Performance Abrasives New Wave 2\ Scruff & Buff Ball 180 Grit Green

  • 2"-diameter New Wave design with 3-1/2" shaft.
  • Works in all drills, drill presses, and grinders.
  • Easy to clean with water or compressed air.
  • Fits most hand drills, lathe chucks, drill presses and more!.
Check Stock

INTBUYING WM180V Metal Lathe Machine Benchtop Lathe Machine 7''x12'' Mini Precision Lathe Brushless Motor 600W 2500RPM Variable Speed Mini Metal Lathe MT3 Spindle Taper Inch Thread Precision 110V

  • ...gth of center is 11.8"(300mm),Swing Over Bed is 7"(180mm),Rotary diameter of tool rest is 5.51"(140mm),Diameter of chuck is 3.94"(100mm),Spindle taper is MT3,Precision of the spindle is 0.01mm.❥Our metal lathe include 7 gears(30/48/50/52/60/66/70)..
  • 【High Precision Operation】❥High Precision Reverse three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly.❥Precise dials are provided on the saddle handle, the tail stock handle and the movable center, allowing for more accurate and professional work.❥With the MT2 taper in tailstock spindle, this lathe machine is capable of adjusting set screws for accurate operation..
  • 【Easy to operate】❥The rotation speed can be displayed on the digital screen,which is more convenient for accurate adjustment and operation.❥The adjustable 4-way tool post on the lathe allows you to easily change your cutting tools.❥Forward and reverse switch and with emergency stop switch In case of emergency can stop immediately..
  • 【Adjustable Rotation Speed】The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm. The panel can observe the rotation speed in real time, which is flexible and convenient..
Check Stock

Expanding Ring Mandrel-Ring Mandrel for Lathe,Ring Stretcher,Ring Sizes(7.5-10.5) Turning and Manufacturing Rings Making

  • Easy to Use: If You’re Making More Than one Size Ring,This Lathe Rotates Your Ring so That You Can Easily Change any Size, Helping You to Improve Your Work Efficiency..
  • Premium expansion ring mandrel is precision machined to keep your ring comfortable and turns on a lathe for much longer wear and light times than regular steel.
  • The 1/2 inch base is made of high quality stainless steel material and is suitable for a variety of chucks.
  • This mandrel fits 7.5 to 10.5 ring sizes, and each step on the mandrel is half size..
  • Please apply one or two layers of tape to the steps you will be using, each ring size has extra space to accommodate the tape, this helps protect the inside of your ring from being scratched, in order to guarantee proper function..
Check Stock

PSI Woodworking LA3418X Lathe Headstock Spindle Adapter 3/4\ x 16tpi to 1\ x 8tpi

  • Convert a 3/4" x 16tpi lathe headstock spindle to 1" x 8tpi.
  • Allows a 3/4" x 16tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories.
  • Flats allow for solid wrench tool grip for tightening and loosening.
Check Stock

Red Wing Lathes 26A 4-1/2 Base 4-1/2 Shaft 115V/110V Each

  • Model #26A: A full 1/4 HP, 1725/3450 RPM two-speed lathe for use on top of laboratory bench. Its 4 1/2” shaft height allows for easy use by the technician with hands resting on the tabletop..
  • Maintenance free standard dental, tapered shafts—each includes a right and left chuck remover for easy removal of standard dental chucks..
Check Stock

JET JWL-1840EVS, 18" x 40" Wood Lathe, Variable Speed, 1Ph 230V (719600)

  • Hold long round stock 2 3/8” firmly and accurately for wider project use beyond just Duck calls, such as pepper mills..
  • Solid, extended grip design – the most popular 1 ½” round blanks are held firmly without vibration – drill and turn your projects accurately and cleanly..
  • Convenient. Do all of your operations on the lathe – no need for a drill press..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • ...manual up and down movement function.Integrated cross worktable,width is widened,with high precision positioning adjustment scale,which can be moved from front to back,left and right.It is important to note that this lathe has only a metric scale..
  • 【With MT3-ER32 Collect Chucks】Mini Mill Grinding machine comes with a set of MT3-ER32 milling chucks,without additional purchase.The size:4-3/5-4/6-5/8-7/10-9/12-11/14-13/16-15.Different sizes of chucks will meet your needs..
  • 【Digital Readout】Variable Speed Mini Milling/Drilling Machine USES an integrated spindle and brass gear,which makes it not only precise but also durable.The rotating speed display and the drilling and millling depth display are all high-definition LCD screens, which are clearer and richer than the previous digital tube display and convenient to operate for all kinds of metal,wood,and other materials processing,widely used in machinery manufacturing,woodworking,DIY and so on..
Check Stock

PSI Woodworking LA11418 Lathe Headstock Spindle Adapter 1-1/4\ x 8tpi to 1\ x 8tpi

  • Convert a 1-1/4" x 8tpi lathe headstock spindle to 1" x 8tpi.
  • Allows a 1-1/4" x 8tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories.
  • Extends spindle length approximately 1-1/2".
  • Flats allow for solid wrench tool grip for tightening and loosening from spindle.
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for less spindle and changer maintenance..
  • Free Wrenches & Pull Studs: Three free wrenches for extra tightening and easy release if necessary. 10 free HAAS pull studs. Ideal for CNC Lathe/milling, drill press, and heavy duty hand tools..
Check Stock

Woodowl 04181 1/4″ x 18″ Bellhanger Installation Drill Bit HRC 59 Induction Hardened Steel (1/4″ x 18″)

  • Bellhanger bits are the bit of choice for installing all types of small wire systems including stereo, cable, computer, phone and security.
  • These bellhanger bits are precision milled and ground producing bits that are perfectly concentric with very little wobble. They will drill accurate diameter holes, require less energy to power through wood and produce less heat. They will also drill straight and true through all types of wood with minimal wandering..
  • The tip has a small hole that enables wire to be attached and pulled through long holes in walls, floors and ceilings.
  • Cutting heads are fully induction hardened to 58 HRC making them perfect for boring holes in wood, plaster, lathe and light masonry.
  • These bits feature quick release hex shanks for fast bit change-outs with secure gripping surfaces in drill chucks.
Check Stock

Nova TK-48246 Direct Thread 1 Inch Small Wood Turning Chuck Bundle Set with Automatic Jaw Safety Stop and Copper Impregnated Jaw Slides, Reversible

  • SAFE AND SECURE: Anti-release spindle lock (reversible).
  • Ensures chuck will stay securely mounted on the lathe during forward and reverse turning applications.
  • MINIMIZES LOAD: Small size (85-milimeter/3.35-inch) and weight minimizes load on small spindles and bearings.
  • FAST OPERATING ACTION: Ideal for production turning of smaller pieces.
  • ADVANCED FEATURES: Automatic jaw safety stop, copper impregnated jaw slides, and direct thread 1-inch x 8TPI dual thread.
  • SPECIFICATIONS: Up to 350-millimeter/14-inch diameter bowls (using 50-millimeter jaws).
  • Up to 150-millimeter/6-inch length spigots (using 50-millimeter jaws).
  • Takes the same accessory range as all other NOVA chucks.
Check Stock

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • 【Z011A 4-Jaw Chuck, FourJaw Mini Lathe Chuck】- 1. 4-jaw design, compact size, easy to use. The Mini lathe tools 4 Jaw Chuck has a large clamping range. Outer diameter about 12 mm-65 mm, Inner diameter: about 1.8mm-56mm..
  • 【Woodworking Accessories Self-centering 4 Jaw Lathe Chuck】- The self-centering lathe part contains a delicate oblique angle gear and pinion gears. They contribute to precise processing progress. Widely used for woodworking lathe..
  • 【Scope Applications of the Zinc Alloy Mini Lathe Chuck】- The 4 Jaw design Lathe Chuck is made of high quality zinc alloy material, wear-resistant, strong and durable. Mainly used for mini metal lathe. Since the changeover and setting time is cut, your lathe can work with higher efficiency..
  • 【Practical Lathe Accessories Self Centering Mini Chuck】- The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machin....
Check Stock

Adjustable Double Bearing Live Center Revolving Center DIY Parts for Mini Lathe Machine Woodworking Tool

  • Lathe Machine DIY Parts: Mini Lathe Machine Woodworking Tool is ideal for using in domestic lathe woodworking lathe miniature car tools and other tools.spur center for wood lathe.
  • High Quality: Mini Lathe Machine Woodworking Tool is made of mental material, good heat resistance, high mechanical strength and durable.mini lathe live center.
  • Adjustable: Holing depth can be regulated and adjustment.live center for wood lathe.
  • Easy To Use: High precision, high hardness, highly efficient.wood lathe.
  • Size: Compact, easy to operate. Tip height: 27mm(appr.), Tip stretchable length: 30mm(appr.), Size: (L) x (W) 10 x 4.3 cm / 3.94" x 1.69"(appr.)..
Check Stock