Categories

Best Led Surface Light Fittings 2

GeilSpace 6 Pack 1/2\ × 16\ Pre-Cut Black Metal Pipe, Industrial Steel Fits Standard Half Inch Black Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (1/2\ × 16\

  • SIZE - 1/2" Steel Pipe, 16 Inches (40.6cm) long, set of 6. LIGHTWEIGHT pipes, used for HOME DECOR. Compatible with NPT 1/2" fittings..
  • NOTE - These pipes are PAINTED BLACK, if protective painting at both ends makes pipes hard to screw into fittings, please remove the black painting. (Use knife to cut along thread) The pipe does NOT work with pipe clamps. O.D. of these pipes is smaller than the NPT 1/2" pipes. (O.D. of these pipes: 20.2mm.
  • MATERIAL & PRODUCTS - GeilSpace Pipes are designed with a standard industrial finish.
  • materials and threads constructed from sturdy metal.
  • Unlike most other products on Amazon with grey looking and oily surface, surface of these product series is clean and PAINTED black, which provides better user experience and looking. Our product’s surface is rust-proof when the protective paint layer is intact..
  • HOW TO USE - Unleash Your Creativity and bring chic, industrial style into your home, office，garage, workshop or any other space with GeilSpace fittings and pipes.
  • choose from our large selection of standard, unique and innovative fittings and pipes to create custom furnishings limited only by your imagination..
  • MORE CHOICES - Please find more fittings and pipes from our store, we o....
Check Stock

Bimini Top 3-Bow/4-Bow Stainless Steel Boat Jaw Slide Cap Eye End Deck Hinge Fittings Hardware 16 Set 1 Inch

  • 4 BOW and 1'', Round Tube Bimini Top Kit with Stainless Steel Fittings.
  • 8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings.
  • Package : 16 Pieces in 1 Set, (WHAT YOU GET:8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings).
Check Stock

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

  • ...up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
  • ✅MATERIAL: Accessory Wires is 100% Copper Wires.
  • License Plate Bracket made from Polypropylene Plastic.
  • Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
  • and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
  • ✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standards.
  • ✅BRIGHTNESS: We improved these trailer lights, compared with the old vision, these trailer lights are brighter. Brighter lights are safer in any environment such as Sand, Water, Dirty, Snow and Dusty Place..
Check Stock

Partsam 4x Waterproof Amber/Red 4LED Side Marker Light for Trailer Truck Boat DC12V - Slim Waist

  • Sealed, Long LED Trailer Clearance and Side Marker Light, 4-Diode - Amber/Red.
  • This thin-line, sealed, rectangular LED light can be used as a clearance or side marker light.
  • The two-wire design includes the lead and ground wires to mount to any surface..
  • Hole to Hole Size:2.2" Note: NOT the TWO PRONG type, these are hardwired into the vehicle(Black is negative and Red positive).
Check Stock

Partsam 20Pcs 2\ x 4\ Double Bullseye Led Marker Lights 10 diodes Surface Mount Sealed Rectangle Rectangular Led Trailer Marker Clearance Lights Waterproof 12V

  • Package includes 20 Pieces double bullseye led marker lights (10 Amber lights + 10 Red lights). Each trailer marker light includes 2 pieces stainless steel screws for surface mounting.
  • Each led markers boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamp, sonically sealed polycarbonate lens and weatherproof housing.
  • About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1".
  • The rectangular led light features a replaceable, snap-on lens. The white base surface mounts on standard 3" centers, and the two-wire design includes the lead and ground wires to mount to any surface: black is ground and red is positive.
  • This double bullseye LED light can be used as a clearance or marker light.
  • These LED marker lights have the "double bullseye" design just like the marker / clearance lights on Airstreams from 1969 and many later models.
  • These trailer lights go by a few different names - tiger eye led lights and double bubble led lights are the most common ones that we hear. This is a nice-sized side marker light for anywhere on the truck.
  • Different form many bullseye lights selling on the market, The wires do not exit from the middle but form the corner.
  • These 12V rectangle LED lights are univer....
Check Stock

Partsam 6Pcs Mini Oval 2.5 Inch LED Light 2 Diode Clear Lens Amber Universal Mount Side Marker Trailer Lights, Sealed Mini oval led side fender lights Trailer Truck Surface Mount Waterproof

  • Partsam 6Pcs 12v DC clear lens Amber Side Marker trailer Light Mini-Sealed LED Surface mount design.
  • 2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer. 2-Wire design. Screws are not included.
  • These Mini Led Trailer Lights are universal. Generally people use them as clearance, side marker or identification light. We also get feedbacks from our customers using them as strobe lights by connect with the switch or relay. Also some put them on motorhome as position lights, or install them in the truck step running boards as side markers etc..
  • Size and Brightness: 2.54" x 1.06" x 0.7" and the center to center hole distance: 1.8".
  • 80 lumen each light with 2 pcs High Quality LED Diodes. So if you use it as turn signals by connecting a on/off switch, but it may not be that bright.
  • These surface mount lights have 2 holes one in each. Because of the placement of the leads and how the lamp is mounted, You will need to drill holes for the screws AND for the wire leads to surface. The screw actually hold both the backing and the lens cover on, making it sealed and watertight. Also If you install them vertically they are more visible than if you install them hori....
Check Stock

Partsam 4x Oval White Clear Lens 2 Diode LED Trailer Truck Clearance Side Marker Light, Surface Mount 2.5" Little Boat Marine Led Lights RV Camper Accessories

  • Package includes 4pcs 2.5" oval led marker lights white, Sealed, waterproof housing and lens unit, other accessories are not included.
  • Each light includes 2 LED diodes and LED bulbs draw such little amperage that it is possible to run these lights off any other circuit without blowing fuses or overheating wires. They measure 2.5" from side to side and 1.0" wide. Also this 2.5 inch oval marker light is about 0.7" tall,Hole distance 1.8".
  • This mini oval clearance light is hardwired with two bare end wires, not a diming light(on/off switch not included): Black is ground and Red is positive(hot).
  • functions: side marker light, clearance lights, identification lights, or auxilary backup light etc.
  • This oval marker light mounts to a flat surface needing only the 2 screws(not included) to penetrate the mounting surface. They can be used virtually anywhere you need light and can connect to 12v power.
  • Note: These oval led lights are generally waterproof, please do not use it under water, thanks.
  • Warranty: We truly offer 1 year warranty! If have any questions or issues about our mini oval led lights, Please feel free to us and we will reply in 24 hours.
Check Stock

The Woodburner Handbook

  • Whole home indoor, gas powered tankless water heater, rated at 4 GPM that activates only on demand and no pilot light needed, reducing energy....
  • Sleek, modern design with black tempered glass front panel featuring an easy to use LED display controls.
  • Features fully automatic temperature controls with an energy saving mode and child lock technology.
  • Plugs into standard 110v electrical outlet with UL-listed cord.
  • Uses standard 1/2" NPT water fittings and comes with horizontal venting allowing for a convenient and quick installation.
Check Stock

LED Black Light Night Fishing LED Strip UV Ultraviolet Boat bass Fishing 12v dc Pontoon Kayak John Boat Florescent line Glow (16ft)

  • ...rightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please test the lights before stick to surface, Please check polarity before wiring..
  • ✅【Widely Application】: The lights are widely used for boat interior light, cockpit light, deck light, transom light, step light, cabin light, courtesy light, navigation light, stern light, side light, accent atmosphere light, etc..
Check Stock

Restful Bedtime Bulb Low-Blue Light Bulb for Healthy Sleep and Baby

  • Super bright and energy-efficiency: 2W led Shaped filament Led bulbs equals to 15W incandescent bulb, with 200LM high brightness. It can save your 90% cost on your month electric bill..
  • Unique Design: Vintage Antique Light Bulbs with A19 shape, fits standard (Medium) base E26 light fittings and E26 base 110v-130v non-dimmable light bulb..
  • Great Functions: Output of 200 lumens at 2700K warm white, perfect in the evening to set your favorite mood. The bulb give off milder light and better protect your kids and family’s eyes..
  • Inspiring Shape: Beautiful teardrop-shaped led lamp beads looks like a tree, warming up your life and bringing you a peaceful moment..
  • Long Life: Average 30,000 hours lifespan. If there is any questions, please contact us without hesitation..
Check Stock

This Is Not a Maze: Hidden Objects Color Search

  • Package includes 2 Pieces 2x6 inch Amber Rectangular Trailer Marker Led Lights 3 Wires Surface Mount, 21 Led diodes per amber light.
  • Sealed amber led Light, 3 Wires Setup, High Low Function. Other accessories are not included.
  • Compared with those similar side marker lights on market which can be used as led marker light only, this 6 inch rectangle LED lamp is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These are a really popular style thanks to their multi-faceted design.
  • Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8". Dim Function draws 20 mA & Bright Function draws 110 mA approx.. This trailer clearance light is unversal for almost all 12V vehicles as well as the size fits.
  • This amber marker lights is HARDWIRED with 3 wires: Black is ground, white is low brightness as marker lights, clearance lights or running lights, red is high brightness as turn signal lights.
  • Commonly known as a trailer light, these 2" x 6" rectangular trailer lights can really be installed anywhere you'd like to surface mount them. It is going to fit perfectly on....
Check Stock

Motorcycle underglow LED Light Kit, RGB Motorcycle LED Strip Lights with Music Mode, Multicolor Brake Light Function Waterproof Motorcycle Underlight Accessories

  • ...nal for Safety, when you hit the brakes, the whole LED kit turns red, give warning signals to other vehicles and reduce traffic accidents..
  • 【Easy Installation】universal fit motorcycle led light strip with strong adhesive can be easily peeled off and pasted on any slick surface,zip ties, it holds it on place firmly definitely. step 1: power on to check light.
  • step 3:peel off tape cover and stick it to the car.
Check Stock

Global Meltdown

  • ...e of guns and weapons. Also you will get the unlock state, battery level & time in real-time, you can set your time. Get the clear reading on the LCD display..
  • Sturdy & Security: The handgun safe is made of solid steel and a pry-resistant door for strength, with a reliable high-strength locking mechanism and precise fittings. The heavily built case is solid and sturdy and comes with a 40.16" steel security cable that allows you to connect the gun safe anywhere. 2 Screws help fix the safe on the table or in the drawer. It is great for secure your firearms from kids and smash/grab type home robberies..
  • Easy to Set Up & 3 Ways to Open: With the smart biometric fingerprint, passcode keypad, and emergency key. It is easy to program the full 10 digit numeric keypad and your fingerprint. The fingerprint access allows for reaching your firearms within 1s, which can save you more time when you're in danger. The biometric gun safe for handgun can hold up to 100 fingerprints, large size fingerprint scanner can read your stored fingerprint from any angle that finger is placed on the surface..
  • LED Light & Silent Mode: The internal LED automatically turns on when the lid opens. No fumbling around in the dark, it stays on for about 10 seconds. The biometric safe ....
Check Stock