Best Lc Multi Mode

TP-LINK Gigabit SFP module, 1000Base-SX Multi-mode Fiber Mini GBIC Module, Plug and Play, LC/UPC interface, Up to 550/220m distance (TL-SM311LM)

• Multi-Mode MiniGBIC module, Supports full-duplex.
• Wave Length: 850nm. Data Rate: 1.25Gbps. Port Type: LC/UPC.
• Max. Cable Length: 550m(1,800 feet) using 50/125um Multi-Mode Fiber, 220m(720 feet) using 62.5/125um Multi-Mode Fiber.
• Always keep the protective dust plug on the SFP’s optical bores until you are ready to make a connection.
• Compatible with all SFP ports on TP-Link product including JetStream switches, and media converter MC220L.
• Work with MC200CM with multi-mode fiber connection.

LC to LC Fiber Patch Cable Single Mode Duplex - 3m (9.84ft) - 9/125um OS1 LSZH - Beyondtech PureOptics Cable Series

• Beyondtech high-quality LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
• This fiber OS1 LC LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
• This SM fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
• This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
• OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) – LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (1M, OM3-5Pack)

• Beyondtech Pre-terminated connectors on both ends LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
• This fiber OS1 LC LC 1 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
• This SM singlemode fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
• This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
• OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..

LC to LC Single Mode Insensitive Fiber Patch Cord - Duplex - 2M - UPC/UPC - 9/125um OS2 100G (5 Pack) / - Beyondtech PureOptics Cable Series

• Beyondtech high-quality and Insensitive LC to LC Fiber Grade: G.657.A2 Patch Cable Single mode 9/125 OS2 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
• This Beyondtech Fiber OS2 9/125 LC/LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
• This SM fiber has an yellow color jacket with a 3.0mm diameter. OS2 cables have a 0.36 dB/km attenuation at 1550 nm – 0.22 dB/km at 1310 nm.
• This LC to LC Single mode Duplex OS2 fiber patch cords operate at -40ºC to +75ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
• Reduced bend loss sensitivity versus standard telecom fiber patch cables: Optimal for Flexible Installations in indoor cable set-ups they could now be used in walls, ceilings, conduits (FTTH) and other bumpy surfaces without worrying about fiber bends..

uxcell 3dB FC Fiber Optic Attenuator, FC/UPC to FC/UPC Single Mode 9/125 Adapter

• Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
• [ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-15dB..
• [FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
• [SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
• [APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

LC to SC Fiber Patch Cable Multimode Duplex - 3m (9.84ft) - 50/125um OM2 (2 Pack) - Beyondtech PureOptics Cable Series

• Beyondtech high-quality LC to SC Fiber Patch Cable 50/125 OM2 Multimode fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, commercial, LAN, SAN, building backbone, riser and horizontal applications. It supports video, data and voice services..
• This Beyondtech Fiber OM2 50/125 LC/SC Fiber Patch Cord conforms with ITU-T G.651.1, TIA/EIA 492AAAB and IEC60793-2-10 A1a.1a standards and complies with RoHS specifications..
• This MM fiber has an orange color jacket with a 3.0mm diameter. OM2 cables have a 500 MHz-km bandwidth and a 2.3dB/km maximum attenuation at 850 nm light sources and a 500 MHz-km bandwidth and a 0.6dB/km maximum attenuation at a 1300 nm wavelength..
• This LC to SC Multi mode Duplex OM2 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
• OM2 patch cords are suitable for backbone, riser and horizontal configurations..

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

• Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C，Output Power: -8.2~-1dBm，Receiver Sensivity: -11.5dBm，Interface: LC.
• Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
• Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
• Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
• You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).

Fiber Optic Transmitters, Receivers, Transceivers PIN 10GBASE-LR, 10.3 Gb/s transponder10km

AddOn Sfp+ Module

• For Data Networking, Optical Network - 1 LC Fiber Channel Network - Optical Fiber Multi-mode - 32 Gigabit Ethernet - Fiber Channel, 32GBase-SW - Hot-swappable - TAA Compliant.

1G SFP SX for Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S Ubiquiti unifi UF-MM-1G Netgear AGM731F D-Link DEM-311GT ZTE SFP-GE-M500 Extreme MGBIC-LC01 1000BASE-SX SFP 850nm 550m DOM Transceiver Module…

• 【1000BASE-SX】SFP to LC Optical Gigabit Ethernet transceiver module 1.25Gbps SFP Mini -GBIC, Multi-mode 850nm LC duplex connector DDM 550m..
• 【1GB SFP】For Cisco 1.25 Gigabit Ethernet 1000BASE-SX standards (coding as Cisco LC-SX-MMD GLC-SX-MM SFP-GE-S ).
• 【1G SFP Module】SFP Transceivers Compatible Cicso meraki with Gigabit Ethrnet , up to 550m for MMF transmission, compatible with SFP Multi-Source Agreement and SFF-8472 digital diagnostics functions ,specified in IEEESFF-8472 MSA Compliant, IEEE 802.3ah-2004.
• 【 Easy to Use 】installation, plug and play, fully hot-pluggable. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with SFP ports..
• 【3 WARRANTY】30-Days Free-returned, 65-Days Free-replacement, 5-Years Free-maintenance,Fibermall supports regular custom service for your options..

SHARP LC-37D40U LOGIC BOARD CPWBX3333TPZY 3508

• LC fiber keystone insert is compatible with Single Mode OS2, 9 microns or Multimode OM1, OM2, OM3, OM4 and 50 microns or 62.5 microns fiber patch....
• LC fiber coupler joins two duplex multimode fiber patch cables with Low profile LC connectors.
• Protective caps on the adapter prevent dirt from....
• Duplex LC adapter with a flangeless design, phosphor bronze sleeve, and stainless steel retention clip accommodates zipcord fiber cables.
• Sturdy snap-in construction of LC fiber feed-thru coupler keystone provides a secure connection.
• Installation of female to female keystone insert....
• Cost-effective 5-pack provides spare keystone jack inserts for last minute cable connections.
• Re-usable keystone jack inserts with caps can be easily....

FiberCablesDirect - 0.5M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 0.5 Meter (1.64ft) | Length Options: 0.5M-300M | 1g 10g sfp+ 10gbase lc/lc dplx Yellow PVC ofnr lc-lc

• Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 0.5 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
• Fiber Patch Cable Details: 0.5 Meter (1.64 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
• Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflec....

FiberCablesDirect - 1M OS2 LC LC Fiber Patch Cable | Duplex 9/125 LC to LC Singlemode Jumper 1 Meter (3.28ft) | Length Options: 0.5M-300M | 1g 10g sfp 10gbase lc/lc dplx yellow zip-cord pvc ofnr lc-lc

• Fiber Cable Description: OS2 LC to LC Fiber Patch Cable 1 Meter | 10Gig Duplex Single Mode fiber optic cable, 9/125 Corning optical fiber, yellow, OFNR (riser rated), 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance, General Commercial, Computer Networking Applications..
• Fiber Patch Cable Details: 1 Meter (3.28 feet), duplex (2 fiber strands), 2.0mm outer diameter, zip-cord reinforced, LC to LC terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -55 dB), Singlemode Fiber (SMF) Optical Patch Cable / Jumper Cord..
• Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) ....