, bamboo, rubber, leather, acrylic, plastic, etc..
Check Stock

Creality 3D Printer Laser Engraver Module Ender 3 Laser Engraving Attachment 1.6W 12V/24V 450nm Blue-Violet Light, Magnetic Design, with Goggles and Wood Pieces, Upgrade for Ender 3/5 Pro, CR-10

  • Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
  • Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size..
  • Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life..
  • Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed..
  • Compatibility and Application: The laser module is compatible with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo..
Check Stock

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

  • Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
  • This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
  • Aspherical glass lens provides tight Dot Laser in large temperature range..
  • Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • POWERFUL 10W DUAL LASER MODULE – The LASER TREE laser module has 80W machine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving ....
Check Stock

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock

405nm 445nm 450nm Laser Diode LD Driver Board 12V 2W Step-Down Constant Current Drive Circuit of TTL Modulation Power Supply

  • Direct Green Laser Diode for large temperature operation range. This module has integrated optic, laser diode, and APC driver circuit..
  • APC Driver Circuit enables the Laser output power safe and constant. Aspherical Glass lens provides tight Dot Laser in large temperature range..
  • Dimensions : Ø0.275" x 1.03" (Ø7 x 26.1 mm).
  • Wavelength : 505~530 nm. Laser output power : Class II - less than 1mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

Ucreate 3D Printer Laser Engraver Kit for Ender-3 S1/pro 24V 1.6W Engraving Laser Modules Simple Installation Safety Protection Precise Focusing Soot Absorption

  • Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
  • The laser engraving head kits enables to engrave metal, wood, acrylic, and others substances..
  • Compatible with Ender-3 S1/Ender-3 S1 Pro/CV-01 Carving Machine, can be adapted to various 3D printers, laser engraving machine, CNC engraving machine and other machines according to requirements..
Check Stock

Lights88 532nm Green Laser Module Diode Laser Beam Driver(5mw Green Dot Laser Module)

  • 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
  • Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
  • High Reliability Material: This dot diode module is made of durable copper shell for long life..
  • Continuous output: This dot diode module supports continuous output and can be used for a long time..
  • Application: This dot diode module is designed for engraving machine, cutter and so on..
Check Stock

DC 3-5V 405nm 100mW Mini Dot Diode Module Head Adjustable Focus Blue Violet Diode Module Micro Tube

  • 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
  • Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
  • High Reliability Material: This dot diode module is made of durable copper shell for long life..
  • Continuous output: This dot diode module supports continuous output and can be used for a long time..
  • Application: This dot diode module is designed for engraving machine, cutter and so on..
Check Stock

Quarton Economical 3D-Scanner Line Laser Module VLM-650-41 LPT30-D60 (Fan Angle : 60°)

  • This module has integrated quartz cylindrical lens, collimating lens, laser diode, and APC driver circuit..
  • APC circuit to provide maximum stable laser output power..
Check Stock

RLECS 10-Pack 3.3V 650nm Mini Small Red Laser Dot Diode Module 6mm Dia Copper Head 5mW

  • 40pcs Of Mini Laser Dot Diode Module Head WL Red 650nm 6mm 5V 5mW And 3V 5mW Each of 20Pcs.
  • This product is manufactured according to strict quality standards, and the products are of good quality..
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • ...U A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10, and also support m....
Check Stock