Categories

Best Leaf Spring Valve

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

Supreme Suspensions - Universal Add-A-Leaf Spring Installation Tool | Heavy Duty Forged Steel Leaf Spring Unloading/Compressing Tool Powder Coated Black

  • HEAVY-DUTY TOOL DESIGNED TO SAFELY INSTALL A SET OF ADD-A-LEAFS OR IN-PACK-HELPER SPRINGS.
  • Suitable for Most Trucks and SUVs with leaf spring suspension..
  • CONTENTS: (1x) Leaf Spring Unloading/Compressing Tool, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: Cold-Forged from High Strength Carbon Steel for Maximum Strength and Durability.
  • Self-Centered, U-Shaped Design to Completely Surround the Spring Pack Allowing an Even Unloading and Compression of your Leaf Springs..
  • EASY TO USE: Position the Leaf Spring Unloading/Compressing Tool over the spring pack, and tighten down the compression bolt to safely unscrew the center pin nut, and remove the leaf pack center pin. After removing the center pin, loosen the compression bolt until the springs decompress, allowing you to safely add the new add-a-leaf in the appropriate location. Reinstall the leaf pack by tightening the compression bolt and reinstalling the center pin..
  • BENEFITS: Allows for Even Unloading and Compression of your Leaf Springs to install a set of Add-a-Leafs or In-Pack-Helper Springs..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

Belltech 5986 Leaf Spring

  • Belltech's leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 inches depending on application.
  • By recalculating the arch of the leaf spring and compensating with the appropriate spring rate through the latest manufacturing techniques.
  • All Belltech Leaf Springs are direct OEM replacements.
  • Come complete with high quality OEM style bushings.
  • OEM ride quality with added performance, control and comfort.
Check Stock

Howards Cams 96210-30-1: Valve Spring Shim; 1.250 .030

  • Valve Spring Shim Outside Diameter: 1.250.
Check Stock

Valve Spring Compressor, Auto Compression Clamp Tool Service Kit for ATV, Car, Motorcycle,Small Engine Vehicle Equipment,Valve Spring Compressor ToolsAutomotive Tool C Clamp Service Set,10 Pcs

  • Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression..
  • Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case.
  • Solid Valve Spring Compressor Kit to effortlessly reset your valve springs. The Orion Kit comes fully stocked with 5 collets to fit hundreds of makes and models, such as motor....
Check Stock

Stud Mount Valve Spring Compressor Fits For All 3/8 and 7/16 Rocker Studs Alternative to Part # 66784 62370

  • APPLICATION: Universal valve spring remove tool fits for all 3/8'' and 7/16'' rocker studs, specially designed for compressing valve springs with the....
  • FUNCTION: Simplifies between-rounds valve spring changing. Easily and quickly replace valve springs, remove valve spring from an assembled engine for....
  • Easy to use: The tool disassembles easily. Use the principle of leverage, press down to compress coil spring, then remove valve keepers, and release....
  • MATERIAL: Made of heavy-duty steel, treated with anti-rust and anti-corrosion, solid and durable. A strong, durable handle withstands the most extreme....
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..
Check Stock

labwork Universal Overhead Valve Spring Compressor Valve Removal Installer Tool for Quick Removal of Valve Springs

  • This product is designed for quick removal of the valve spring without removing the cylinder head,fit for most cars and light trucks..
  • Offset pliers facilitate clamping and compression of valve springs..
  • Surface blackened treatment,rust-proof and corrosion-resistant..
  • Perfect for removing valve springs,spring retainers by compressing the valve spring retainer and exposing the valve keeper,remove keepers,uncompress the tool then remove spring..
  • If you have any problem after receiving it,please contact us and we will solve it for you..
Check Stock

Belltech 5983 Leaf Spring

  • Belltech's leaf springs are designed to easily lower the rear of your leaf spring equipped Sport Truck or SUV by up to 4 inches depending on application.
  • By recalculating the arch of the leaf spring and compensating with the appropriate spring rate through the latest manufacturing techniques.
  • Come complete with high quality OEM style bushings.
  • OEM ride quality with added performance, control and comfort.
Check Stock

EWK 2 Sizes Valve Spring Compressor Kit, Valve Keeper Remover/Installer, Retainer Removal Tool for Motorcycle, Car

  • 【 Highly Versatile 】 Specially designed to remove valve spring quickly without removing cylinder head. Works on gas or diesel overhead valve engines of automobiles, motorcycles, and boats..
  • 【 Easy Operation 】 No need the painful C-clamp valve spring compressor anymore! This tool fast removes and installs valve keepers on most overhead valve engines with valve stems from 4.5 to 7.5mm and 7.9 to 9.5mm..
  • 【 Smart Design 】 EWK Valve Keeper Tool has built in magnet, immediately attracts the keepers up before they dropping into the engine to avoid any potential damage. Simply push or tap the tool by hand or with a hammer to disassemble the valve set..
  • 【 High Quality 】 Made of rust-resistant material, the valve tool will neither bend nor the valve spring get loosen. Built to last for a life time use, the real money saver for your professional workshops or garages..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

Teavana, SBK12434034, Assorted Tea Collection, 384 / Carton

  • ... FOR LOOSE LEAF: This magical tea accessory is a clean and efficient way to steep hot and iced loose leaf tea..
  • SPECIALLY DESIGNED FILTRATION SYSTEM: The fine mesh nylon filter will strain your tea into your cup while keeping the tea leaves in the infuser. Its easy-release valve makes for no fuss drink making and can be removed for easy cleaning..
  • BPA-FREE, SHATTER-RESISTANT TRITAN: It’s made of durable clear Tritan plastic so you can measure the amount of water desired and watch your tea steep to perfection. The material is also odour-resistant, making it suitable for chai teas and other strong-scented loose leaf blends..
  • QUICK, CONVENIENT & EASY TO USE: Our Steeper is a quick and mess-free way to make a perfect cup of tea at home. Just add your loose leaf tea and hot water, let it steep and when you’re ready to sip, just place the Steeper right on your cup and watch as your tea pours out like magic. And when you’re done, the valve closes automatically..
  • SMART DESIGN: Our Steeper is an exclusive design produced at HandyBrew. We wanted an at-home tea-maker that could do i....
Check Stock

16 Pack Performance Beehive Valve Springs Kit Compatible with 2002-2017 Cadillac CTS Chevrolet Camaro Corvette SS SSR Trailblazer Pontiac G8 GTO Fit for Engine LS1 LS2 LS3 LS6 LS9 8 Cyl Part# 12499224

  • ✅【VALUABLE CHOICE】 ➤ Durable material to meet or exceed OE standard quality. ➤ Valve spring assembly with superior strength, durability and valve train stability, no matter what the application. Easily handle the increased lift in extreme stress applications. ➤ Durable construction delivers long-lasting valve springs. ➤ Decent price for valve spring kit Set of 16..
  • ✅【FIX VALVE SPRINGS FAILURE SIGNS】Engine misfire, Tapping or ticking noise, Backfire, Compression loss..
  • ✅【SPECIFICIATION VALVE SPRINGS】➤ Beehive-style, Complete Set of 16 ➤ Outside diameter of outer spring: 1.290 in ➤Coil Bind Height 1.220 in ➤ Spring rate: 375 lbs./in ➤ Max lift .550''.
  • ✅【EXCAT MATCH】 Fit for GM Engine: LS1, LS2, LS3, LS6, LS9, 8 Cyl ➤Compatible with Cadillac CTS 2004-2007 5.7L 6.0L ➤Compatible with 2010-2015 Chevrolet Camaro 6.2L ➤Compatible with 2002-2013 Chevrolet Corvette 5.7L/6.0L/6.2L ➤Compatible with 2014-2017 Chevrolet SS 6.2L ➤Compatible with 2005-2006 Chevrolet SSR 6.0L ➤Compatible with 2006-2009 Chevrolet Trailblazer 6.0L ➤Compatible with 2009 Pontiac G8 6.2L ➤Compatible with 2005-2006 Pontiac GTO 6.0L.
  • ✅【OE PART NUMBER】Single spring: 12625033.
Check Stock