Categories

Best Led 3528 5050

LED Black Light Night Fishing LED Strip UV Ultraviolet Boat bass Fishing 12v dc Pontoon Kayak John Boat Florescent line Glow (16ft)

  • ✅【Product Details】: 4 Pcs 20’’ 50cm led strip lights with each 30 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please test the lights before stick to surface, Please check polarity before wiring..
  • ✅【Widely Application】: The lights are widely used for....
Check Stock

2 Pack 2M 6.5ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • Compatibility: fit for all 10mm 4-pin RGB LED strip lights, for Both 5050/3528 RGB Waterproof and non-waterproof LED strip light..
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play..
  • Operating conditions: The RGB LED strip light extension cable supports maximum wattage of 72W , and 0-24v voltage input. Suitable for most 10mm 4-pin....
  • 2-pack extension cable: The RGB strip extension cables can connect between the IR/RF Controller and 5050/3528 LED strip light, extending strips to the....
  • What You Get: 2 packs 2M/6.5ft RGB Extension Cables, 4 pcs 4 male pin connectors, 8 pcs self-adhesive Cable clips, 30 days money back guarantee plus....
Check Stock

Vbakor 6 Pcs 12'' Boat Interior Lights 12V Marine Courtesy Light Strip, Super Bright 18 LEDs Boat Deck Transom Cockpit Navigation Light, Waterproof Marine Lights for Pontoon Yacht (White)

  • ✅【Product Details】: 6 Pcs 12’’ 30cm White led strip lights with each 18 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Widely Application】: The lights are widely used for boat interior light, cockpit light, deck light, transom light, step light, cabin light, courtesy light, navigation light, stern light, side light, accent atmosphere light, etc..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to sur....
Check Stock

LightingWill 10pcs Pack Strip to Strip Unwired Gapless Solderless Snap Down 2Pin Conductor LED Strip Connector for 8mm Wide 3528 2835 Single Color Flex LED Strips

  • 2 pin connector for 8mm wide SMD3528 2835 single color LED strip (Not suitable for high intensity 120LEDs/M strips).
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • Strip to strip unwired gapless connector,solderless quick snap down,.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2pin 8mm SMD3528 2835 Led strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7H5B4 for 10mm SMD5050 single color LED strips. connector.
Check Stock

Nelyeqwo 2 Pack 5M 16.4ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • High Quality: The LED strip light extension cable insulation made of PVC material, anti-corrosion, wire contains 4 strands of tin-plated pure copper, which is resistant to oxidation, flexible and tough, durable and longer life.
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play.
  • Operating conditions: The RGB LED strip light connectors support maximum wattage of 72W , and 0-24v voltage input. Suitable for most families.
  • Function: The RGB extension cable can connect between IR/RF Controller and 5050/3528 LED strip light, extend strips to the ideal location. Or connect between 2 RGB LED strips, convenient and practical.
  • What You Get: Cost-effective, 2 x 5M 16.4ft RGB Extension Cable and 4 x 4 male pin connector for 10mm 5050/3528 RGB Waterproof and non-waterproof LED strip light.
Check Stock

Vbakor 12V Marine Boat Ultra Violet UV Black Light LED Lights Strip, Night Fishing Lights, 5050 LED IP67 Waterproof UV Led Strip for Fishing Pontoon Kayak Yacht Sailboat (4 Pcs 20'')

  • ✅【Product Details】: 4 Pcs 20’’ 50cm led strip lights with each 30 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please test the lights before stick to surface, Please check polarity before wiring..
  • ✅【Widely Application】: The lights are widely used for....
Check Stock

Vbakor Boat Led Strip Lights, 4 Pcs 24'' Marine Boat Interior Courtesy Deck Navigation Lights, Super Bright Waterproof Marine Led Lights Strip for 12V Pontoon Fishing Boat Yacht Kayak Sailboat (Blue)

  • ✅【Product Details】: 4 Pcs 24’’ 60cm led strip lights with each 36 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please t....
Check Stock

LightingWill 10pcs Pack L Shape Solderless Snap Down 2Conductor LED Strip Connector for Right Angle Corner or 90 Degree Connection of 8mm Wide 3528 2835 Single Color Flex LED Strips

  • 2 pin connector for 8mm wide SMD3528 2835 single color LED strip (Not suitable for high intensity 120LEDs/M strips).
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • L shape for corner or turning connection, solderless quick snap down.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2pin 8mm SMD3528 2835 Led strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7H5B4 for 10mm SMD5050 single color LED strips. connector.
Check Stock

Nexillumi L Shape 4-pin Connectors Angle Adjustable(90-180 Degrees) LED Strip Connectors for 10mm Width 5050 RGB LED Strip Lights(10 Pcs)

  • Only compatible with【4-pin 10mm】5050/3528 RGB LED strip lights and 2835/3528 4-pin 10mm LED Strips, not for 2-pin white 3528/2835 lights, not for dreamcolor chasing LED strip lights, not for tunable white LED strips, not for 2-pin white light strips, please make sure if your LED strips are 4-pin and 10mm.
  • L-shape 90 degree and the corner is adjustable and bent straight without being broken, the cords are intensified cords, and length is customizable.(Extra cables are not included).
  • Suitable for 4-pin 10mm LED strips that are IP65 waterproof and IP20 non-waterproof, please check the user manual in the photo gallery for how to use the LED strip connectors..
  • Remove part of the back-adhesive on the LED strips if you want the LED strips to have stable connections..
  • All products sold by us have a warranty of 365-day free replacement for defective products(Like Broken LED Lights or Power Adapter) and 30 days hassle-free full refund, please rest assured buying these. Thank you for choosing Nexillumi products..
Check Stock

Litever 6-Pack 3.3ft/1 Meter 9x18mm U Shape Aluminum Channels with Diffuser, End Caps and Mounting Clips LED Strip Channels for Max 16mm Wide LED Lightstrip Light Mounting--LL-007-M

  • Compact flat aluminum channels compatible for Lightstrip Plus 2nd. 6 pcs x 3.3 feet Aluminum Channels with frosted Covers + 12 sets of Accessories. (24 pcs end caps, 24 pcs Mounting Clips and Screws). ).
  • Aluminum channels diffusers wide enough for soldering-free easy connectors for 60 or 120 leds per meter 3528 led strips..
  • Aluminum channels with frosted covers wide enough for soldering-free easy connectors for single color or RGB 5050 led tapes..
  • Wider aluminum channels for many 12~16mm wide 3528 5050 5630 waterproof LED strips or any LED strip less than Width 16mm x Height 4mm..
  • This aluminum channel can NOT ensure a spotless lighting effect. No aluminum channel can ensure that. It greatly depends on "the distance between 2 leds" of your LED strips, the brightness of the LED strip, as well as the height of the aluminum channel. To get good lighting effect with this aluminum channel, we recommened LED strips more more than 120 LEDs per meter with high brightness. If you use 30 LEDs/Meter or 60 LEDs/Meter LED strips, the LED dots will be obvious but not that glaring..
Check Stock

2 pcs black 4 Pins LED Splitter Cable LED Strip Connector 4 Way Splitter Y Splitter for One to four RGB 5050 3528 LED Light Strips with 10x Male 4 Pin Plugs -30cm/12inch Long

  • 1 to 4 female connection cable For - 5050/3528 RGB LED Extension Cable is designed for 10mm width LED strips.
  • 1 end to connect with LED RGB controller, the other ends for 4 Reel LED RGB strips.
  • This DC Power Adapter Cable splits 1 power signal into 4, enables you to connect 4color changing RGB LED strips to a single controller.
  • Power supply with sufficient amperage for 4 strips is required.
  • Package Content: 2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on the 4 pins, perfect conductivity)DescriptionDesign: 1 to 4 Splitter Cable Connect four color changing RGB 5050/3528 LED strips to a single controller with this 4 pin splitter cable. No soldering is required, simply match the arrows on the plug. Features: 1). The insulation plastic of this cord adopts high quality PVC, anticorrosive. 2). This extension cord contains 4 strands of pure copper wires inside, which ensures flexibility, durability, and perfect electric conductivity. 3). The cord and the 4pin plugs fit snug. 4). Easy to plug, reliable connection, excellent performance. Just buy with confidence! Note: A power supply with sufficient power for multiple led strips is required. Package Includes:2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on....
Check Stock

6 Pieces 4 Pin RGB Extension Cable LED Strip Connector Cord Wire Solderless Strip Jumper Cables Kit with 12 Pieces Pin Connector for 5050 3528 RGB LED Strip Light (Black, 1.6 FT, 3.3 FT, 6.6 FT)

  • What you get: the package includes 6 pieces of 4 pin RGB extension cable LED strip connectors and 12 pieces 4 male pin plugs for 10 mm 5050/ 3528 RGB waterproof and non-waterproof LED strip light.
  • 3 Different sizes: the length of the LED strip connector cable is 50 cm/ 1.6 ft, 1 m/ 3.3 ft, 2 m/ 6.6 ft, which can meet different DIY needs.
  • 2 Major functions: the RGB extension cable can be connected to IR/RF controller and 5050/ 3528 LED strip to extend the strip to reach an nice position.
  • Or it can be connected between 2 RGB LED strips, which is convenient and practical.
  • Easy to install: with 2 pre-welded female connectors and 12 pieces 4-pin male plugs (copper plated), the installation of these light strip extension cords do not need to be soldered and without tools, saving time.
  • Quality material: the insulation of the LED light strip extension cord is made of PVC material, which is corrosion-resistant.
  • The wire contains 4 strands of tin-plated pure copper wire, which is oxidation-resistant, flexible and durable.
Check Stock

LightingWill 10pcs/Pack Strip Wire Solderless Snap Down 2Conductor LED Strip Connector for 10mm Wide 5050 5630 Single Color Flex LED Strips

  • 2 pin connector for 10mm wide SMD5050 5630 single color LED strip.
  • Working Condition: Can be able to stand up to 4A current and 0-24V voltage.
  • Heat resistance level from -20 ~ 100 degree C..
  • One end with clip to strip, the other with wires as lead.
  • Compatible with both waterproof and non-waterproof light strips (Please peel off silicon on the surface around soldering line area when install waterproof strips ).
  • Package includes: 10x 2 pin connectors for 10mm SMD5050 5630 single color LED strip lights. Please search B01DM7GXIA on Amazon for 4 pin 10mm 5050 RGB strip connectors.
  • Search B01DM7F052 for 8mm 3528 2835 LED strips..
Check Stock