Categories

Best Left handed Tap And Die Kit With

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Swpeet 360Pcs 3/4\ 1/2\ 3/8\ Galvanized Hog Rings with Straight Hog Ring Pliers Assortment Kit, Professional Upholstery Hog Rings Installation Kit for Bungee Shock, Cords, Animal Pet Cages, Bagging

  • 1, What You Get ------ In this kit, You will get 360Pcs 3/4" 1/2" 3/8" Galvanized Hog Rings with Hog Ring Pliers Angled Assortment Kit, Including 120Pcs 3/4" Hog Rings.
  • 120Pcs 3/8" Hog Rings and 1Pcs Hog Ring Pliers Angled, Easy crimping and closure, Hog Ring kit is spring-loaded to hold hog rings in jaws, 360Pcs galvanized hog rings (Galvanized to Prevent Rusting)..
  • 2, 360Pcs 3 Different Sizes Works for Most Hog Rings ------ We have prepard 3 Different sizes: 3/4, 1/2, 3/8 inch designed for use in bungee or shock cords, netting, cages, bagging, traps, sausage casing and meat bags, and fencing. Hog rings made from rustproof galvanized steel..
  • 3, 1Pcs Straight Hog Ring Pliers ------ Comes with Hog Ring Pliers, This pliers Simple to use.
  • Ergonomic and comfortable non-slip plastic coated handles.
  • Left or right-handed us, Spring Loaded easily hold hog rings in place.
  • Compatible with most hog ring sizes up to 0.75 inch..
  • 4, Wide Applications ------ This kit Designed for us in auto upholstery, car seat heater heated heating cooler cooling cool, Animal pet cage, dog cage, cat cage, fence, railing, car seat cover. If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

480Pcs 3/4" 1/2" 3/8" 1" Galvanized Hog Rings with Straight Hog Ring Pliers Assortment Kit, Professional Upholstery Hog Rings Installation Kit (Bent Hog Rings Pliers Kit 1)

  • 1, What You Get — In this kit, You will get 480Pcs 3/4" 1/2" 3/8" 1" Galvanized Hog Rings with Hog Ring Pliers Angled Assortment Kit, Including: 120Pcs 1" Hog Rings.
  • 120Pcs 3/8" Hog Rings and 1Pcs Hog Ring Pliers Angled, Easy crimping and closure, Hog Ring kit is spring-loaded to hold hog rings in jaws, 360Pcs galvanized hog rings..
  • 2, 1Pcs Bent Hog Rings Pliers ------ Comes with Hog Ring Pliers, This pliers Simple to use.
  • Nice for workers allow easy wrist movement and reduce hand fatigue while working. Ergonomic and comfortable non-slip plastic coated handles.
  • Compatible with most hog ring sizes up to 1 inch..
  • 3, 480Pcs 4 Different Sizes Works for Most Hog Rings ------ We have prepard 4 Different sizes: 3/4, 1/2, 3/8, 1 inch designed for use in bungee or shock cords, auto & furniture upholstery, pet cages, netting, cages, bagging, traps, sausage casing and meat bags, and fencing. Hog rings made from rustproof galvanized steel..
  • 4, Wide Applications - This kit Designed for us in auto & furniture upholster....
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

Hog Ring Pliers with 483Pcs 3/4\ 1/2\ 3/8\ 1\ Galvanized Hog Rings and Anti-Slip Gloves Perfect for Furniture Upholstery, Auto Upholstery, Cords, Animal Pet Cages, Bagging (Bent Hog Rings Pliers Kit)

  • ♛【What You Get】— In this kit, You will get 480Pcs 3/4" 1/2" 3/8" 1" Galvanized Hog Rings with Hog Ring Pliers Angled Assortment Kit, Including: A pair of Anti-Slip Gloves. 120Pcs 1" Hog Rings.
  • 120Pcs 3/8" Hog Rings and 1Pcs Hog Ring Pliers Angled, Easy crimping and closure, Hog Ring kit is spring-loaded to hold hog rings in jaws, 480Pcs galvanized hog rings..
  • ♛【1Pcs Straight Hog Ring Pliers】— Comes with Hog Ring Pliers, This pliers Simple to use.
  • Nice for workers allow easy wrist movement and reduce hand fatigue while working. Ergonomic and comfortable non-slip plastic coated handles.
  • Compatible with most hog ring sizes up to 1 inch..
  • ♛【480Pcs 4 Different Sizes Works for Most Hog Rings】— We have prepard 4 Different sizes: 3/4, 1/2, 3/8, 1 inch designed for use in bungee or shock cords, auto & furniture upholstery, pet cages, netting, cages, bagging, traps, sausage casing and meat bags, and fencing. Hog rings made from rustproof galvanized steel..
  • ♛【Wide Applications】— This kit Designed for us in auto & furniture upholstery, pet cages, animal pet cage, dog cage, cat cage, fence, railing, car seat cover, sausage and meat casing, fencing repairs, Traps, a....
Check Stock

Heavy-Duty Snap Setter Fastener Pliers Snap Tool Kit Vice-Grip Tool for Fastening Metal Snap Rings Replacing Metal Snaps Repairing Boat Covers Canvas Black+Orange

  • Snap Pliers: This snap fastener kit for boat cover, canvas canopy, tarp, awning or sewing heavy duty outdoor coverings. Tools built tough for....
  • Strong & sturdy fastening pliers but incredibly easy to use & lightweight (1.2lbs). Metal snap pliers enhanced with no-slip traction grip for safety &....
  • Adjustable pliers design enables greater leverage over die-and-peg snap tools, the vice grip system allows you to get good leverage to crimp the two....
  • Attach Fasteners Securely - Better than pounding on those installing punches, and stop hurting your hand. 2 interchangeable dies puts both male and....
  • Our Shop pursues your 100% satisfaction. If you ever have a problem with your products,Totally refundable if any quality or sizing issue.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

uxcell Metric Machine Tap M4 x 0.7mm H2 HSS Ti-coated 3 Straight Flutes Thread Tapping DIY Tool

  • Tap Size: 3/8"-24 UNF thread, 2B thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings, suitable for wide ranges of applications..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Fellowes Binding Machine Starlet2+ Comb Binding (5227701)

  • ...r faster binding, saves time and effort for large workloads.
  • 【Professional & Customizable Binding】46 Disengaging Pins Die design, fully adjustable disengageable pins let you control where the binding machine punches holes, comes with 100pcs of 3/8'' 21-ring black PVC comb spines starter kit and coil crimper pliers.
  • 【Adjustable Margin Design】TIANSE coil binding machine is suitable for Letter Size (42 holes), A4 Size (46 holes), A5 Size (33 holes). With adjustable side and edge guide, this machine also ensures a precise alignment with each document your bind, and you can easily customize the paper margin: 3mm, 5mm, 7mm to create professional-looking works. This binding machine utilizes 4:1 pitch plastic binding coils.
  • 【Humanized Full Handle】Our sturdy-grip handle allows you to punch holes in your documents either left- or right-handed. Simply apply steady pressure to punch holes in up to 20 sheets of 80g(paper thickness≈20lb) paper at a time. You can insert up to 2” diameter coils by hand or up to ⅞” coils using the electric coil inserter.
  • 【Lifetime Warranty】Please press the punching handle all the way to the bottom and DO NOT pause halfway while punching, otherwise the papers will get stuck. (To keep the machine sustainable, w....
Check Stock

uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool

  • Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
  • Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stock