Categories

Best Lead Screw Shaft

2PCS 300mm Linear Motion Rod Shaft Guide & （300mm）8mm Lead Screw & 4PCS SK8 Shaft Support & 4PCS SCS8UU Bearings & 2PCS KP08 & 2PCS Flexible Shaft Couplings

  • 2PCS 300mm Linear Motion Rod Shaft Guide.
  • 2PCS KP08 & 2PCS Flexible Shaft Couplings.
Check Stock

Mssoomm 20mm CNC Ballscrew Kit SFU2010 RM2010 Anti-Backlash Ball Screw, L 59.06 inch / 1500mm + Nut + BK/BF15 Bearing End Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK15 integrate with Motor Bracket for stepper motor Nema 23/BF15 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 8mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock

Mssoomm 16mm CNC Ballscrew Kit SFU1605 RM1605 Anti-Backlash Ball Screw, L 59.06 in/1500mm + Nut + BK/BF12 Bearing End Block Supports + Coupler + Nut Housing+ Motor Bracket for Nema 23 Stepper Motor

  • Nut + BK12 integrate with Motor Bracket for stepper motor Nema 23/BF12 End support with locknuts and circlips + Flexible coupler + Ball Screw Nut Housing, (The coupler bore for the motor shaft is 6.35mm in default),Precision C7 Grade.
  • The product can ensure motor shaft, coupling axial, axial bearing hole, and screw axis all in a line strictly, to make the transmission system run more accurately and sturdily, less noise and longer life.
  • The ballscrew is no stick-slip effect, heats up less, reduce driving power required, small starting torque, able to apply high speed and micro-feeding.
  • The material of the bk bearing support and Motor Bracket is cast steel, high hardness, shock resistance and high precision machining.
  • We can provide complete information of the products, the drawing is showed in the image 6.（If you need CAD and 3D modeling files, you could give us Amazon Message）, we have full ranges of ballscrew products, any special needs, please let us know.
Check Stock

OTC 4676 Windshield Wiper Puller

  • Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks.
  • Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal.
  • Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm.
  • Tool features a throat depth of 1-1/16 inches.
  • foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter.
  • Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance.
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • ...fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel....
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

3 Inch Cast Iron Pulley and Precision Bearing (300 lb Load)

  • Garage Door Parts - Garage Door Hardware - Garage Door Shaft Collar Shaft Collar.
  • Dimensions: 1″ Bore, 1-7/16″ Outside Diameter, 9/16″ Wide.
Check Stock

Sydien 4 Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench

  • Metal: Fine plating metal, hardened by heat treatment, and then electroplated..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily..
  • Package: 4Pcs Flange Shaft Coupling + 1Pc Mini Hex Wrench + 10Pcs Fastening Screw..
Check Stock

Aobbmok 1/2\ Bore Solid Steel Style Zinc Plated Set Screw Shaft Collars

  • Product Name :Zinc Plated Set Screw Shaft Collars.
  • Material : High quality Carbon Steel with Zinc Plated Coating.
  • Package Content : 4-Pieces 1/2" Zinc Plated Shaft Collars with 1Pcs Set Screw..
Check Stock

8MILELAKE Auto Truck Dent Puller Tool Set with 10lbs Universal Slide Hammer 13pc Dent Repair Tool

  • ...s dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
  • 【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.
  • 【A Storage Case】Comes with a portable plastic case for easy carrying. Keeps all the repair tools tidy and resist abrasion.
Check Stock

EMILYPRO Shaft Arbor Extension 1/2  and 5/8 / Motor Arbor Threaded Shaft Adapter for Buffing Grinding Wheels / Fit for Bench Grinder - Right 1 Pack

  • 【Function】This Shaft Arbor Extender is designed to convert 1/2" or 5/8" shaft electric motor to 1/2" threaded shaft buffing machine, or transfer....
  • 【Application】This Electric Motor Arbor Threaded Shaft Adapter suitable for mounting Buffing wheels, Polishing wheels, Grinding Wheels, Wire brush....
  • 【Using Method】To Attach the tube side to your motor arbor or bench grinder shaft, fasten the hidden screw to make it fastness, use the 2pcs....
  • 【Advantage】Making your Motor like a transformer, which is cost saving. just a small Motor arbor shaft extension adapter can create a new grinder....
  • 【Dimension】Tube side OD x ID x L：7/8" x 5/8" x 1-5/8".
Check Stock

CUESOUL Integrated Dart Shaft and Flights Medium-3 PCS

  • Black,with modern and attractive pattern design on flights by CUESOUL.
  • Total 69mm(2.7-1/6 inches ,not include screw).
  • Shaft Length:28mm(1.1 inches) ,measured from the edge of the screw to the joint between the flight and shaft..
  • Precision moulded dart flights assure the flights at 90 degree for perfect flight in each shoot..
  • Made of special material between hard and soft,make the shaft flexible, avoid flights ripped out caused by previous dart,durable use for your dart game.
Check Stock

Musiclily Pro 6mm Steel Knurled Flat Top Barrel Knobs with Set Screw for Telecaster Electric Guitar or Precision Bass Chrome Set of 2

  • Fits for many electric guitars and basses, including Fender and Squier Strat/Tele/Precision Bass/Jazz Bass and other similar style guitar bass.
  • Compatible with 6mm (15/64 inch) solid shaft, coarse spline and fine spline split shaft potentiometers, good for most imported pots like Alpha and USA made split shaft pots. DO NOT fit for USA standard 1/4 inch (6.35mm) solid shaft pots.
  • Height: 19mm (3/4 inch), outer diameter: 19mm (3/4 inch), inner hole diameter: 6mm (15/64 inch).
  • Made of quality steel, knurled flat top knobs, with set screw to secure the knob to the shaft. You need to tighten the set screw in line with the split when installing this knob on a split shaft pot.
  • Package includes: 2 pieces knobs and screwdriver.
Check Stock