Categories

Best Lcd Display For Arduino

AITRIP 3PCS 2004 20x4 LCD Module IIC I2C Interface Adapter Blue Backlight Compatible with Arduino R3 Raspberry MEGA2560 (Blue)

  • LCD display module based on the popular HD44780 controller, works great with for Arduino / for Mega2560 board and other micro-controllers..
  • It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
Check Stock

Complete Ultimate STEM Electronic Projects Starter Kit for Arduino with Mega2560 LCD1602 Servo Stepper Motor Sensors Breadboard Jumper Wire Resistor Capacitor Transistor and Tutorial

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists..
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit...
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast.
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general.
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things.
Check Stock

ACEIRMC 4pcs HD44780 IIC I2C 1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino R3 Mega 2560

  • HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Blue Blacklight.
  • HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino.
Check Stock

HiLetgo 3.5\ TFT LCD Display ILI9486/ILI9488 480x320 36 Pins for Arduino Mega2560

  • 3.5" TFT LCD Display ILI9486/ILI9488 480x320 Suitable for MEGA2560.
  • Support Arduino Mega2560 Directly inserted.
  • OnBorad level conversion chip for 5V/3.3V MCU.
  • Compatible with 3.3/5V operation voltage level.
  • Compatible with Arduino-Series development Board. (Please notice:This Screen is not touch screen).
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

BIQU LCD 12864 Version Graphic Smart Display Controller Module with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

3D Printer Controller Kit RepRap RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

LCD Module 2004A 5v IIC I2C LCD Display Module, Blue Screen White Character Serial Peripheral Interface

  • The module is a low-power consumption character LCD Module with a built-in controller..
  • The module can be easily interfaced with a MCU..
  • Display Format: 20 Characters x 4 lines..
  • It is fantastic for Arduino based project..
  • Fully assembled and tested Serial LCD 20x4 Module..
Check Stock

Treedix 3.5 inch TFT LCD Display 320 x 480 Color Screen Module Compatible with Arduino UNO R3 Mega2560

  • Color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor)..
  • Composed of a color TFT-LCD panel, driver IC, FPC and a back light unit..
  • The module display area contains 320x 480pixels..
  • This product accords with RoHS environmental criterion..
  • Compatible with Arduino UNO R3 Mega2560 DUE..
Check Stock

LCD Touch Panels Touchpanel Analog for DOGM128-6 (EA TOUCH128-1)

  • ...fers 1 G Hz Cortex A8 CPU driving device and 256 Flash memory for HMI projects. You also get RS232/TTL UART Interface and USB port. The module is compatible with 7/28V wide operation voltage. (This is an excellent choice for your Arduino and Raspberry Pi projects.).
  • Clear, Detailed, Hi Res HD - Our Smart HMI TFT LCD display offers excellent 800x480 high resolution with 4-wire resistance touch screen. Rich 262K (18bit) color for high color restore. Rectangular ratio 16:9 display format conversion. 70°/70°/50°/70° wide viewing angle, adjustable brightness（300 cd/m²) , TTF Font and contrast (500:1) offers you the ultimate project experience to accomplish more with improved results..
  • Ultimate TFT LCD Display Module for Industry - SCBRHMI Intelligent TFT-LCD Module Model STWI070WT-01 is a customer favorite for a wide range of industrial and business applications. You get highest quality with the most usable functions. Often purchased for equipment in medical, beauty, engineering, industrial control, electric power, civil electronics, automation, traffic, new energy, and IOT applications..
  • Generous 3 Year Warranty - We make SCBRHMI products to last and work well on the job. If this breaks, return it and we will replace it at no cost. Our displays ....
Check Stock

Character Negative LCD Module 16x2 RGB Backlight for Arduino and MCU projects

  • 16x2 Character LCD module with RGB backlight.
  • HD44780 compatible with FSTN Positive display.
Check Stock