Categories

Best Leaf Spring To Coil Conversion Kit

Detroit Axle - Rear Strut & Coils Spring Assembly Conversion Kit Replacement for 1997-2002 Ford Expedition 2WD - [1998-2002 Lincoln Navigator 2WD] - 2pc Set

  • Replacement for 1997-2002 Ford Expedition 2WD - [1998-2002 Lincoln Navigator 2WD].
  • Kit Includes: (2) Rear Strut Coil Spring Conversion Kit Assembly.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
  • Undergo impact, wear, and fatigue testing to help ensure quality and durability.
Check Stock

Godspeed MRS1432-A Godspeed MRS14320-A MonoRS Coilover Suspension Lowering Kit, 32 Damping Adjustment, Ride Height Adjustable, compatible with Toyota Camry SE/XSE (XV70) 2018-21

  • Compatible With Nissan 350Z (Z33) 2003 2004 2005 2006 2007 2008 2009.
  • TRUE COILOVER CONVERSION FOR REAR STRUTS.
  • Spring Rate: Front - 14 kg/mm (784 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways.
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock

Detroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set

  • Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
  • This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
  • This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
  • Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
  • 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
Check Stock

Godspeed MSS0175 compatible with Lexus LS400 UCF10 1990-95 MonoSS Coilovers Suspension Lowering Kit

  • Compatible With Lexus LS400 (UCF10) 1990 1991 1992 1993 1994.
  • Spring Rate (Front/Rear) : 12 kg/mm/8 kg/mm.
  • 52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track.
  • Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke.
  • Powder Coated CNC Machined Aluminum And Carbon Steel Accessories.
  • Full 1 Year Limited Warranty From Date Of Purchase.
  • Install By Experienced Professionals Is Highly Recommended.
Check Stock

Rev9 R9-HS2-008_2 Hyper-Street II Coilover Suspension Lowering Kit Mono-Tube Shock w/ 32 Click Rebound Setting Full Length Adjustable compatible with Infiniti G35 Coupe V35 2003-07

  • Compatible With Infiniti G35 Coupe (V35) 2003 2004 2005 2006 2007.
  • Spring Rate: Front - 14 kg/mm (784 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount //....
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To....
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
Check Stock

R9-HS2-048_2 compatible with Infiniti G37 Coupe/Sedan RWD (CV36/V36) 2009-13 Hyper-Street II Coilover Kit w/ 32-Way Damping Force Adjustment Lowering Kit by Rev9, 32 Damping Level Adjustment

  • Compatible With Infiniti G37 Coupe / Sedan RWD (CV36/V36) 2008 2009 2010 2011 2012 2013.
  • TRUE COILOVER CONVERSION FOR THE REAR STRUTS.
  • Spring Rate (Front/Rear) : 14 kg/mm (784 lbs/inch)/12 kg/mm (672 lbs/inch).
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are "Lowering Kit" and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock

Rancho RS8131 Leaf Spring Alignment Clamp Kit

  • COMPATIBILITY -- Universal fit to work with most aftermarket lift kits.
  • MAINTAINS SUSPENSION ALIGNMENT -- 2.5-In. wide leaf alignment clamp kit keeps spring pack aligned for proper suspension.
  • FOR LEAF ADDITIONS -- Use when adding a leaf to a factory spring pack.
  • ENGINEERED TO LAST -- Made of carbon steel for long service life.
  • HARDWARE INCLUDED -- Kit includes everything you need for one side - two U-clips and cap (purchase an additional kit if you're doing both sides).
Check Stock

Godspeed MSS0175 MonoSS Coilover Lowering Kit Fully Adjustable Ride Height Spring Tension And 16 Click Damping compatible with Lexus LS400 UCF10 90-94

  • Compatible With Lexus LS400 (UCF10) 1990 1991 1992 1993 1994.
  • Spring Rate (Front/Rear) : 12 kg/mm || 8 kg/mm.
  • 52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track.
  • Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke.
  • Powder Coated CNC Machined Aluminum And Carbon Steel Accessories.
  • Full 1 Year Limited Warranty From Date Of Purchase.
  • Install By Experienced Professionals Is Highly Recommended.
Check Stock

Detroit Axle - All (4) Front & Rear Strut & Coil Spring Assemblies for Models with 16' Wheel - [2000-11 Chevy Impala/Monte Carlo]

  • Kit Includes: (2) Front Complet Quick Install Strut & Coil Spring Assembly, (2) Rear Complet Quick Install Strut & Coil Spring Assembly.
  • For - 2000-2011 Chevrolet Impala / Monte Carlo - [1998-2002 Olds Intrigue].
  • For Models with 16" Wheels ONLY - without Police/Taxi Package (Excludes SS).
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
Check Stock

Flexrake CF22 Spring Rake 21-Inch Metal Head with 48-Inch Wood Handle

  • Flex rake Metal Spring Action Leaf Rake With 48 Inch Wood Handle 22in In many parts of the country waking up on an early November morning can mean standing in fallen leaves, usually ankle deep.
  • One of landscaping earliest tools was devised to gather up the leaves and prevent them from blocking the sunlight and moisture so critical for a healthy lawn.
  • Metal was one of the original materials used to manufacture leaf rakes.
  • 22 Continuous tines and a chrome plated spring coil work to quickly sweep the surface of the lawn to moves leaves out of the way.
  • Regular lawn raking is healthy for your grass.
Check Stock

ARES 15050-3-Piece Internal Coil Spring Compressor Kit - 4.17-Inch to 11.54-Inch Telescoping Spindle - Discs Cover Internal Spring Diameters Over 2.95 Inches and External Diameters Under 6.1 Inches

  • WHY YOU NEED IT: Safely and easily compress coil springs with our 3-Piece Internal Coil Spring Compressor Kit! Our kit's convenient universal design allows you to compress a wider variety of coil spring applications than most kits on the market with only two discs, eliminating guesswork. The included discs work on springs with an internal diameter over 2.95 inches and an external diameter under 6.1 inches. The telescoping spindle has adjusts to any length between 4.17 inches and 11.54 inches..
  • DESIGN CONSIDERATIONS: This kit is made of high quality steel and safe for use with your pneumatic or impact wrench, saving you time during spring compression. A built-in locking pin design ensures a secure connection between the spindle and discs, so you can compress with confidence. The discs' design also compresses coils more evenly and more safely than compressors with a jaw design. The set includes a high quality storage case to store your tools when they're not in use!.
  • APPLICATIONS: This set is compatible with Alfa Romeo, compatible with Audi, compatible with BMW, compatible with Chevy, compatible with Citroen, compatible with Fiat, compatible with Ford, compatible with Honda, compatible with Hyundai and Kia, compatible with Lancia, compatible with Mazda, ....
Check Stock

Detroit Axle - Front and Rear Strut w/Coil Spring Assembly Sway Bar Links Replacement for 2007-2011 Toyota Camry - 8pc Set

  • Kit Includes: (2) Front Strut & Coil Spring Assembly, (2) Rear Strut & Coil Spring Assembly, (2) Front Sway Bar Links and (2) Rear Sway Bar Links.
  • Complete Strut Assembly - Equipped with Strut, Coil, Spring & Mounts - Ready to Install.
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation.
Check Stock

LIBRA 7000# 7k Tandem Trailer Axle Suspension Kit Leaf Spring/U-Bolt/Hanger Kit

  • 3,500lbs capacity per each spring, for standard 7,000lbs trailer axle , Eye to Eye length: 25-1/4", Free open: 3", width of leaf: 1-3/4", 6 leaves, 9/16" bushing dia.
  • It will replace SW6 / LIB-601-DE / UNA223 / PR6 / 9150021 (different SKU# but same spring).
  • Include 5,200-7,000lbs axle U-bolt kit for 3" dia round trailer axle, Kit include: 4 x 7" long U bolts, U bolts dia. 1/2".
  • 2 x tie plates for 1-3/4" or 2" leaf springs.
  • Include Complete tandem trailer axle hanger kit for 1-3/4" leaf springs, Kit include: 2 x EQ-E1 equalizers, 6 x 3" tall hangers, 8 x shackle straps, 14 x 9/16"-18 x 3" long shackle bolts and locknuts.
  • LIBRA has been supplying US OEM trailer industry for over 16 years, reliable and quality parts trusted by major trailer & trailer axle manufacturers..
Check Stock