Categories

Best Left handed Thread

M12 x 1.25 Metric 12MM High Speed Steel LEFT HAND Plug Tap 4FL LH

  • 12 mm x 1.25 mm 4FL high speed steel LEFT HAND high speed steel plug tap.
  • Package Included: 1 piece of M12 x 1.25 Plug Tap.
Check Stock

MCAMPAS 350PSI Soft Nose P.O.L valve with 12 Feet Propane Weed Burner Torch Hose Adapter for Use Connects to U.S.Any Standard Propane Tank to Propane Weed Burner Torch Head Burner

  • ➤Suitable use fit American standard 5lb-100lb PPOL valve regulator propane tank, Converts POL LPG propane tank service valve connects to propane weed burner.
  • ➤12 Feet 350 psi high pressure propane hose can extend enough propane tanks to connect to propane torch weed burner to safely use the space.
  • ➤Propane weed burner torch hose adapter outlet joint is 5/8” parallel pipe thread Joint （3/8"-19 Left Hand Internal Thread.)compatible with standard propane torch gas burners whose inlet thread diameter is 5/8" adapter.
  • ➤The POL lp tank service valve propane hose adapter has passed CSA certification and has an internal overcurrent protection mechanism to prevent leakage. POL safety valve with handle (loose by turning right, tight by turning left) connects to any standard propane tank has lp tank POL service valve.
  • ➤It replaces the problematic propane hose adapter on the propane weed torch. NOTE:, before purchasing, please check whether the propane weed torch air inlet connector is compatible with the 3/8"-19 internal thread left-handed or joint thread diameter is 5/8" joint.
Check Stock

M72 x 3 Left Hand Tap LH Metric Thread Tap HSS Plug Tap Ship by Express Delivery in 4 days

  • M72 x 3 Left Hand Tap LH Metric Thread Tap.
  • We will send by Express, clients can receive in 4 days.
Check Stock

.750' 3/4” rod end heim joint kit left and right hand thread

  • Includes 1-right hand thread 1-Left hand thread Heim set. Spacers Jam nuts and tube adapters included..
  • Misalignment spacers fit 5/8" standard bolts (Grade 8 or better recommended).
  • Use these for low-load applications. Steering shafts, light-duty track bars or suspension ends..
Check Stock

Made in Canada Indie & Alternative

  • UNIVERSAL THREAD REPAIR TOOLS - one hand tool repairs inch or metric, right or left handed, coarse or fine threads.
  • QUICK SIZING - no need for a caliper or pitch gauge to determine diameter or thread count or type.
  • RAPID ADJUSTMENT - tool adjusts and quickly adapts to particular diameter and pitch of fastener thread.
  • HOW TO USE - automatically chases good threads and the cutter repairs damaged threads.
  • QUALITY CUTTER - blades are made of High Speed Steel induction hardened to 62 Rockwell (INT) and 58 Rockwell (EXT) for longevity of life.
Check Stock

Echo 78890-21001E High Capacity Speed Feed 450 Trimmer Head

  • PLEASE NOTE: Consult owner's manual for proper part number identification and proper installation. It may look like the right part, but it may not fit your particular machine.
  • Holds 20' of .095" line. Max line size .130".
  • Reload in 30 seconds or less, no disassembly required.
  • Recommended for trimmers with engines 25cc and larger.
  • Includes adapters to fit most premium trimmer brands like Stihl, Husqvarna, Tanaka, Echo, Shindaiwa, Redmax, Maruyama & Honda.
  • Included adapters are: 8mm x 1.25 LHF (Left Hand thread Female), 10mm x 1.0 LHF, 10mm x 1.25 LHF, 10mm x 1.25 LHF Extended, 7mm LHM (Left Hand thread Male) and 8mm LHM.
Check Stock

Nintendo Nes Security 3 Tool Video Game Cartridge Cleaning Kit

  • UNIVERSAL THREAD REPAIR TOOLS - one hand tool repairs inch or metric, right or left handed, coarse or fine threads.
  • QUICK SIZING - no need for a caliper or pitch gauge to determine diameter or thread count or type.
  • RAPID ADJUSTMENT - tool adjusts and quickly adapts to particular diameter and pitch of fastener thread.
  • HOW TO USE - automatically chases good threads and the cutter repairs damaged threads.
  • QUALITY CUTTER - blades are made of High Speed Steel induction hardened to 62 Rockwell (INT) and 58 Rockwell (EXT) for longevity of life.
Check Stock

Hyperkin Hyper Blaster HD for Duck Hunt compatible with NES

  • UNIVERSAL THREAD REPAIR TOOLS - one hand tool repairs inch or metric, right or left handed, coarse or fine threads.
  • QUICK SIZING - no need for a caliper or pitch gauge to determine diameter or thread count or type.
  • RAPID ADJUSTMENT - tool adjusts and quickly adapts to particular diameter and pitch of fastener thread.
  • HOW TO USE - automatically chases good threads and the cutter repairs damaged threads.
  • QUALITY CUTTER - blades are made of High Speed Steel induction hardened to 62 Rockwell (INT) and 58 Rockwell (EXT) for longevity of life.
Check Stock

doublesmt 6 Inch Thread Portable A/C AC Air Conditioner Exhaust Hose Coupler/Coupling/Connector, Support Clockwise/Counter-clockwise Thread, AC Hose Coupler Coupling Extension

  • ✅ Universal Clockwise Counterclockwise threaded coupler connects to a threaded hose. Exhaust Hose Coupler provide a best solution for putting my ac exhaust through the wall or your window..
  • ✅ Using this portable air conditioner connector to extend the exhaust duct no longer needs to distinguish between left-handed and right-handed. Left-handed and right-handed can be used. One left-handed and one right-handed can also be connected..
  • ✅ Ac air conditioner exhaust hose coupler:secure fit on 6-inch tubes with no leak. Compatible with Outer diameter 138mm. Inner diameter 6 inch..
  • ✅ Portable ac flex duct coupler inner: diameter does not take the thread into consideration and is the maximum diameter of a compatible tube..
  • ✅ Using this 6 inch portable ac connector to extend the exhaust duct no longer needs to distinguish between left-handed and right-handed. Left-handed and right-handed can be used. One left-handed and one right-handed can also be connected.6 inch or 5.9 inch is same product..
Check Stock

QSC 3/8 X 3/8-24 Economy 4-Link Rod End Kit with Bungs .058 Wall, Rod End, Heim Joint

  • Rod Ends Specs: Body: C1045 Steel Heat Treated, Ball 52100 Bearing Steel Precision Ground Heat Treated, Bore: .375, Ball Width: .500, Thread: 3/8-24, Load Rating: 7,605.
  • Jam Nut Specs: Thread: 3/8-24, Width: 9/16, Height: 1/4.
  • Bung Specs: 1045 Mild Steel, Thread: 3/8-24, Fits tube Size: 3/4" OD X .634 ID X .058 Wall.
Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

  • 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
  • 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
  • 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
  • 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
  • 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..
Check Stock

FomaSP Carbide Threading Inserts for Steel and Stainless Steel 16IR 14UN / 16IR AG60 for Threading Cutting Tools Metal Cutting 10 PCS

  • Package include:2pcs Boring bar with wrench +5pcs 16ER+ 5pcs 16IR Inserts.
  • SNR0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread right cutting.
  • SNL0013M16 : overall length : 150mm=5.9inch , shank diameter : 13mm=0.51inch, cutting direction : internal thread left cutting.
  • Suitable for machining Stainless steel and Steel parts.
  • About the inserts:IR--Internal left hand inserts / ER- External right hand inserts.
Check Stock

JEGS Adjustable Throttle Linkage Rod | Made in USA | Universal Fit For Holley, Edelbrock, Carter, AFB, Quick Fuel Carburetors, and More

  • UNIVERSAL FITMENT FOR Carburetors such as Holley, Edelbrock, Carter, AFB, Quick Fuel and others.
  • WILL FIT OTHER FACTORY THROTTLE LEVERS with 1/2 “hole, check center-to-center measurement before ordering.
  • MADE IN USA with high quality materials and assembly.
  • THREAD SIZE is 1/4 “ -28 right hand thread and 1/4 “-28 left hand thread.
Check Stock