Categories

Best Lead Stabilizer

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 15" x 25 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 12" x 50 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

New brothread Fusible Iron on No Show Mesh Machine Embroidery Stabilizer Backing 12" x 25 Yd roll - Light Weight 1.8 oz - 3 Options - Tear Away/Cut Away/No Show Mesh

  • ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
  • ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
  • ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
  • ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....
Check Stock

New brothread Tear Away Machine Embroidery Stabilizer Backing 8"x8" - 100 Precut Sheets - Medium Weight 1.8 oz- Fits 4x4 and 6x6 Hoops

  • ▶TEMPORARY STABILIZER: It provides temporary support for embroidery projects. They are best used on firmly woven fabrics and fabrics made from natural fibers. Our tear away embroidery stabilizer can be torn away easily yet provides adequate stability..
  • ▶WIDE APPLICATIONS: Best used on natural fibers, thicker and softer fabrics. Great for hoop embroidery, applique, thread stretching, computerized lace embroidery and decorative stitch sewing..
  • ▶SKIN-FRIENDLY MATERIAL: 100% first-class Polyester which is acid and lead free! No any itching worries even you use our tear away embroidery stabilizer on your skin-touch clothes..
  • ▶EASY TO USE: Hoop the tear away embroidery stabilizer together with the fabric, then stitch. After finishing your project, just tear the stabilizer away easily and clean in either horizontal or vertical directions around the stitches..
  • ▶MEDIUM WEIGHT FOR ALL THE STITCH DENSITY (COUNTS): It is medium weight 1.8 oz (50 Grams) tear away embroidery stabilizer for light to medium stitch density, for much denser designs, you can use more than one layer..
Check Stock

New brothread Cut Away Machine Embroidery Stabilizer Backing 8"x8" - 100 Precut Sheets - Medium Weight 2.5 Ounce - Fits 4x4 and 6x6 Hoops

  • ▶PERMANENT STABILIZER: It is a permanent stabilizer will remain forever affixed to the embroidery and will provide permanent support for the design, it also helps retain the design's shape after repeated washing..
  • ▶WIDE APPLICATIONS: Best used on knits, fleece, denim and for fabric that is unstable, moves or distorts when tugged on. Great for hoop embroidery, applique, thread stretching, computerized lace embroidery and decorative stitch sewing..
  • ▶SKIN-FRIENDLY MATERIAL: 100% first-class Polyester which is acid and lead free! No any itching worries even you use our cut away embroidery stabilizer on your skin-touch clothes..
  • ▶EASY TO USE: Hoop the cut away embroidery stabilizer together with the fabric, then stitch. After finishing your project, just roughly cut the excess stabilizer from the fabric. Then using sharp scissor to trim close to the stitches..
  • ▶MEDIUM WEIGHT FOR ALL THE STITCH DENSITY (COUNTS): It is medium weight 2.5oz (70 Grams) cut away embroidery stabilizer for light to medium stitch density, for much denser designs, you can use more than one layer..
Check Stock

New brothread Wash Away - Water Soluble Machine Embroidery Stabilizer Backing & Topping 10' x 25 Yd roll - Light Weight - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

  • ▶COLD WATER SOLUBLE: It dissolves completely when immersed in cold or warm water leaving no backing at all. A great choice for both embroidery backing and topping. Perfect when you need an embroidery stabilizer to be disappeared..
  • ▶WIDE APPLICATIONS: Best used on washable fabric and high pile fabric such as terry cloth, towels, fleece and other fluffy materials that requires the complete removal of the stabilizer. They are most widely used in free standing embroidery applications such as free standing lace (FSL)..
  • ▶SKIN-FRIENDLY MATERIAL: 100% pure natural material which is non-toxic and acid and lead free! No any itching worries even you used our wash away embroidery stabilizer on your skin-touch clothes..
  • ▶EASY TO USE: Hoop the wash away (water soluble) embroidery stabilizer together with fabric, then stitch. After finishing your project, just put the embroidery design into water, the stabilizer will disappear leaving nothing behind..
  • ▶LIGHT WEIGHT FOR ALL THE STITCH DENSITY (COUNTS): It is light weight 1.5 oz (40 Grams) wash away embroidery stabilizer for light to medium stitch density, for much denser designs, you can use more than one layer..
Check Stock

Futuro - 70005242162 FUTURO Comfort Knee Support with Stabilizers, Ideal for Sprains, Strains, and General Support, Breathable, Medium grey

  • Directions: When to use: This Futuro sport adjustable knee stabilizer is designed to provide support to stiff, weak or injured knees. Wear during activities which lead to discomfort. If discomfort or pain results, persists or increases, discontinue use and consult a physician. Washing: Attach all closures before washing. Hand wash with mild soap in warm (not hot) water. Rinse well and air dry. Do not: machine wash, tumble dry, dry clean, or use bleach or fabric softeners. How to wear: 1. Lay stabilizer over knee, smooth side against skin and with single strap to the outside of leg. Place round hole over kneecap. Wrap middle strap under knee and attach hook closure to the stabilizer. 2. Wrap each of the two remaining outside straps under knee and attach closures to the stabilizer. Adjust all straps until fit is firm, yet comfortable..
Check Stock

Superpunch Wash-Away Water Soluble Stabilizer for Embroidery - 9 inch x 10 Yard Roll, Fabric Stabilizer, Embroidery Backing & Cut Away Stabilizers - SuperStable Machine & Hand Sewing - Made in USA

  • MADE IN USA WASH AWAY STABILIZER: This USA-origin cut-away embroidery stabilizer dissolves completely when immersed in cold or warm water. Our water-soluble embroidery topping is made in the USA & a great choice for topping. This American-made product is best used on washable fabric and high-pile fabric such as terry cloth, towels, fleece, and other fluffy materials that require the complete removal of the stabilizer..
  • FABRIC STABILIZER SPECS: The thickness of this embroidery paper dissolve is 20 microns & the size is 9 inches wide & 10 yards per roll. (a minimum of 9 inches wide/ you may even receive up to 9.75"). Ideal to leave your stitches on top of your garment. No, itching worries even if you used our wash-away topping stabilizer on your skin touch. It can also be used on top of a high-profile fabric to hold down its nap, or pile. Very popular on towels and polar, sweaters, fleece & other soft knits..
  • EASY TO USE: Hoop the wash-away (water soluble) embroidery stabilizer together with fabric, then stitch. After finishing your project, just spray the embroidery design with water, and the water-soluble stabilizer will disappear leaving nothin....
Check Stock

VP Racing Fuels Madditive Fuel Stabilizer with Ethanol Shield - 8 oz.

  • Stabilizer prevents ethanol-related problems and keeps vital engine components clean and running at peak performance.
  • Use up to 3 years (when used 1 oz. per one gallon of fuel).
  • Our fuel stabilizer bonds with gasoline to stop evaporation, stabilizing gas prevents it from forming sticky resins that can lead to serious engine trouble.
  • Technologically advanced formula includes a superior detergent that cleans gums, varnish, and carbon deposits while eliminating the need for high-octane premium pump gas.
  • Gas treated with VP Fuel Stabilizer received a perfect 5.0 score on NACE Standards Test for Ferrous Metals.
  • Helps reduce engine heat and extends engine life by lubricating the ethanol in gasoline.
  • By reducing friction you reduce the amount of heat caused by friction.
Check Stock

New brothread Sticky Self-Adhesive Tear Away Embroidery Stabilizer Backing 12" x 10 Yd roll - Medium Weight for Napped Fabric & Hoop Less Embroidery

  • ▶ Sticky Tear Away Embroidery Stabilizer: It is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop. Our sticky tear away embroidery stabilizer can be torn away easily yet provides adequate stability, leaving no tears and residue..
  • ▶ Tips for keeping Needles from Getting Gummed up: 1,Slow down the stitch speed to 400spm. High stitch speed will generate more heat to melt the glue, making the needle to be gummy. 2,Rub the needle with Sewer Aid - a type of lubricant to reduce friction when stitch. 3,Using the special needle . The recommended is the Organ Anti-glue needle. 4,clean the needle with alcohol usually. 5,follow the correct steps to use sticky embroidery stabilizer(Please refer to the third pic in the description)..
  • ▶ Wide Applications: Sticky tearaway embroidery stabilizer is ideal for hard to hoop items like bulky towels, cuffs, collars, socks, doll clothes, edges, cap, backpacks, napkin corners, pockets etc. without basting them. Also use for fabrics that can be damaged by the hooping process, fabrics like leather, velvet, brushed flannel, towel, fleece and satin et....
Check Stock

VP Racing Fuels Madditive Fuel Stabilizer with Ethanol Shield - 8 oz. (9 Pack)

  • Stabilizer prevents ethanol-related problems and keeps vital engine components clean and running at peak performance.
  • Use up to 3 years (when used 1 oz. per one gallon of fuel).
  • Our fuel stabilizer bonds with gasoline to stop evaporation, stabilizing gas prevents it from forming sticky resins that can lead to serious engine trouble.
  • Technologically advanced formula includes a superior detergent that cleans gums, varnish, and carbon deposits while eliminating the need for high-octane premium pump gas.
  • Gas treated with VP Fuel Stabilizer received a perfect 5.0 score on NACE Standards Test for Ferrous Metals.
  • Helps reduce engine heat and extends engine life by lubricating the ethanol in gasoline.
  • By reducing friction you reduce the amount of heat caused by friction.
Check Stock

New brothread Tear Away Machine Embroidery Stabilizer Backing 12' x 50 Yd roll - Medium Weight 1.8 oz - Cut into Variable Sizes - for Machine Embroidery and Hand Sewing

  • ▶TEMPORARY STABILIZER: It provides temporary support for embroidery projects. They are best used on firmly woven fabrics and fabrics made from natural fibers. Our tear away embroidery stabilizer can be torn away easily yet provides adequate stability..
  • ▶WIDE APPLICATIONS: Best used on natural fibers, thicker and softer fabrics. Great for hoop embroidery, applique, thread stretching, computerized lace embroidery and decorative stitch sewing..
  • ▶SKIN-FRIENDLY MATERIAL: 100% first-class Polyester which is acid and lead free! No any itching worries even you use our tear away embroidery stabilizer on your skin-touch clothes..
  • ▶FIT MOST OF THE HOOPS: The width 12″(30.5cm) allows you to cut into more variable sizes to fit most of the hoops for your home-based and commercial embroidery machine..
  • ▶MEDIUM WEIGHT FOR ALL THE STITCH DENSITY (COUNTS): It is medium weight 1.8 oz (50 Grams) tear away embroidery stabilizer for light to medium stitch density, for much denser designs, you can use more than one layer..
Check Stock

Canon EF-S 10-18mm f/4.5-5.6 IS STM Lens

  • EF S ultra wide zoom lens. Drive System Lead screw and rack system driven by stepping motor.
  • Focal Length and Maximum Aperture: 10 18 millimeter, 1:4.5.
  • Stepping motor for noise free video shooting.
Check Stock