Categories

Best Left hand Thread Screws

ABN Jumbo Spiral Flute Extractor – 9 Piece Easy Out Bolt Screw Extractor Set Square Shank Reverse Bit Set With Wood Case

  • [Fix Damages]: Remove broken screws, bolts, and studs with the ABN Reverse Drill Bit Extractor Set.
  • Assorted 9-piece set allows you to choose a spiral bit to fit a drill or socket wrench for your application needs.
  • [Use Again and Again]: Heat treated spiral extractor bits resist rust and corrosion.
  • High carbon steel coating is built for long-lasting durability.
  • [Rotate Left]: Spiral flute reverse thread design prevents slips.
  • Using reverse rotation, the left-handed easy out spiral extractors grip tightly to damaged bolts.
  • Rotate to the left to tighten and right to loosen.
  • [Store Your Bits]: Broken bolt extractor bits are stored in a 10.6 x 6 x 1.7-inch case (27 x 15 x 4cm).
  • Lightweight wooden case includes bit sizes on the lid.
  • Pluck foam protects the thread bolt remover flutes.
  • [Pick Your Size]: #1 to #9 jumbo screw extractor and drill sizes of 5/64, 7/64, 5/32, 1/4, 17/64, 13/32, 17/32, 13/16, 1-1/16 inches.
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Drill Hog® 15 Pc Left Handed Drill Bit Set Screw Extractor EZ-OUT HI-Molybdenum M7

  • Left Hand Thread for Removing Broken Bolts, Screws, and Studs.
  • 135 Degree Split Point Prevents "Walking".
Check Stock

SHARROW 5pcs Archery Recurve Bow Sight Pin Hunting Bow Sight Accessories Single Pin Sights Archery Accessories

  • Great for beginner's sight pin replacement,fit for left and right handed shooter..
  • Robust and has standard thread to fit all recurve bow sight..
  • Increase shooting accuracy and experience the joy of archery..
  • The sight pin attaches to the mounting bracket via a steel screw that easily screws on to the bracket..
  • Package include:5pcs archery recurve bow sight pin..
Check Stock

Air Conditioner Exhaust Hose with 5 Inches Diameter, Counterclockwise Thread Compatible with Portable Air Conditioner (59 Inches Length)

  • COMPATIBILITY: this air conditioner hose is compatible with portable air conditioner, replaces the original hose with 5 inch diameter and counterclockwise thread.
  • STRETCH AND SHRINK FREELY: the hose is extendable, the shortened length is 12.6 inch/ 32 cm, it can extend up to 59 inch/ 150 cm, easily extend the length of the exhaust hose to fit into anywhere you want.
  • DURABLE AND STURDY: hose is constructed from polypropylene with good flexible, durable and portable, this is a good replacement to keep your air conditioner from leaking when the essential vent hose has cracked.
  • EASY TO INSTALL: gently extend out the exhaust hose to meet up with the existing hose, line up with the both ends, clockwise rotate until it snaps into place, it's easy to install.
  • Note: please make sure this is the correct hose both the size and thread for your portable air conditioner before purchasing.
  • If you have an adapter that screws on the end, the winding direction is very important.If you have 5" ends but make sure that your ends are right hand threaded because the hose is right handed some need left hand threaded,If you have any problems about your purchase, please don't hesitate to contact us and we'll make it right.
Check Stock

Taprite Regulator Guage, 0-2000 PSI, Left Hand Thread

  • 0-2000 PSI replacement gauge for a regulator requiring a left handed thread.
  • 0-2000 replacement gauge for regulators that required left hand thread on high pressure side..
  • Shipping rate is for the Continental US ONLY..
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

#6-32 UNC Flat/Countersunk Head Socket Screws,100-Piece,Stainless Steel,Full Thread,Right Hand #6-32 x 1-1/4

  • Driver type: Hex Key/Allen Key/Hex wrench/Hex Bit.
  • Stainless Steel, Full Thread, Right Hand.
  • #6 Countersunk Head Socket Machine Screws.
Check Stock

Ball Joint Kit,Set of (3) Tie Rod End with grease fitting Fits for Club Car DS Golf Carts (1976-2008)

  • Fits Club Car DS electric golf cart models 1976-2008.
  • Brand new high quality Club Car DS tie rod end ,Allows your steering and suspension the ability to perform properly..
  • Ball Joint,Left-Hand Thread(included 2Pcs),OEM#7540.
  • Ball Joint,Right-Hand Thread(included 1Pcs),OEM#7539.
  • Set of (3) Right and Left Thread Tie Rod End.
Check Stock

MCMASKE #2-56#4-40#6-32#8-32#10-24 1/4 -20 5/16 -18 UNC 304 Stainless Steel Socket Head Cap Screws Assortment Kit

  • They are coarse thread.Screws Thread Diameter: #2,Thread Pitch: 56 Per Inch.
  • #6,Thread Pitch: 32 Per Inch.#8,Thread Pitch: 32 Per InchThread.
  • 304 stainless steel have good chemical resistance and may be mildly magnetic.
  • The assortments contain the following sizes:#2-56x3/16"(20PCS).
  • The #2-56 to 5/16"-18 UNC 304 Stainless Steel Socket Head Cap Screws Kit are includes most common SAE standard sizes so you can easily replace a lost screw.
  • Packed in a plastic box,Easy to install and durable to use.
Check Stock