Categories

Best Lathe Blanks

DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks

  • LOCATE AND DRILL PEN BLANK CENTERS: The DCT Pen Blank Centering Vice – Pen Making Center Finder Tool for Marking Center When Drilling Wood Pen Blanks vertically holds and centers pen blanks up to 1.5 inches (3.8cm) square and makes center drilling of pen blanks a repeatable process that is easy.
  • NO MORE MARKING THE CENTER: Once clamped and centered under the chuck, it is quick and easy to drop in a blank and drill a centered hole.
  • You will appreciate not having to mark the center on each blank.
  • EASY SETUP: Unique support and threaded design that makes setting up the jig a simple one-time process.
  • There is no need to change the setup again to center and drill multiple pen blanks.
  • USE YOUR TOOLS: Use this vise with your existing drill press to drill a perfect center hole for the brass tube before putting the blank on a mandrel for turning on a lathe.
  • VARIOUS APPLICATIONS: Will hold both square and rectangular pen blanks up to 1.5 inches (3.8cm) square and can also be used for other applications such as wine stopper projects.
Check Stock

PSI Woodworking PKTRIM8 Pen Kit Barrel Trimmer 8mm Shaft with 3/4\ Steel Cutter Head & Allen Wrench

  • Includes 8mm Pilot Shaft, 3/4" Steel Cutter Head, and Allen Wrench.
  • Square the end of your pen blanks and pen tubes prior to turning on the lathe and pen kit assembly.
  • Shaft acts as a pilot for the cutting head and helps remove excess glue from the tube.
  • Shaft will fit into a drill chuck or lathe chuck.
  • Barrel trimming and squaring is an essential step in penturning projects to ensure a proper fit between the pen kit hardware parts and the turned blank.
Check Stock

Carter ACCURIGHT 89.5 X 1/4 X 4 TPI BANDSAW Blade

  • Attaches quickly and easily to most bandsaws.
  • Cuts perfect lathe blanks and circles up to 4+ feet diameter.
  • No drilling or external mounts necessary.
  • Easy to read radius measurements for precise circle size.
Check Stock

PSI Woodworking PKCPBAPAK 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (3) 30 Caliber Bolt Action Bullet Cartridge Ballpoint Pen Woodturning Project Kits. You will receive (1) of each in: Gun Metal (PKCP8020), Chrome (PKCP8010), and Gold (PKCP8000).
  • Also includes the bushing set (PKCP3000BU) needed to make the pens.
  • Features a 3/8" single tube design, our patented bolt action mechanism, and a Parker style ballpoint black refill. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/2"..
  • Patent No. : US D682, 352 S. Pen blanks are not included. The realistic bolt action handle smoothly advances and retracts to securely lock the refill in place. Each pen kit includes a bolt action rifle clip, a replica 30 caliber cartridge, and a rose gold bullet tip..
Check Stock

STAT Premium Clear Polished Duck Call Turning Kit

  • Create the wooden body of this kit yourself with your own lathe and wooden blanks (sold separately).
  • Polycarbonate construction provides durability and improved sound quality.
  • 1-1/2" x 1-1/2" x 4" recommended blank size, sold separately - Bore size 5/8" (.625").
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

Penn State Industries PKSP105A 7mm Pen Kit Bundle #1 Woodturning Project

  • This is a woodturning project kit. Pen hardware, selected bushing sets, and wood blanks only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. 7mm drill bit (PK-7MM), standard 7mm slimline bushings (PKM-BUSH3) and all other turning tools and supplies are not included..
  • Includes (8) 7mm Ballpoint Twist Pen Kits, (3) Compatible Bushing Sets, and (10) 5/8" x 5/8" x 5" Cocobolo Wood Blanks (WX01-1).
  • You will receive (1) of each of the following penturning kits: Premium Slimline in Gold (PK-PEN), Premium Slimline in Brushed Satin (PK-PENSAT), Premium Comfort in Gold (PKCFPEN), Premium Comfort in Brushed Satin (PKCFPENS), Designer in Gold (PKMONT224), Designer in Brushed Satin (PKMONT2S), Trimline in Gold (PKXM24), Trimline in Gun Metal (PKXMGM).
  • You will receive the following (3) Compatible Bushing Sets: PKCFBUSH, PKXMBU, and PKMONT2-BU.
  • Not included: Standard Slimline 7mm Bushing Set (PKM-BUSH3) needed for the Premium Slimline Kits or the 7mm drill bit (PK-7MM) needed to make all the kits.
Check Stock

JET JWL-1840EVS, 18" x 40" Wood Lathe, Variable Speed, 1Ph 230V (719600)

  • Hold long round stock 2 3/8” firmly and accurately for wider project use beyond just Duck calls, such as pepper mills..
  • Solid, extended grip design – the most popular 1 ½” round blanks are held firmly without vibration – drill and turn your projects accurately and cleanly..
  • Convenient. Do all of your operations on the lathe – no need for a drill press..
Check Stock

Woodturning Lathe Tools Project Woodturner T-Shirt

  • SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on the market. Easy to operate meaning turners of all levels can use it..
  • SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one at a time) with Stellite Cutters giving a combination of cuts that will remove bowls from 3" to 12" up to 5" deep from the inside of the mother bowl. Different shaped vessels can also be achieved..
  • LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has a different diameter tool post so you may need to order a tool post to suit the lathe you are using if not 1". Set it up and start saving wood..
  • PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove a perfect bowl every time. A template pattern to determine bowl depth is included, or purchas....
Check Stock

Penn State Industries PKPCUTA Standard Stainless Steel Pizza Cutter Kit Woodturning Project 5pack

  • This is a woodturning project kit. Hardware only. HANDLE NOT INCLUDED. A LATHE IS NEEDED TO 'TURN' INTO FINISHED pizza cutter. Blanks, 1/2" drill bit,....
  • Includes (5) PKPCUTA Standard Stainless Steel Pizza Cutter Woodturning Kits..
  • This is a Turn-Between-Centers project kit. Overall length will vary depending on your own custom handle design. Minimum blank size is 1-1/2" x 1-1/2"....
  • Features a 4" stainless steel cutting wheel, a thumb guard, and a ferrule style handle..
Check Stock

Penn State Industries PKLEVSSX Lever Action Click Ballpoint Pen Kit Starter Package Woodturning Project (With Metal Gunstock)

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes: (4) Lever Action Click Ballpoint Pen Kits With Metal Gunstock and (1) set of bushings.
  • Metal gunstocks are included with this starter package.
  • See Product Description below for more details..
Check Stock

Penn State Industries PKGRIND-4 Antique Style Copper Finish Peppermill Mechanism Woodturning Kit (1, Antique Copper)

  • This is a woodturning project kit. Hardware only. A lathe is needed to make into finished pens. Blanks and drill bits are not included..
  • Includes (1) PKGRIND-4 Antique Style Copper Finish Peppermill mechanism woodturning project kit.
  • Cast metal mechanism measures 4-1/2" high by 2" diameter.
  • Adjustable mechanism for choice of course to extra fine pepper grounds.
  • Requires (3) drill bit sizes: 5/16", 1" Forstner, and 1-3/4" Forstner. Minimum blank diameter is 2-3/4"..
Check Stock

Penn State Industries PKGRIND3 Small Copper Antique Style Coffee Grinder Mechanism Kit Woodworking Project

  • This is a woodworking project kit. Adjustable grinding mechanism, crank handle, and mounting hardware only. A lathe is needed to make into finished coffee grinder. Wood blanks, drill bit, and all other turning tools and accessories are not included..
  • Build a custom antique-style working coffee grinder using this antiqued copper mechanism.
  • Mechanism with wheel and knob measures 3" x 3" x 5".
  • Adjust the grind of the coffee with knob on top of grinder mechanism.
Check Stock

Penn State Industries PKMSPN Measuring Spoon Set Kit Woodturning Project (1pack)

  • These are woodturning project kits. A LATHE IS NEEDED TO 'TURN' INTO FINISHED A MEASURING SPOON SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSPN Woodturning Measuring Spoon Set Kit..
  • Each set includes measuring spoon sizes 1/4 tsp, 1/2 tsp, 1 tsp, and 1 Tbs..
  • Uses bushing set PKMSPBU. Requires 7mm drill bit (PK7-MM) and 5/8" x 5/8" x 3-1/2" minimum blank size..
  • Easy to make on a pen mandrel with 7mm tubes. Chrome ring included. The measurements are marked in the metal..
Check Stock