Categories

Best Led Constant Current Power

Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • ... benchtop power supply is a professional power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: Many safety measures are adopt in Kungber DC bench power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circu....
Check Stock

Kungber DC Power Supply Variable, 30V 10A Adjustable Switching Regulated DC Bench Linear Power Supply with 4-Digits LED Power Display 5V/2A USB Output, Coarse and Fine Adjustments with Alligator Leads

  • ...power supply is a professional laboratory power supply regulation device that has a high resolution of 0.01V and 0.01A. You can easily tune it within 0-30V and 0-10A. The backlit 4-digit LED display provides a more accurate readout for the voltage and current value, visible easily even in the low-light conditions..
  • Constant Voltage (C.V.) & Current (C.C.) Mode Automatic Conversion: Easy to dial in the desired voltage and current with the coarse and fine adjustment knob. The constant voltage/current mode can automatically switch with load changes. The conversion of constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact and Various Application: This lab DC power supply is less than 3 lb and measures only 9.5 x 3.4 x 6.1 inches, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. 5V/2A USB Interface could charge your cellphone and provide power for the device which you want to repair, no worry about running out of power..
  • Reliable and Safety: many safety measures are adopt in Kungber lab DC power supply - Grounding wire, Leakage protection,Thermal protection, Voltage overload protection, Power overload pr....
Check Stock

MP3020D 0-30V 0-20A Digital LED Regulated Variable Lab DC Bench Power Supply Adjustable Forced Air Cooling with Power Line Pack Accessories Manual Fit Inverter Industry

  • Adjustable DC Power Supply:✅0-30 volts and 0-10 ampere output.
  • Decimal point automatic carry & LED 4 digits display of voltage function displays. Display accuracy: 0.01V and 0.001A. Clearer visible readout for the voltage and current value, extremely durable, and easily visible even in low-light usage..
  • Constant Voltage and Current:✅Automatic conversion between C.C and C.V modes, which can stably output voltage or current.
  • The independent adjustment knobs allow for a bit by bit adjustment of voltage and current data. The conversion between constant voltage and constant current is indicated by the LED display on the front panel..
  • Compact & 5V/2A USB Interface:✅This power supply features the latest flame-retardant material housing for lightweight and high performance while maximizing impact resistance for safety. 5V / 2A USB port provides power to charge your phone or the device you want to repair without worrying about running out of power..
  • Multiple Protection Functions:✅Intelligent temperature adjustment function with an integrated thermal sensor can effectively reduce the temperature during operation, effectively reduce noise. The power supply is durable and compact. Multiple Protections include boundary current protection, thermal protection,....
Check Stock

INVENTRONICS EUC-026S070DS 26W 700mA 19-37 Vdc Dimmable Outdoor Constant Current LED Driver

  • Input: AC100-240V 50/60Hz Output: Current 1500mA (Constant).
  • Size: 140.2*38.6*30.1 (mm) / 5.52*1.52*1.19 (inch) Net Weight: 250g / 8.83oz.
  • High Quality With CE Certificates Long Life Span No Noise Isolation Protection Safety.
  • Efficiency:more than 90% Insulated(Low Heat) High Power Factor(PFC):more than 95% Reliability.
  • Constant Current Power Supply LED Drivers are used for most LED Products.
Check Stock

Adjustable Current LED Driver, DC 3.3V 3.7V 5V LED Driver 30-1500mA Constant Current Adjustable Module for LED 18650 Li-ion

  • This product is a current regulation integrated circuit operating from an input voltage of 2.8V to 6V, the constant output current can be set up to 1.5A with an external resistor..
  • It consists of high precision reference voltage, amplifier, current mirror, etc. The on-chip power transistor and current sense block greatly reduce the external component count, which makes this product ideal for LED driver..
  • When the CE pin is high, the input voltage is greater than 2.8V, and is larger than the LED forward voltage plus the required voltage drop, it functions normally to deliver constant current from the LED pin..
  • Adopts the temperature regulation instead of temperature protection function, the temperature regulation can make the LED being turned on continuously in case of high ambient temperature or high voltage drop. When the junction temperature reaches about 1.
  • With e chip enable function, which can shutdown the whole chip to limit the current consumption within 1uA. Adopts the over current protection block. When LED current approaches 1.9A(Typical), the over current protection block begins to function to prevent the LED current from increasing further..
Check Stock

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

Banda 1-Channel Vehicle Audio Bass Amplifier - High-Powered Mono Bass Amplifier w/Subsonic Filter and Low Pass Filter Stable at 1 ohm LED Indicators Sound Specialization - BANDA VIKING8001

  • POWER SUPPLY: Class D vehicle audio amplifier, Total Power 14,4 @ 1 Ohms: 9500 WRMS, Total Power 14,4 @ 2 Ohms: 7400 WRMS, Total Power 12,6 @ 1 Ohms: 8000 WRMS, Total Power 12,6 @ 2 Ohms: 6100 WRMS, Efficiency @ 2 Ohms: 83%, Efficiency @ 1 Ohms: 73%.
  • MONO BASS AMPLIFIER INDICATORS: Blue LED: source and powered amplifier indicator, Red LED: output distortion (clipping), Constant - output short circuit indicator, Yellow LED: low voltage battery, Constant - Fuse blown or missing.
  • POWER OUTPUT AND IMPEDANCE: Input Voltage: 9 to 15V, Input Impedance: 22K Ohms, THD + Noise: less than 1%, Input Sensitivity: 160mV – 600mV, Signal to Noise Ratio: 80dB.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • OTHER TECHNICAL SPECS: Recommended Fuse: 400A, Current at Rest: 4,5A, Ave. Current Draw (Sinusoidal): 920A, Ave Current Draw (Music): 400A, Power Wire Gauge: 50mm/0 AWG, Speaker Wire Gauge: 2 x 6mm / 2 x 3 AWG, Size: 2.4’’ x 10.6’’ x 17.7’’.
Check Stock

DROK DC 24V to 12V CC CV Step Down Volts Regulator Constant Current Voltage 8A DC Adjustable Buck Converter 7-40V to 1.2-35V LED Driver Charger Module with Charging Indicator Solar Power Supply DIY

  • Module Properties: non-isolated step-down constant current , constant voltage module (CC CV) charging module.
  • Output voltage :DC 1.2-35V continuously adjustable.
  • Output Current: 8A ( when power tube's temperature exceeds 65 degrees, please add cooling fan ).
  • Constant current range :0.2-8A ( adjustable ).
  • Input 24V Output 12V 5A ripple around 50mV ( excluding noise ).
  • Application: High-power LED constant current driver, rechargeable lithium batteries (including ferroelectric), 4V, 6V, 12V, 14V, 24V rechargeable batteries, nickel-cadmium nickel-metal hydride batteries (battery pack) charging, solar panels, wind turbines.
Check Stock

24-bit LED Ring, 1pc 24 Bit WS2812 5050 RGB LED Ring Lamp Light with Integrated Drivers

  • Constant Current Drive: Each has a 18mA constant current driver, so the color is very consistent even if the voltage varies, and no external choke resistors are required to make the design slim. Amazing LED ring, you can use this LED ring lamp to DIY whatever you can think of.
  • Ideal for DIY: Each LED is addressable because the driver chip is inside the LED. So each pixel can have its own color and brightness as you wish.
  • Rings Connect: The LED ring lamp can be daisy-chained - connect the output pin of one to the input pin of the other.
  • Intelligent Protection: Use only one microcontroller pin to control as many as you can chain together, Intelligent reverse polarity protection, reverse power supply polarity will not damage the IC.
  • Bright LED: 24 ultra-bright smart LEDs are arranged in a circle with 3.3" (85mm) OD, power (5VDC recommended) and ground pins available.
Check Stock

LED Ceiling Light Fixtures IBESTWIN 24W 12 Inch 2600LM Square Low Profile Flush Mount Lighting Fixture for Bedroom, Kitchen, Laundry Room, Living Room 5000K Daylight White

  • ...r Rendering】Made of high-quality LED chips, color rendering index003e80, high color rendering, reflects the colors of real life. The higher the color rendering index, the easier it is for human eyes to distinguish various colors of objects. Will not be easy to fatigue the eyes.
  • ✔【No Flicker】 Use high-quality constant current and constant voltage driver, stable current effectively solve the stroboscopic problem caused by unstable current, fluctuating high and low voltage in different power environments, no flicker, constant current Illumination, to prevent the light decay caused by overheating of the light bulb, the comfortable and natural light protects the eyes and prolongs the life span of the product.
  • ✔【Slim Save Space】 The flat and lampshade look elegant. 0.9 inch led ceiling light body thickness, save space, and there is no depressive feeling when installing on a low floors room. Simple and stylish design, soft and not dazzling light, protect eyes. 24W led ceiling light applicable room range 86-161 square feet (8-15 square meters).
  • ✔【High Quality, Reliable, and Durable】30000Hrs+Lifespan which means it can be used for almost 10 years based on 8 hours/day, no need to replace the ceiling light fixture. Low power consumption, save u....
Check Stock

uxcell COB LED Chip 600mA 1W Strip Light Lamp Pure White High Power 50mmx8mm Luminous Surface for Floodlight

  • Color Temperature:Pure white(6000-6500K).
  • Made of material, Long service life, low consumption, high brightness..
  • This LED chip needs a heatsink for cooling before power on. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
  • Widely used in the replacement of LED downlights, track lights, floodlights, flashlights, stage lights..
  • Note: This LED chip is used with constant current LED driver power supply, and cannot be directly powered by batteries or constant voltage power supply (switching power supply)..
Check Stock

uxcell COB LED Strip Light Lamp Chip 300mA 4W Pure White High Power 100mmx8mm Luminous Surface for Floodlight

  • Color Temperature:Pure white(6000-6500K).
  • Made of material, Long service life, low consumption, high brightness..
  • This LED chip needs a heatsink for cooling before power on. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
  • Widely used in the replacement of LED downlights, track lights, floodlights, flashlights, stage lights..
  • Note: This LED chip is used with constant current LED driver power supply, and cannot be directly powered by batteries or constant voltage power supply (switching power supply)..
Check Stock

uxcell COB LED Chip 300mA 3W Strip Light Lamp Pure White High Power 100mmx9mm Luminous Surface for Floodlight

  • Color Temperature:Pure white(6000-6500K).
  • Made of material, Long service life, low consumption, high brightness..
  • This LED chip needs a heatsink for cooling before power on. Apply thermal grease evenly on the bottom of the light source and the contact surface of the heatsink when installation..
  • Widely used in the replacement of LED downlights, track lights, floodlights, flashlights, stage lights..
  • Note: This LED chip is used with constant current LED driver power supply, and cannot be directly powered by batteries or constant voltage power supply (switching power supply)..
Check Stock