Categories

Best Left hand Tap And Drill

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

ATOPLEE 1pc Metric HSS 6542 Left Hand Thread Tap (M16x2.0)

  • {High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
  • {Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
  • {Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
  • {Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
  • {Package Included} 1x Left hand Thread Tap.
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

Drill America 5/8'-18 Tap and 37/64' Drill Bit Kit, POU Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 5/8"-18 hss plug tap and matching 37/64" hss 1/2" shank drill bit in plastic pouch.
Check Stock

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/3....
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool

  • Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
  • Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stock

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

  • DIMENSIONS - 5pcs HSS left hand drill bits and 5 alloy steel bolt extractor. Screw extractors include 1#, 2#, 3#, 4#, 5#. Left hand drill models include 1/8", 5/32", 3/16", 1/4", 19/64".With a portable storage case that provides excellent protection and against lost screw extractors..
  • APPLICATION - Damaged Screw Extractor Set Designed to remove broken screws, studs, bolts and other fittings effectively..
  • MATERIAL - Made of durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance..
  • FEATURES - Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.A musthave tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
  • HOW TO USE - A broken bolt or screw may be removed from a hole wi....
Check Stock

Drill America - D/ACO44P12 #44 Cobalt Heavy Duty Drill Bit (Pack of 12), D/ACO Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • 4-36 hss plug tap and matching #44 hss drill bit in plastic pouch.
Check Stock

BOSCH BDT1032 10-32 Plug Tap and No 21 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT632 6-32 Plug Tap and No 36 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

BOSCH BDT1024 10-24 Plug Tap and No. 25 Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

Drill America - POUM12X1.25 m12 x 1.25 Tap and 10.75mm Drill Bit Kit, POU Series

  • Set contains high speed steel plug hand tap and matching high speed steel drill bit.
  • High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
  • Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
  • M12 x 1.25 hss plug tap and matching 10.75Mm hss drill bit in plastic pouch.
Check Stock