Categories

Best Led Module For Ad

Logarithmic Amplifier Module ±0.4 DB RSSI Linearity ‑95 DBM Intercede, Sma Female Can Be Used As FSK PSK Demodulation

  • 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain..
  • APPLICATION - Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
  • Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
  • ±0.4 DB RSSI LINEARITY - ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
  • AD8309 AMPLIFIER MODULE - AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation..
Check Stock

Flashpoint XPLOR 600 HSS TTL Battery-Powered Monolight with Built-in R2 2.4GHz Radio Remote System - Bowens Mount (AD600 TTL) with R2 Pro Transmitter for Nikon

  • Godox AD600B TTL 2.4 GHz radio transmission (compatible with Canon E-TTL II, Nikon i-TTL, Sony, Olympus, Panasonic, and Fujifilm) Functions: Slave, off 5 groups, 32 channels.
  • Maximum Watt/Seconds 600 Ws, Guide Number 285' / 87 m at ISO 100 with AD-R6/R7 reflector,.
  • Recycle Time 0.01-2.5 sec, Flash Duration 1/220-1/10,000 sec, Color Temperature 5600K (±200K),.
  • Fully support High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync. Optical and Built-in 2.4G wireless transmission to offer stable output. 80M Wireless Control with precision. 11.1V/8700mAh large capacity lithium battery pack to provide 500 full power flashes and recycle in 0.01-2.5 second. DC/AC are both applicable(Change to AC alternating current module after lithium battery pack detached). 10W LED modeling lamp can adjust light brightness in three steps. Large.
  • INCLUDES: Flashpoint Godox Wistro AD600B TTL Battery Powered Monolight with Bowens Mount, Flashpoint/Godox X1Pro Transmitter, Battery Charger for AD600, Flash Tube, Lithium-ion Battery, AC Power Cord, Plastic Protective Cover, Custom Case, 2-Year Warranty.
Check Stock

Orange Amps Amplifier Part (FS1)

  • Get the most out of your Orange amp! The FS 1 single button footswitch from Orange gives you more control over these Orange amps: Terror Series: DT30 H TH Series: TH30H TH30C TH100H AD Series: AD30C AD30H Custom Shop: AD50 RETRO50 Crush PiX Guitar Amps: CR20LDX - Note: LED will not light CR35DLX Note: LED will not light The FS 1 single button footswitch from Orange gives you more control over these Orange amps: Terror Series:DT30 HTH Series:TH30HTH30CTH100HAD Series:AD30CAD30HCustom Shop:AD.
Check Stock

CJMCU-333 INA333 Human Micro Signal Multifunctional Three op amp Precision Instrumentation Amplifier

  • AD620 Instrumentation Amplifier Board Module Voltage Amplifier CNC MCP41010 Gain Adjustment Differential Signal Module.
Check Stock

NSLUMO LED Side Marker Lights for Chrysler 300 2015 2016 2017 2018 2019 Smoke Lens Amber Red Marker Lights Chrysler Led Side Marker Lamp Kit

  • ✅Function:To update your Chrysler 300 side marker with a new fashion style smoked lens front and rear led side marker light. Elevates your muscle car's aura and even adds additional safety and visibility..
  • ✅Compatibility: 2015 2016 2017 2018 2019 Chrysler 300 Front+Rear LED side marker for both of the driver/passenger sides. Replace OEM Part # 68213844AD, 68213845AD, 68214402AD, 68214403AD..
  • ✅Features: 45pcs high quality Amber LED chips in each of the front side markers.
  • 45pcs high quality Red LED chips in each of the rear side markers, altogether total 180 high power SMD LED diodes, brighter than the factory side markers..
  • ✅Installation: Easy to install, direct plug and play, perfectly replace factory parts, no modification needed.
  • this product features as a replacement and upgrade for your Chrysler 300's front and rear side marker lights..
  • ✅Package: 2pcs smoke lens Chrysler front led side markers+2pcs smoke lens Chrysler rear side markers, dot approved.
Check Stock

Fomito Godox PB960 Portable Extended Flash Power Battery Pack Kit Dual Output for Nikon SB910, SB900, SB800, SB28 Euro, SB28DX, for Godox TT685 AD360II AD360 AD180, for Smartphone Black

  • 5800mAh lithium battery, removable and replaceable battery module..
  • Dual outputs for powering two separate flashes without reducing recycle time..
  • Adding PB-NX cable for Nikon SB910, SB900, SB800, SB28 EURO, SB28DX, SB80DX and other flash model with same type of input power port..
  • Adding Y Power Cable DB02 for Godox AD360II AD360 AD180 with your Godox AD-S1 flash cable together..
  • Replacement as a backup battery pack, with USB port traded as powerbank charge for your phone..
Check Stock

Fomito Godox PB960 Portable Extended Flash Power Battery Pack Kit Dual Output for Canon 600EX, 580EX II, 550EX, 430EZ, for Godox Yongnuo Flashes, for TT685 AD360II AD360 AD180, for Mobile Phone

  • 5800mAh lithium battery, removable and replaceable battery module..
  • Dual outputs for powering two separate flashes without reducing recycle time..
  • Adding PB-CX cable for Canon 600EX, 580EX II, 580EX, 550EX, 540EZ, 430EZ and Godox TT685C/N/S/O/F, Yongnuo YN685 YN600EX-RTother flash model with same type of input power port..
  • Adding Y Power Cable DB02 for Godox AD360II AD360 AD180 with your Godox AD-S1 flash cable together...
  • Replacement as a backup battery pack, with USB port traded as powerbank charge for your phone..
Check Stock

WayinTop 2pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 2pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino

  • 【Perfect Combination】Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
  • 【Current Sensor Module】Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • The module can measure positive and negative current of 30 amperes, corresponding to analog output of 66mV/A..
  • 【Voltage Sensor Module】Voltage input range: DC0-25V.
  • DC input connector: Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for Arduino AD pins..
  • 【Package Included】2 x ACS712 Hall Effect Current Sensor Module + 2 x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
Check Stock

POWLAB SMD5050 Storefront Lights, 120Ft Store Window LED Lights 240Pcs 3 Led Module Light RGB Storefront Window Strip Light Super Bright Waterproof for Business Store Light Letter Advertising

  • Super Bright LED Module Light- The led storefront light uses 3pcs premium SMD5050 LED beads for each module, which offers stable & bright lights to your store front, shop, advertisements or advertising letter signs. There are 7 colors with the light: red, green, blue, purple, yellow,white, light blue..
  • Commercial LED Light- IP68 waterproof LED module lights with sticky Self-Adhesive tape on the back of each module, It is convenient for you to install with sticky self-adhesive tape on the back of each module. You can also hang them on anywhere you want with optional screw holes.DIY your own LOGO or Lighted Store Signs..
  • Store Decorative Light - Upgrade 5050 SMD module are brighter. With ABS plastic material, The Waterproof LED module lights can work normally when it rains or snows, and it will not cause a short circuit. But you should pay special attention to the positive and negative poles of the wire to avoid short circuit. Besides, the color of the plastic will not gradually become yellow after long-term using..
  • Energy-saving LED Light- The working voltage of this super bright LED light is DC 12V.
Check Stock

iJDMTOY 5pc Set Smoked Lens Cab Roof Marker Lights W/Amber LED Bulbs, Remote Strobe Flash Blink Module Box & Controller, Compatible With Ford F250 F350, Dodge/RAM, Chevy/GMC Trucks

  • 5 pieces black smoked lens cab roof lamps (each lamp size 4" x 3" x 2").
  • DOT SAE approved and replace Part # 11516638, 15599040, 15691885, 8C34-15442-CB, 8C34-15442-AD.
  • Come with amber yellow LED bulbs inside (LED bulbs are replaceable) and Wireless remote control strobe/flashing module box (check out the YouTube video SEARCH "iT1prNragfM").
  • Replacement for trucks' OEM amber lens cab roof lamps or a fresh new add-on for your truck (note: for the fresh new add-on installation, it will require some drilling. Also the cab roof lamp has a flat bottom, if your vehicle's roof is very curvy, it might not fit properly).
Check Stock

D-Lumina LED Side Marker Light Kits for Chrysler 300 2015 2016 2017 2018 2019 2020 2021 2022, 2-Row Full LED Strip Amber & Red Front Rear Bumper OEM Sidemarker Lamp Replacement, Smoked Lens 4 Pieces

  • Fitment List: Compatible with 2015 2016 2017 2018 2019 2020 2021 2022 Chrysler 300, OEM Part # 68213844AD, 68213845AD, 68214402AD, 68214403AD.
  • High Intensity LED Chips: Built with 100% advanced high brightness LED chips. With bright lighting output and low power consumption, D-Lumina Chrysler 300 LED Side Marker Lights are 5X brighter than OEM light bulbs. Perfect upgrade replacement part for the old or defective stock bumper side lights..
  • Excellent Side Marker Performance: Powered by high power 60SMD LED chips, 2-row full led forming a perfect focal strip with a ultra bright lighting output can enhance the visibility and safety even at night. Smoked lens upgrade your vehicle a modern and unique appearance..
  • Easy Installation & IP67 Waterproof: Easy to install, direct plug and play, no modification needed. Perfect replacement for the stock front and rear led side marker..
  • Package & Warranty: 2pcs smoked front bumper side markers & 2pcs smoked rear bumper side markers included. We offer 1 year warranty. If you have any question, please feel free to contact us for help..
Check Stock

Godox AD-B2 Dual Tubes Light Head S-Type Bowens Mount Flash Twin Head Bracket to Install 2 Godox AD200 AD200Pro Pocket Flashes or Flashpoint eVOLV 200 Speedlight Together to Achieve 400W Power Output

  • Install Two Godox AD200 ,AD200Pro or Flashpoint eVOLV 200 Pocket Flashes Together to Ahieve 400W Power Output Offers High Quality Lighting and Ideal Light Source..
  • Install the AD-B2 on the Light Stand,Adjust the Mounting Bracket and Tighten the Direction Adjusting Handle for Shooting..
  • Godox AD-B2 combine two Godox AD200,AD200Pro or Flashpoint eVOLV 200 strobes into a single 400Ws light source, with Bowens S-type mount, and dual unobstructed LED modelling lights.
  • The AD-B2 has a light stand receiver with a tilt lock that is ready to attach to any 5/8" stud or light support.
  • You don't need two flashes to take advantage of the 2X200w LED modeling feature. Just one pocket flash will power the lamp with one barebulb inserted..
Check Stock

16mA Logarithmic Amplifier Module 100 DB Amplifier Board 5MHZ‑500MHZ SMA Detector Module for FSK PSK Demodulation Signal Reception

  • Logarithmic Amplifier Module: Logarithmic output of the logarithmic amplifier module is proportional to the logarithm of the input signal..
  • RSSI Linearity: ±0.4 dB RSSI linearity, RSSI scale does not change with temperature and feed voltage..
  • Apply to: Used for received signal strength indicator (RSSI) and phase detection in cellular base stations, radar and other radio transceiver applications..
  • Specific Parameters: 16mA current, 20 mV/dB slope, ‑95 dBm intercede, SMA female, 5MHZ‑500MHZ frequency range, 100 dB gain. Dynamic Range: 100 dB -78 dBm to +22 dBm (Re 50 O). Total Gain: 100 dB. Bandwidth: 500 MHz. Sleep Current: 003c1mA..
  • Founction: AD8309 amplifier module, with limiting output, can be used as FSK PSK demodulation. Input and Output Interface: SMA Female..
Check Stock