Categories

Best Led Display Driver

HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3

  • 4-digit LED display module with LED brightness adjustable and clock point..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
  • The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Key Display for AVR 8-Bit Digital LED Tube 8-Bit TM1638 Module

  • DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
  • 4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
  • CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
  • COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
  • WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..
Check Stock

ALAMSCN LED Display Module TM1637 0.36'' 4-Digit 7 Segment 4 Bits Red Digital Tube for Arduino Driver Board (Pack of 4)

  • 4-digit LED display module, red highlights, with adjustable LED brightness and clock point, can display decimals, letters, etc..
  • The driver IC is TM1637, compatible with Arduino..
  • The digital display tube can be controlled with only two signal lines, simple and easy to use..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • 4 M2 screw holes, easy to install, locate and combine modules..
Check Stock

1/18 Scale Model Car Display Case - 1:18 Car Garage Display Case with Clear Acrylic Cover and LED Lighting for Die-Cast Cars, 1 Parking Route 66-Right

  • 【Realistic Garage Scene】The back panel, side panel , ceiling and floor are printed by UV laser. Clearly printed details help to create realistic scenes..
  • 【Lighted Display Case】The ceiling mounted LED light can light up entire display case. Package comes with LED driver and USB cable for the light..
  • 【Stackable and Combinable】The wooden structure is made of 10mm solid medium density fiberboard. Sturdy and good stability allows stacked display. The left and right side garage can be combined into a two parking garage..
  • 【Dimensions】This model car display case is designed for 1/18 scale die-cast car and can hold 1 car. Exterior size:14.2" X 8.9" X 7.1". Inner size: 13.2" X 7.1" X 6.3". Note: model car is not included in this display case..
  • 【Dustproof and Clear Acrylic Cover】We choose premium acrylic material in 95% transmittance to make the model car display case, in order to show your favorite scale cars more clearly while protect them from dust and corrosion..
Check Stock

Snapdragon Wireless_Headphones_Bluetooth_5.0_with_Charging_Box_Earphones_In_Ear_Stereo_With_Microphone_Sports_Waterproof_Headsets

  • 【Stereo sound quality】Earbuds' 8mm large-size speaker driver (the drive area is 1.77 times the normal drive area), strong bass (minimum 16Hz),....
  • 【Cool led display】The audifonos bluetooth LED display will clearly display the power of the charging box and earphones, allowing you to better....
  • 【Chip upgrade】Upgrade 5.0 Bluetooth chip, automatically power on and match when picked up. CVC 8.0 intelligent noise reduction, not affected by....
  • 【IPX8 waterproof】Earbuds and charging case inner Nano-coating makes it possible to waterproof for 1 meters deep for 30 minutes. Waterproof and....
  • 【After-sales service】 If you are not satisfied with our products, or if there is a problem with the product, you can choose to return it for 7....
Check Stock

AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino

  • 4 LED lights (LED indicator to know the importance of doing in the actual project, with this indicator can work directly with the program status indicators for easy debugging..
  • AITRIP 3pcs Multi-Function Shield ProtoShield Multi-Functional Expansion Board Sensor Shield Module with Four Digital Display Compatible with Arduino.
  • Four digital (using 74HC595 driver provincial IO learning SPI), you can do digital display test (can display temperature, voltage, counter value, etc.)..
  • Expansion board directly connected with LD3320 non-specific voice recognition module, you can achieve voice control..
  • Expansion board directly with the SG90, MG945 MG995 and other steering gear connected to achieve the robot and other complex actions..
  • Expansion board directly with the SYN6288 free voice module docking,it can achieve voice broadcast function..
Check Stock

Universal HUD 5.5in Head Up Display Speed Smart Gauge ODB2 System Car Accessories HUD Display Speedometer

  • [Ultra HD Display] The 5.5inch screen display helps you to clearly view important data. Give you the exact status of your car and be safer when you drive! Large 5.5inch color screen, very clear for the driver.
Check Stock

AUXITO Upgraded 9007/HB5 LED Bulbs Dual Hi/Lo Beam, 100W 20000LM 6000K White, Canbus Ready Wireless HB5 9007 LED Conversion Kit, Pack of 2

  • ...nect the plug, and you are done, you can start enjoying the amazing bright journey.
  • 99% Vehicles Compatible: Built-in intelligent IC driver and high wattage close to stock bulbs make 9007 bulb more compatible. Works well with 99% of vehicles’ systems. But for few vehicles, computer system may be sensitive and will display an error message or flicker for any aftermarket bulbs. To solve the issue, an additional decoder is needed, you can contact us through Amazon Buyer Message to get help and solutions.
Check Stock

AIBOO LED Under Cabinet lighting Kit, Plug in Strip Lights with Dimmer Switch for Kitchen Cabinet Counter, Closet, bedroom lighting.（24w-8 bars kit-6000K）

  • @DIMMABLE: led light bar has In-line switch on the LED driver cable helps turn on/off cabinet strip lights bar easily. The under cabinet lights could be dimmable from 0% to 100% as well, just rotate the LED dimmer switch achieve it..
  • @Mounted on anywhere: 12V dimmable LED light Bar could be attached on anywhere for the kitchen, closet, shelf or display counter lighting, no worry the outlet is in the center of the counter, the 2 in 1 splitter assist the cabinet light bar kit split into two..
  • @Premium Cabinet Light Fixture Kit: High quality certified adapter with US standard plug, licensed electrician can cut off the US plug and hardwire it to an ON/OFF switch. Furthermore the power adapter with 1.5m cable, it’s longer than others..
  • @Super Bright: 2000LM daylight white led light bar, the whole set around 24W power, as a replacement for traditional light, its CRI003e80 super bright, it’s a perfect choice for your home lighting at kitchen, closet, shelf, display counter, showcase..
  • @Installation by yourself: Sufficient strong acrylic stickers, screws, wire clips, 2 in 1 splitter with Interconnect wires total in 1.8m,long enough extension cords(15cm and 50cm)will help you finish this led under cabinet lighting bar kit quickly and easily..
Check Stock

LighTech LET-60 Electrical Transformer, 12V 60W Electronic

  • ◆The Model of LED Driver:Input: 90-265V AC 50-60HZ. Output: 24V DC 4.2A 100W.
  • ◆Automatic protection for Short circuit / overload / over voltage / over current / over temperature.Protection type: Hiccup mode, auto-recovery after fault condition is removed.
  • ◆Wide Range of LED Power Supply : Suitable for LED strip lights, led light bulbs ,Computer Project,Industrial,Outdoor Light and any 24V DC led lights.
  • ◆100% Waterproof IP67 protect for outdoor use.Aluminum metal housing, easy for heat dissipation and ensure stability.
  • ◆The LED driver is NOT dimmable, the LED driver is only compatible with RGB dimmers.LED transformer certification: IP67,CE,ROHS SELV etc.If you have any problem of our product, you can click “seller contact” button in your Amazon account to email us. we would be delighted to help you and reply you as soon as we can..
Check Stock

17inch Touchscreen Monitor, TFT LCD Monitor Touch Screen - 1280x1024 Resolution VGA Input for PC/POS Graphic Draw Sketching

  • [Great Performance] Display Size: 17 Inch, Backlight: LED, Display Resolution: 1280x1024, Brightness: 500cd/m2, Contrast: 700:1, Viewing Angle: 160 Degrees Horizontal, 160 Degrees Vertical, 4 Point Resistive Touchscreen Monitor..
  • [Touch Function] The touch screen comes with a driver CD, so you can use the touch function by simply downloading it. (If your computer does not have an optical drive, you can contact us for the online download address of the driver). Then just plug in the USB cable, you can use the touch function. Very convenient. It also comes with a free stylus, which is smooth to use and does not lag..
  • [Business Office Screen] The pos monitor touchscreen can be used as a business office screen, connected to your PC or used as part of a POS system. Ideal for offices, retail, restaurants, bars, gyms, warehouses, etc. Easy to use with just a few clicks of the hand, thus increasing work efficiency..
  • [Excellent Compatibility] With USB and VGA ports: USB port for touch, VGA port for display. Supported OS: Windows XP, Vista, Windows 7, Windows 10. Support Vesa wall mount 75x75mm..
  • [Best Service] PLEASE NOTE: If you encounter problems during use, you could contact us anytime with any problem, we will do our best to solve your problem. Excellent....
Check Stock

Litever Under Cabinet LED Lights Kit Dimmable by AC in-Wall Dimmer. Plug or Direct Wire LED Driver. Super Bright Linkable Lighting Strip for Kitchen Cabinets Counter. 35W 2000 Lumen. Warm White 3000K

  • 【Dimmable by AC Wall Dimmer】--The included LED driver is compatible with most branded in-wall AC dimmers. Smooth Dimming. Flickering-free lighting effects..
  • 【Super Bright】 --35W bright but soft warm white 3000K under cabinet light fixture. Very nice light color. No LED dots. No light glaring..
  • 【Plug in or Direct Wire】 --The LED driver is with a removable AC plug. It can be plugged into an outlet connected with your AC wall dimmer. You can also remove the AC plug for direct hardwiring it to your AC wall dimmer..
  • 【DIY & Extendable】---Following the “Recommended Layout”, add-on LED light bar, extra extension cables, 2-way power splitter can be added into this LED cabinet light system. It’s easy to DIY them to work as kitchen under cabinet lighting, above kitchen cabinet lighting, over counter task lighting, shelf lighting, workbench lights, laundry room/garage cabinet light or any other cabinet light..
  • 【Easy to Install】--Sufficient self-adhesive pads, mounting clips, wire clips, extension cords will help you to install this under cabinet led lighting kit quickly and easily..
  • 【Slim Design】--Slim LED driver. Slim LED light strip bars and extension cords. Easy to hide..
  • 【Reliable Dimmable LED Driver】 ---Premium Class 2 certified ....
Check Stock