Categories

Best Latching Switches

5PCS 12mm Latching Push Button Switch 5A 12V DC Pushbutton Switch 1NO1NC SPST ON/OFF Switch Black Metal Shell with Blue LED Ring Light, Waterproof Self-Locking Pushbutton Switch for 1/2\ Mounting Hole

  • [Brand New Push Button Switch] Rating: 5A 12V DC.
  • Push it again, OFF. Contact Configuration: 1NO 1NC. IP65 waterproof protection can be used in wet or dusty environments..
  • [Ring Blue LED Light] Latching pushbutton switch use pole-less lamp beads. Bright and comfortable lights plus a metal appearance make the switch very cool. The work-life of the led light is more than 40,000 hours..
  • [EASY TO INSTALL] Round latching switch with screw clamp type terminals to make fitting very easy. There is a wiring instruction in Image 3. The switch and LED are separated, LED can be on all the time or only on when the switch is on, depending on how you wire it..
  • [WIDELY USE RANGE] You can use this push button switch to replace the light switch or other control switches in the cars/ boats/ trucks. It can also be used as a doorbell, entrance guard push button switch in the outdoors, or a replacement switch of household Appliances, such as table lamp switch, PC switch, Audio switch..
  • [SATISFACTION SERVICE] If you're not COMPLETELY SATISFIED with Linkstyle pushbutton switch, please feel free to contact us without hesitation, we provide a free return, a free replacement, or a full refund..
Check Stock

DaierTek 12V Latching Push Button Switch Marine Waterproof Round Blue LED Pushbutton Switch 19mm 12 Volt DC Ring Illuminated Metal ON Off with Label Sticker for Boat Car -6pcs

  • Specification: Latching push button switch 12v on off function with blue LED ring illuminated. Silver shell metal push button switch requires 19mm (about 3/4 inch) mounting hole size. Rating: 5A 12V DC.
  • Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances..
  • Wire Harness: The package of the led push button switch also contains becoming wire harness for the round 19mm push button switch, the clasp design of the wire harness make it easy to install and remove..
  • IP65 Waterproof: The 12 volt push button light switch is IP65 waterproof design, which produce the wide application range of the maintained push button switch. The 12v latching push button is suitable for marine, boat, automotive, car, etc..
  • What you get: 6 x waterproof push button switch, 6 x wiring harness, 1 x transparent label sticker, 1 x wiring diagram, 1 Year Warranty, 24h Fast Respond Customer Service..
Check Stock

315Mhz RF Switch Long Range DC 12V 4-Channel Wireless Remote Control Switch MELIFE 2 Transmitter & 1 Receiver for Garage Door Openers, Cars, LED Lights & More

  • ... product easy to use,strongly reliable and enduring..
  • LONG RANGE # Signal can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance. Max range is up to 328ft/100m with no obstacle..
  • EASY & FLEXIBLE # Two independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as one channel for garage door controller unit, the other for entry lights. Easy programming & easy to use DIP switches working mode selection between pulse / momentary, hold / toggle and latching mode..
  • ENCLOSURE # Designed to work both indoor and outdoor, default enclosure supplied protects the inner radio receiver circuit board safe from rain or other tough weather, while customer can also use chemical glue or epoxy adhesive to seal the wiring holes after setup, providing IP55 equivalent waterproof protection level..
  • APPLICATIONS # It is widely used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, wireless door alarm, wireless controller, etc..
Check Stock

Larcele 19mm 3 Position Rotary Selector Switch 2NO2NC with 12V Ring Indicator XZKG-01 (Blue Light)

  • Self lock rotary switch material: out shell is 304 stainless steel, rotary button is nickel plated brass..
  • Switch rating: 5A/250V AC. Led indicator light voltage: 12V..
  • Mounting hole: 19mm. Protection Grade: IP67, IK10..
  • 8 pin terminals, 2No2NC, 3 position 45 degree rotating..
  • Most often latching switches are used for various additional electric equipment, inside & outside the car(Such as critical lights, chassis lamp, fog lamps, dome light)..
Check Stock

RF Remote Control Reverse Polarity 12VDC Motor Control with Auxiliary Switch Input

  • ...y for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
  • 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver’s relay capacity is up to [email protected] and [email protected]..
  • 5. Wide Applications – The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting ....
Check Stock

penypeal Compact Sustain Pedal for Portable Keyboards,All Metal Heavy Design with Polarity Switch, for Portable Keyboards Digital Pianos Drum Machines

  • Portable sustain edal For digital iano,electronic keyboards, synthesizers, tone modules or drum machines with 1/4" TS lug sustain-edal inut./.
  • All Metal heavy design with olarity switch,better stability and durability./.
  • New design, which is more weighty.new anti-noise design,5-foot cable.
  • Ideal for alications that require non-latching momentary switches/.
  • One year warranty,find the seller: "Login Amazon" → "Your Account" → "Your orders" → "Ask Product Question", we are gonna give you an efficient and erfect solution. You are always the first for us./.
Check Stock

Taiss 2pcs Toggle Switch SPST 2 Position Latching ON/Off 6A AC 125V /10A DC 12V Toggle switches Incidental 5.2 inch Connect Wire Rocker Arm Switch KNS-1

  • Voltage & Current : AC 125V 6A/250V 3A, DC 12V 10A.
  • Main Body Size : 25 x 15mm / 0.98" x 0.6"(L*W).
Check Stock

RF Mini Wireless Remote Controller for Single Color 3528 5050 LED Strip Lights, Wireless Remote Control with DC Connector, RF Dimmer for 12V DC LED Ribbon, Shelf Lights

  • ...y for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
  • 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver’s relay capacity is up to [email protected] and [email protected]..
  • 5. Wide Applications – The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting ....
Check Stock

RAYANA Universal Stainless Steel LED Motorcycle Switch ON-Off Handlebar Adjustable Mount Waterproof Switches Button DC12V Fog Light (Color : A-red-Latching)

  • The function of each button color is not the same, pay attention to view the picture.
  • Metal: Aluminum alloy + rubber, Length: approx. 55cm, Waterproof, work well on rainy days.
  • Suitable Compatible with motorcycles and motorcycles ATV sports dirt electric bicycles Interrupteur Moto It can be used Compatible with headlight fog brake hazard lights and other available components..
  • Latching action (ON-OFF) button, can be use for general lights, hazard light, fog light, head light and power outlet for mobile devices.
  • Momentary action button, can be use as horn, turn signal, enginee power, start kill switches.
Check Stock

12V Relay Remote Switch Wireless RF Remote Control Switch 4 Channel Relay Module 433Mhz Transmitter Receiver Kit Universal Remote Controller for Lights Ceiling Fan Garage Door Opener Gate Car & More

  • ...y for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
  • 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver’s relay capacity is up to [email protected] and [email protected].
  • 5. Wide Applications – The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting l....
Check Stock

Sydien 1Pc 110V-220V 3A Latching/Self-Locking Push Button Switch with Wire Connector Socket Plug for 16mm /0.63\ Mounting Hole

  • ⭐Package Content: 1PC Push Button Switch & 1Pc Wire Connector Socket..
  • Push it again, OFF. Used in the 110V indicator will be darker..
  • ⭐Made of of durable metal with good conductivity. These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged underwater..
  • ⭐Great for electromagnetic starter, relay, Doorbell, Horn Button Switch, PC Power Switch or any circuit controls..
  • ⭐Can be use as a switch for various additional electric equipment, inside & outside the car, such as critical lights, chassis lamp, fog lamps, dome light. Widely used in various types of car or motor starting, power starting device, and also can be a access control button..
Check Stock

Schneider Electric Joystick Operator, 22Mm, 4 Dir, Momentary, XD4PA24

  • Price For: Each Contact Rating: 10A @ 600VAC Standards: UL, CSA NEMA Contact Rating Designation: R300 NEMA Rating: 4X, 13 Size: 22mm Item: Joystick Operator IP Rating: 66 Number of Directions: 4 Joystick Material: Chrome Bezel: Chromium Plated Metal Contact Form: 4NO Action: Momentary Direction of Operation: Vertical and Horizontal.
  • Latching / Non-Latching: Non-Latching Country of Origin (subject to change): France.
Check Stock

DaierTek Waterproof Latching Push Button Switch 12V 19mm ON Off Black Metal Pre-Wired 12 Volt Blue Led Light Illuminated for Marine RV -8 Pack

  • Specification: 19mm ON-OFF latching push button switch, black metal design with blue LED lights. Switch rating: 5A 12V DC. Mounting hole size required: 3/4 inches. Switch bezel diameter: 21.8mm..
  • Label Sticker: The 12v push button switch will come with label stickers, which contains 50 different symbols to help you easily and quickly find the pushbutton switch you want among switches with the same appearances..
  • LED Illuminated: Push button switch with 12V blue LED light illuminated, If you want to use it in an 120VAC environment, please connect a 150KΩ resistor in series to the LED pin..
  • IP65 Waterproof: This 19mm self-locking push button switch with high quality black aluminum material & IP65 waterproof protection can be used in wet or dusty environment..
  • Application: 12 volt metal push button switch can be applied to marine, rv, car, motorcycle, electric equipment, household appliance, machine, etc..
Check Stock