Categories

Best Led Display Power Module

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

POWLAB SMD5050 Storefront Lights, 120Ft Store Window LED Lights 240Pcs 3 Led Module Light RGB Storefront Window Strip Light Super Bright Waterproof for Business Store Light Letter Advertising

  • Super Bright LED Module Light- The led storefront light uses 3pcs premium SMD5050 LED beads for each module, which offers stable & bright lights to your store front, shop, advertisements or advertising letter signs. There are 7 colors with the light: red, green, blue, purple, yellow,white, light blue..
  • Commercial LED Light- IP68 waterproof LED module lights with sticky Self-Adhesive tape on the back of each module, It is convenient for you to install with sticky self-adhesive tape on the back of each module. You can also hang them on anywhere you want with optional screw holes.DIY your own LOGO or Lighted Store Signs..
  • Store Decorative Light - Upgrade 5050 SMD module are brighter. With ABS plastic material, The Waterproof LED module lights can work normally when it rains or snows, and it will not cause a short circuit. But you should pay special attention to the positive and negative poles of the wire to avoid short circuit. Besides, the color of the plastic will not gradually become yellow after long-term using..
  • Energy-saving LED Light- The working voltage of this super bright LED light is DC 12V.
Check Stock

DC Converter 12V to 5V 3A 15W DC Buck Converter Module, DC to DC Reduced Voltage Regulator Car Power Converter Output Power Adapter, Wire Interface (1 Piece)

  • 12V to 5V USB converter: input voltage: 12V DC.
  • High conversion: DC to DC buck converter features integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: 12V to 5V DC converter adopts intelligent microprocessing chip, over voltage, over current, over temperature, short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is suitable for car LED display, GPS navigation, driving recorder, electronic dog, car radio, car audio, MP3/MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, driving recorder, LCD TV, LED, etc..
  • Warm prompt: the power of the device using this DC/DC converter 12V to 5V must be less than 15W, and this converter is not compatible with partial Samsung phones.
Check Stock

DROK® DC-DC Buck Converter 3.5-30V to 0.8-29V 10A Step-down Volt Adjustable Output Voltage Regulator Module Power Supply with High Accuracy Voltmeter Red Digital Tube Display

  • DROK DC buck converter input voltage range is DC 3.5~30V, output adjustable voltage range is DC 0.8~29V, max output current is 10A, conversion rate....
  • LED Voltage Meter: the step down regulator is equipped with high accuracy voltmeter, red LED display, press the key to switch display input voltage or....
  • Metal Case: DROK volt transformer is designed with metal case, can protect the module from destroying, and the case itself is a heat sink, excellent....
  • Note: please make sure that the input voltage is higher than the output voltage at least 1V.
  • please note that this module doesn't have reversed....
  • Small Size: the switching power supply module is with compact design, dimension is 85mm*58mm*33mm(L*W*H)..
Check Stock

4pcs Temperature Controller Module with Case W1209 12V DC Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch with Waterproof NTC Probe

  • 【W1209 Features】The W1209 thermostat module controller has a sensor input, keys, LED display, and a relay.100% complete machine patch, wave soldering, stable performance, good consistency..
  • 【Embedded CPU Chip】The XH-W1209 led display digital thermostat module embedded CPU chip (MCU), is more intelligent, lower power consumption.
  • Automatic power set memory, MCU built-in EEPROM memory unit..
  • 【Temperature Controller Parameter】Temperature range: -50-110°C.
  • Control precision: 0.1 celsius.Input power (DC): 12V.
  • Output: 1 channel relay output, capacity: 10A.
  • 【Waterproof NTC Probe】The NTC probe is waterproof and can control the temperature, allowing to control heating or cooling.(The wood laminate case is the clear plastic case. You need to tear the wood outside layer off carefully, the outside layer is very thin, which can protect the inside to prevent scratches.
  • And you need to assemble and install the case by yourself, it comes disassembled with tiny bolts and nuts.).
  • 【Package Includes】4pcs W1209 12V DC digital temperature controller board with case.(Ps: The product is not assembled, if you need assembly instructions or if ....
Check Stock

4-Digit 7-Segment LED Display Clock Module with TM1637 IC Compatible with Raspberry Pi Arduino (Blue LEDs)

  • [Specifications] This is a basic 4-digit 7-segment Led display clock module, the LEDs are blue..
  • [Compatibility] This clock module uses TM1637 IC, it compatible with Raspberry Pi and Arduino.
  • [Easy to Use] The clock module connected to digital I/O via 2 pins..
  • [Easy to Install] This LED display designed with 4 mounting holes for easy installation..
  • [High Quality] The clock module is made of high quality electronic components, stable and reliable performance.
Check Stock

DC Buck Converter, DROK DC to DC Step Down Power Supply Module 10V-65V to 0-60V 0-12A Adjustable Voltage Regulator Transformer Board with LED Display for Volt Reducer

  • ...t Voltage and Current】For DROK buck converter: Input voltage range is DC 10-65V.
  • Output voltage range is DC 0-60V, can be arbitrary adjustable and used to convert 24v to 12v 5v.
  • Output current range is 0-12A, can be arbitrary adjustable.
  • 【LED Display】This power supply module is designed with LED display, which can show real-time voltage, current, capacity and time..
  • 【Constant Current and Voltage with Indicator Lights】This volt transformer board can set constant output voltage and constant output current by the key buttons. Also, the module is equipped with working status indicator lights, which are output OUT, constant voltage CV and constant current CC respectively, so that the working status can be checked in real time..
  • 【Auto Output and Button Lock Mode】Automatic output can be set after power on. And The parameter adjustment button can be locked to prevent misoperation to adjust the output voltage and current parameters..
  • 【Cooling fan and cooling pad】This adjustable power supply converter is equipped with cooling fan and cooling pad w....
Check Stock

EAGWELL Module Lights, 100 FT LED Window Lights Waterproof Storefront Light Business Decorative Lights 12V 5050 RGB LED Lights for Advertising Signs Business Store Light with SM-4P Connectors

  • 【Enough Brightness】3 LEDs for each module light, which ensure the brightness of your store, advertisements or any other attractive signs. There are 7 colors with the light: red, green, blue, purple, yellow,white, light blue. which can be switched between these 7 colors through the remote control. All Accessories are included (10 strands of LED Lights 100 feet long in total, 2 Power Plug, 2 Remote controller)..
  • 【Easy to Use】Easy installation With Super Sticky Self-Adhesive tape on the back of each module, you can stick or hang on anywhere you like.There are sm-4p connectors on the end of each strand of LED module light. It will be much easier for you to connect the lights. Just plug. No need to male female connectors any more. Please pay special attention to the positive and negative poles of the connectors to avoid short circuit..
  • 【Energy-saving】High energy efficient 5050 SMD module 30 watt and 200 Lumen for each, provides extreme energy saving solution and brightness for your business. The led window module light is powered by a 12V DC power supply and is driven by a constant current, which greatly reduces the fluctuating power efficiency, low powe....
Check Stock

IRONWALLS Storefront Lights for Business, 120FT 240PCS 3 LED Module Light, SMD5050 Window LED Lights Strip, Multi-Colors Store Advertising Lights for Letter Sign Lighting, Car, Home Decor

  • ✨【Storefront Lights Super Bright for Business】Each LED module of IRONWALLS storefront lighting including 3pcs premium SMD5050 LED beads and the beam angle is up to 120°, which can offer enough brightness to your store front, shop, advertisements or advertising letter signs. Furthermore, there are 7 colors with the light and various modes optional, and all of these are effortlessly controlled by a wireless remote control..
  • ✨【Business Decorative Lights with Sufficient Length】This store window led lights set includes 20pcs x 12 strings per pack, totally 240pcs LED module, the overall length is 120ft/36.5m. Long enough to decorate your storefront window, countertop, advertising sign or anywhere you need attractive & eye-catching light. Besides, the LED module strip light can be cut to any length for your different needs..
  • ✨【Enough Power】Since only 1 set of the controller and power supply to connect too many modules will make your lights gradually darken, there are 3 sets of LED controller and power supply included in the package to ensure all the module has stable and same brightness for you. 12V DC input voltage, 60W per power supply. Consta....
Check Stock

12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3

  • 4-digit LED display module with LED brightness adjustable and clock point..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
  • The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
Check Stock

12v to 5v Converter Buck Module USB Output Power Adapter Dc Power Adapter Converter Direct Current to Direct Current Regulator Car Power Converter (1)

  • Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
  • USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
  • Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
  • Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
  • Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
Check Stock

LCD Touch Panels Touchpanel Analog For DOGXL160 (EA TOUCH160-1)

  • ♛ The Display Module is 5V compatible, use with 3.3V or 5V logic.
  • ♛ The Display Module can support analog S P I and hardware S P I.
  • ♛ The Display Module is designed with one socket for sd card.
  • ♛ With P C B plate (including power supply IC, SD), compatible with 5110 interface.
  • ♛ This is a new 2.8 inch serial S P I color display module without touch function.
Check Stock