Categories

Best Led Power

vidaXL Christmas Inflatable Snowman with LEDs Home Garden Patio Holiday Xmas Seasonal Ornament Inflatable Party Blow up Decoration Toy Figure

  • Model No : 345328.vidaXL Christmas Inflatable Santa and Reindeer Decoration LED 57.1".Color: Multicolor.Material: Oxford fabric (100% polyester) with a PU coating.Dimensions: 112.2" x 30.3" x 57.1" (L x W x H).Input voltage: 100-240 V ~.Output voltage: 12 V.Power: 15 W.Adapter IP rating: IP 44.Power cord length: 16.4'.Power source: Plug.LED light strip length: 21.7'.Inflates and deflates quickly.1 x Body.1 x Ad.
  • Color: Multicolor.Material: Oxford fabric (100% polyester) with a PU coating..
  • Dimensions: 112.2" x 30.3" x 57.1" (L x W x H).Input voltage: 100-240 V ~.Output voltage: 12 V.Power: 15 W.Adapter IP rating: IP 44.Power cord length: 16.4'.Power source: Plug.LED light strip length: 21.7'.Inflates and deflates quickly.1 x Body.1 x Adapter with US plug.1 x Built-in fan.1 x LED light strip.6 x Earth stake.2 x Rope.UPC : 8720287157144.Input voltage: 100-240 V ~.Output voltage: 12 V..
  • Power cord length: 16.4'.Power source: Plug.LED light strip length: 21.7'.Inflates and deflates quickly.1 x Body.1 x Adapter with US plug.1 x Built-in fan..
Check Stock

Trintec 24 Hour Square Military Time SWL Zulu Time 24Hr Black Wall Clock 10\ Dial Ham Shack 24H-10

  • ...ay. This LED clock is an ideal gift for everyone..
  • Easy to read: The bedroom digital alarm clock has large LED numbers, and the display brightness can be easily adjusted according to personal preferences. Support 12-hour and 24-hour time display. To maintain time and avoid setting all parameters after unplugging the power cord, please install a battery..
  • Alarm and snooze: Long press "Alarm" to set the alarm time and snooze time. Use "up" and "down" to adjust the hours and minutes. The snooze time ranges from 1 minute to 60 minutes each time, 3 times in total..
  • Adjustable brightness: If you find that the LED is too bright at night, you can use the "UP" button to adjust it to a low level, long press the light button to turn off the LED, or unplug the power cord to let the clock work in power saving mode..
  • Two power sources: When only 3 AAA batteries (not included in the scope of supply) are used for power supply, the clock will automatically be in power saving mode. When the energy-saving mode is turned on, the LED will automatically turn off for 15 seconds after the last operation, and it can be awakened by lightly tapping, clicking, or tapping. If you want the LED to stay on, please plug in the power cord (included) and use a 5V/1A USB adapter (not ....
Check Stock

Othmro LED Chip Bulb Lamp 3W 9-10V Cob LED Chip Light, 50mm Length for Replacing The Light Source Super Bright High Power or Floodlight Bright Light 1pcs

  • 【Material】-This LED Chip Bulb is made of high quality Auminum board, durable for daily use,low heat generating.
  • 【Advantage】-The LED light Panel has low consumption,high brightness,high Power LED,saving power,very low heat generating.
  • 【Wide Application】-This Aluminum Base Plate Panel is widely used in the replacement of LED downlights, track lights, flooAdlights, flashlights, stage lights.
  • 【Note】-The LED lamp board must be powered by constant current LED driving power supply, and the output parameters of the power supply are consistent with those of the lamp board.
  • The LED lamp plate must be installed on the aluminum radiator,otherwise the lamp plate is easy to burn out at high temperature.
Check Stock

LED Desk Lamp Eye-Caring Clamp Light Clamp Lamps Reading Lights with USB Port, 360°Flexible Gooseneck Bed Night Light by DWEPTU (Include AC Power Plug)

  • 【Eye-caring LED Desk Lamp】Eye-caring LED Desk Lamp adopts DC drive technology, and the non-flicker LED desk lamp is more healthy and protects your eyes. It is safe for children to use and better protects children's eyes..
  • 【USB POWER SUPPLY】Include AC Power Plug.
  • The USB power supply interface is easy to use and can be used anytime and anywhere. All power supplies with a USB interface can be used, such as mobile phone charging heads, computers, and power banks. Is studying, office, bedroom, university dormitory, essential LED lamp, etc..
  • 【ENERGY SAVING】LED under cabinet lighting with High-brightness LEDs are 80% more power-saving than fluorescent tubes, so you don’t need to spend too much electricity and can meet the daily needs of lighting.
  • the life of LED lamp beads can reach 100,000 hours, so a MINI table lamp can be used for many years, and it is never used Buy a new lamp for the burnt out lamp..
  • 【Adjustable Design】Freedom to cast the perfect spotlight, 360°Flexible Gooseneck. It is easy to use and can be used wherever you want..
  • 【Complete packaging accessories】Include AC power plug.
  • LED Desk Lamp provides free lifetime warranty. If there is any problem, we will respond and solve it within 24 hours Program..
Check Stock

Jensen ACDC1911 AC/DC Converter, Black

  • Compatible with TV models JTV19DC JTV1917DVDC JTV24DC.
  • Unofficially it also Compatible with JE1912 JE2212 JE2412 JE2612 JE1911 JE1909DVDC JE1512LED JE1912LED JE2212LED JE2412LED JE2612LED JE1090 JE1914DVDC JTV2815DC FPE1909DVDC.
  • Attached AC power plug cable is 62-64 inches long plus the AC power plug length.
  • Attached DC cable is 52-54 inches long plus the DC coaxial plug length.
Check Stock

(2) JBL Pro PRX825W Dual 15 3000w 2-Way Powered Speakers w/ WIFI + Mobile App

  • Specifications: JBI Pro PRX825W Dual 15 1500 Watt 2-Way Powered Speaker with WiFi + Mobile App. System Type: Self Powered Dual 15 Two-Way, Bass- Reflex Speaker. Power Rating: 1500W (750W x 2). Maximum SPL Output: 138 dB peak. Frequency Range (-10 dB): 42 Hz – 18.5 kHz. Frequency Response (3 dB): 49 Hz 17 kHz. Input Connectors: (2) Balanced XLR / 1/4 inch input, (2) Unbalanced RCA Input.
  • Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced). Signal Indicators: Limit – Yellow LED indicates peak output has been reached and DSP Limiter is acting Signal – Green LED indicates signal present Power – Blue LED indicates system has power and ready to pass audio. Limit – Yellow LED indicates peak output has been reached and DSP Limiter is acting.
  • Signal – Green LED indicates signal present. Power – Blue LED indicates system has power and ready to pass audio. EQ: User selectable presets for Normal or Boost, Advanced EQ settings available using Wi-Fi and PRX Connect application. Dynamic Control (Input): DBX Type IV limiter circuit. System Low Pass: 80 Hz DSP. Crossover Frequency: 2.4 kHz. Design: Highly Efficient Class-D Amplifier.
  • AC Power Input: 100V – 240V ~ 50/60 Hz. LF Driver: 1 x JBI 2275H 15 in woofer. HF Driver: 1 x JBI 2408H-2 37.5 mm ....
Check Stock

uxcell 300mA 3W LED Chip Bulb Surface Mounted Devices Light Beads Warm White Super Bright High Power or Floodlight 4pcs

  • High Power LED, saving power,very low heat generating..
  • Note: The LED lamp board must be powered by constant current LED driving power supply, and the output parameters of the power supply are consistent....
Check Stock

NC 6.3 inches Multifunctional Voice-Activated Luminous Mute Electronic Alarm Clock, LED Temperature Display, Smart Clock with Light, Creative Mirror (White Number)

  • ...ay. This LED clock is an ideal gift for everyone..
  • Easy to read: The bedroom digital alarm clock has large LED numbers, and the display brightness can be easily adjusted according to personal preferences. Support 12-hour and 24-hour time display. To maintain time and avoid setting all parameters after unplugging the power cord, please install a battery..
  • Alarm and snooze: Long press "Alarm" to set the alarm time and snooze time. Use "up" and "down" to adjust the hours and minutes. The snooze time ranges from 1 minute to 60 minutes each time, 3 times in total..
  • Adjustable brightness: If you find that the LED is too bright at night, you can use the "UP" button to adjust it to a low level, long press the light button to turn off the LED, or unplug the power cord to let the clock work in power saving mode..
  • Two power sources: When only 3 AAA batteries (not included in the scope of supply) are used for power supply, the clock will automatically be in power saving mode. When the energy-saving mode is turned on, the LED will automatically turn off for 15 seconds after the last operation, and it can be awakened by lightly tapping, clicking, or tapping. If you want the LED to stay on, please plug in the power cord (included) and use a 5V/1A USB adapter (not ....
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • Note: If you use UPS to power Raspberry Pi3b/3B+ while charging, please make sure that the input power is not less than 2.5A. Recommended use: 3V 2.5A power supply★ The document link is obtained in the product description.
  • The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
  • The UPS has overcharge and overcurrent protection functions: When the UPS e....
Check Stock

MECCANIXITY T8 U Clips, LED Fluorescent Tube Holder Mounting Bracket Accessories Pack of 10

  • Connects 8mm wide white LED tape lighting required two wire connections, not for RGB LED tape lighting.
  • SureLock Wire Lead Connectors include 8 inch power lead between two connectors and are perfect for extending LED strips around corners or, when cut in half, to create two power leads for linking and extending 12-volt power wires to LED tape lighting in another area.
  • Splice Connectors join two white LED tape light strips to create a continuous run of LED lighting.
  • Easy to use, no soldering, snap-tight secure connections.
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 4000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • Support charge while discharge: It will not affect the output of UPS power supply when external power outage. Note: If you use UPS to supply power for Raspberry Pi3b/3B+ when it is charging, please ensure that the input power is not lower than 2.5A. Recommended Use: 3V 2.5A power supply. ★Document link and Assemble video: Please get the link from the product description below.
  • Two power modes: Outdoor portable model and Indoor UPS power Supply mode: 1) As an outdoor portable power supply, the motherboard is powered by a lithium battery. and he maximum external power supply capacity is: 5.1V. 2.5A. 2)As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V 2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1V.3A. Battery size: 70mm x 41mm x 9.5mm.
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Char....
Check Stock

DNA Motoring LEPOW-010 Aluminum Battery Box Relocation Kit 13.5\W x 9.5\D x 10\H

  • ... normally even if it is affected by vibration, various bad weather and other factors. At the same time, the isolator supports waterproof function, and the waterproof grade is IP67. (Only suitable for lead-acid battery to lead-acid battery or lithium battery to lithium battery).
  • 【Manual Modes】 Press and hold the "Power" button for 3 seconds, the upper blue (LED) indicator light is on, and the manual mode is turned on. In this mode, click the "Power" button to turn on/off the isolator. Click the "power" button, the lower red (LED) indicator light is on, and the isolator is turned on.
  • click the "power" button again, the lower red (LED) indicator light is off, and the isolator closure..
  • 【Automatic Mode】Long press the "Power" button for 3 seconds, the upper blue (LED) indicator light goes out, and the automatic mode is turned on. In automatic mode, the voltage-sensitive relay (VSR) cuts in at 13.3 volts, and the lower red (LED) indicator lights up. The voltage-sensitive relay (VSR) is cut off at 12.8 volts, and the lower red (LED) indicator light turns off.
  • 【LED SCREEN REAL-TIME VOLTAGE DISPLAY】 The surface of the isolator is equipped with an LED display to display the current-voltage status in real-time, allowing you to control the battery statu....
Check Stock

2 pcs black 4 Pins LED Splitter Cable LED Strip Connector 4 Way Splitter Y Splitter for One to four RGB 5050 3528 LED Light Strips with 10x Male 4 Pin Plugs -30cm/12inch Long

  • 1 to 4 female connection cable For - 5050/3528 RGB LED Extension Cable is designed for 10mm width LED strips.
  • 1 end to connect with LED RGB controller, the other ends for 4 Reel LED RGB strips.
  • This DC Power Adapter Cable splits 1 power signal into 4, enables you to connect 4color changing RGB LED strips to a single controller.
  • Power supply with sufficient amperage for 4 strips is required.
  • Package Content: 2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on the 4 pins, perfect conductivity)DescriptionDesign: 1 to 4 Splitter Cable Connect four color changing RGB 5050/3528 LED strips to a single controller with this 4 pin splitter cable. No soldering is required, simply match the arrows on the plug. Features: 1). The insulation plastic of this cord adopts high quality PVC, anticorrosive. 2). This extension cord contains 4 strands of pure copper wires inside, which ensures flexibility, durability, and perfect electric conductivity. 3). The cord and the 4pin plugs fit snug. 4). Easy to plug, reliable connection, excellent performance. Just buy with confidence! Note: A power supply with sufficient power for multiple led strips is required. Package Includes:2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on....
Check Stock