Categories

Best Led Current Control

Kit Accessories Controller + 44-Key IR Remote Control

  • ◆ Fit for RGB LED Strip Light: Suitable for 5050, 3528, 2835 RGB led strip light with 4-Pin connectors. Not for RGBW strips which has 5-pin....
  • ◆ IR remote control: The working range of the remote control is 30 feet.
  • please note that the remote control must be pointed at the controller....
  • ◆ Multi-function: has 12 kinds of static colors, brightness adjustment.
  • Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change.
  • ◆ Safe to Use: Input DC 24V, Max output current is 5.8A. The remote controller is Low voltage, Low heat, no radiation, it is safe and touchable.
  • ◆ 1 to 2 Controller: This led strip Controller can connector 2 roll led strip.
Check Stock

Current Switch, Self-Powered Current Sensing Switch SZC25-NO-AL-CH AC 0.5-50A Adjustable Normally Open Current Sensing Relay for Flash Buzzer Transformer Substation

  • ...CISION & STABLE PERFORMANCE】The product features high quality, high precision, stable performance and long service life. It has the advantages of high precision, more stable heart, and long service life. It is an ideal choice for automated industrial equipment and store monitoring..
  • 【WORKING PRINCIPLES】This AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC current through the AC, isolate the AC current, and output a normally closed switching signal to directly control various automated chemical equipment..
  • 【FAST RESPONSE & LED INDICATOR】The switch has no new limit, and the reaction speed reaches ms. The LED state indicator provides a convenient and intuitive representation of the operating status of the switch. Through-heart structure design, isolation withstand voltage up to 2000V..
  • 【SELF-POWERED SENSING SWITCH】Self-powered, no external power supply required, high-power MOS tube non-contact electronic switch. The operating current of 0.5-50A AC can be adjusted by the potentiometer..
  • 【WIDE APPLICATION】Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street la....
Check Stock

weideer 4 String PV Combiner Box and 20A Solar Charger Controller 12V/24V Adjustable LCD Display for Solar Panel System

  • Product name:4 String PV Combiner Box with 3 Digit Combination Lock Mounting Plate(The current and voltage of each pin of the combiner box is up to 15A/250V DC.12V system up to 720W, 24V system up to 1440W, 48V system up to 2880W.) Product configuration:10Awg Cables.
  • 32A Fuse Holder Base.The fuse base has an LED indicator, if the fuse is burned out, the LED will light up.
  • 63A 2 Pole Miniature Circuit Breaker.Play the role of circuit protection and lightning protect.
  • Controller size:32.29mm*101.94mm*122mm/1.27in*4in* 4.8in.
  • Max.pv input power:260W(12V)520W(24V) Build-in industrial micro controller.
  • Large-screen LCD display/charging and discharging current display/cumulative power generation and discharge power query/ temperature display/light control + delay control/adjustable charge and discharge parameters, with power-off memory and other functions. Dual USB output, the maximum current of 2.5A.
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

BOAOSI 50W 6ohm Load Resistors LED Resistor H7 HID Relay Harness Adapter Anti Flicker Error Decoder Warning Canceller Pack of 2

  • Fixes Light Errors: 6 Ohm 50W LED Load Resistors will fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb....
  • Controls Current Flow: 6 Ohm 50W LED Load Resistors will control the current flow in electrical circuits. It will put a specific amount of resistance....
  • High Quality: 6 Ohm 50W LED Load Resistors is made of high quality materials to sustain a long lasting usage..
  • Easy Imstallation: 6 Ohm 50W LED Load Resistors is easy to install, just connect one wire plug to original car and the other wire plug to lampholder.....
  • Wide Application: 6 Ohm 50W LED Load Resistors will work on any vehicle and can be connected across the turn signal bulbs to simulate the load of a....
Check Stock

NBpower 36V/48V 35A 1500W Brushless DC Square Wave Controller ebike Electric Bicycle Hub Motor Controller

  • 36V or 48V Universal (support both voltage).
  • Torque Simulation Square Wave Controller (more stable, high efficiency, low current consumption, long life).
  • Support LED Control Panel or LCD Control Panel.
Check Stock

RGBZONE 2 Pack 11-Key RF Mini Wireless Remote Controller with DC Connector for Single Color 3528 5050 LED Strip Lights

  • Voltage: 12V DC,Output Current: 6A(Recommended current ＜6A).
  • 1 to 1 remote control pairing: auto save function, the same frequency.
  • turn off the remote control, press the "LIGHT" and "SPEED+" keys within 5 seconds, the light will flash or press the 'Speed' + and 'Speed' at the same time until the light bar flashes, they will be different frequencies..
  • Comes with 11 key Remote Control, very easy to operate.
  • Smooth Dimmer Effect. Speed and brightness adjustable.
  • Can be used to control LED single color strip lights.
Check Stock

24-bit LED Ring, 1pc 24 Bit WS2812 5050 RGB LED Ring Lamp Light with Integrated Drivers

  • Constant Current Drive: Each has a 18mA constant current driver, so the color is very consistent even if the voltage varies, and no external choke resistors are required to make the design slim. Amazing LED ring, you can use this LED ring lamp to DIY whatever you can think of.
  • Ideal for DIY: Each LED is addressable because the driver chip is inside the LED. So each pixel can have its own color and brightness as you wish.
  • Rings Connect: The LED ring lamp can be daisy-chained - connect the output pin of one to the input pin of the other.
  • Intelligent Protection: Use only one microcontroller pin to control as many as you can chain together, Intelligent reverse polarity protection, reverse power supply polarity will not damage the IC.
  • Bright LED: 24 ultra-bright smart LEDs are arranged in a circle with 3.3" (85mm) OD, power (5VDC recommended) and ground pins available.
Check Stock

Casablanca Caneel Bay Indoor / Outdoor Ceiling Fan with LED Light and Wall Control

  • Casablanca Caneel Bay Indoor / Outdoor Ceiling Fan with LED Light and Wall Control.
  • CONTEMPORARY CEILING FAN: The modern rustic nautical Caneel Bay fan comes with LED light covered by painted cased white glass that will keep your home interior current and inspired.
  • MULTI-SPEED REVERSIBLE FAN MOTOR: Direct Drive motor delivers ultra-powerful airflow with quiet performance.
  • Change the direction from downdraft mode during the summer to updraft mode during the winter.
  • LED LIGHT KIT: Energy-efficient dimmable LED light bulbs let you control the lighting and ambiance of the living space.
  • The long lasting bulbs have longer lifespan than traditional bulbs.
  • WALL CONTROL: Turn the modern maiden bronze ceiling ceiling fan on/off and adjust the speed quickly and easily right from your wall switch.
Check Stock

Thermaltake TT Sync SATA Powered 9 Port Addressable LED Controller TT Premium Edition (Compatible with ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync) CL-O015-PL00BL-A,1 Pack

  • SYNC THERMALTKAE PLUS PRODUCT WITH 5V HEADER RGB MOTHERBOARD : Control the lights of Thermaltake PLUS products directly from ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync without installing any extra lighting control software.
  • SUPPORT ALL THERMALTKAE ADDRESSABLE LED PLUS PRODUCTS : Powerful enough to handle up to 9 addressable LED products.
  • THERMALTAKE ADDRESSABLE LED PLUS PRODUCTS : Floe AIO Cooler, iRGB PLUS PSU, Ring PLUS/Pure PLUS Case Fan, W4 PLUS CPU Block, PR22 D5 PLUS Pump and Reservoir Combo, Lumi PLUS LED Strip and so on.
  • CONVENIENT SATA POWER INPUT : Direct power from PSU ensures stability, reliability whilst preventing stray current.
  • Maximum rated current of the SATA port is 5A. If connected with Riing TRIO Fan : Up to 4 Riing Trio fans while adding other PLUS series products.
  • Up to 5 Ring Trio fans WITHOUT connecting other PLUS series products.
Check Stock

UMLIFE 2PCS Temperature Controller Module with Case, XH W1209 LED Display Digital Thermostat Module with Waterproof NTC Probe -50~110 Electronic Temperature Temp Control Module Switch

  • The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting..
  • Temperature Measurement Range: -50~110. Control Precision: 0.1 celsius.Input Power (DC): 12V.
  • Output: 1 Channel Relay Output, Capacity: 10A.
  • Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices..
  • The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature..
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or coolingNote: The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin. (It can protect the inside to prevent scratches.) And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.)..
Check Stock

7-30V 0-30A DC Current Detection Sensing Module Current Transformer Sensor Current Tester Indicator Overcurrent Protection Relay Module

  • This module can detect the DC current value, control the on-off of the relay according to the limit current set by users..
  • Detection range is DC 0-30A with the accuracy of 0.01A..
  • Can turn off the LED display to reduce power consumption..
  • Can be used to limit the current in the circuit, protect electrical equipment from damage caused by current..
Check Stock

DPST 1NO 1NC 8Amp Power Relay Module, Briidea 24V AC/DC Power Relay Control Voltage, White

  • INPUT CONTROL SIGNAL: Voltage AC or DC 24V, Current 17mA..
  • OUTPUT CURRENT: Output switch DPST 1NO 1NC(Double Pole Single Throw, 1 Normally Open and 1 Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
  • SIMPLE & PRACTICAL: This passive power relay module is simple and practical, which is very convenient to use. It can support both Normally Open and Normally Close..
  • EASY MOUNT: The power relay is of compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
  • LED INDICATION: This power relay has a led indicator for relay action indication. It is obvious to know the status of the switch at a glance..
Check Stock