Categories

Best Level Sensor Switch Float

MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch Blue - Automatic

  • Outlet Diameter: 29mm/ 1.14 Inch (1-1/8").
  • Built-in float switch! (No separate float switch is needed).
  • No power use until pump is activated by internal float switch (when water level rises).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
Check Stock

uxcell 5pcs ZP4510 Liquid Water Level Sensor Vertical Float Switches

  • Switch Body Size : 23.3 x 57.7mm / 0.9" x 2.27"(Max D*H).
  • Package Content : 5 x Water Level Sensor.
Check Stock

Basement Watchdog BWE 1000 Gallons Per Hour Basement Watchdog Emergency Back-Up Sump Pump

  • Pumps 2,000 GPH at 0 ft. of lift and 1,000 GPH at 10 ft. of lift.
  • User-friendly control panel monitors pump, power and battery conditions 24 hours a day and provides visual and audible alarms to describe what to do for easy maintenance.
  • Dual float switch provides 2 times the protection.
  • Provides days of intermittent pumping power on a single battery charge.
  • Fluid sensor monitors fluid level of the battery.
  • Compatible with both wet cell and maintenance-free AGM batteries.
  • Compact pump can be installed even in small or narrow sump pits.
  • Detailed instructions with over 90 pictures walk you through the simple installation process.
  • Includes control unit with a dual float switch, a battery fluid level sensor, pump with a 1-1/2 in. PVC pipe adapter, battery box and charger (battery not included - sold separately).
Check Stock

Amarine-made 12v 1100gph Auto Boat Bilge Pump Automatic Submersible Boat Bilge Water Pump (A: 1100gph Auto pump)

  • Compact, automatic, fully submersible electric pump.
  • Built-in float switch! (No separate float switch is needed).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
  • No power use until pump is activated by internal float switch (when water level rises).
Check Stock

Sump Alarm Water Sensor, Sump Pump Alarm with 10ft Float Switch for Indoor & Outdoor Use, Weatherproof Water Detector Alarm with 90dB Audible Alarm

  • MONITOR WATER LEVELS from your home with our septic alarm by Sump Alarm. Our flood sensor lets you know when water levels approach a dangerous stage..
  • IP67-rated with gasketed enclosure and weatherproof components, Sump Alarm Water Alarm is ideal for lift stations, grinder pumps and pool sumps..
  • POLYPROPYLENE FLOAT SWITCH on our water sensor alarm detects changes within 6” for fast troubleshooting. Minimize property damage with quick notification from our water level sensor..
  • An LED light and a 90 db horn deliver visual and audible alerts from the moisture sensor..
  • 6' AC Cord, 10 foot Float Switch Cord from Alarm to Sump/ Tank.
Check Stock

Amarine Made Bilge Pump for Boat Automatic Submersible 12V 1100GPH Bilge Water Pump with Float Switch

  • Compact, automatic, fully submersible electric pump.
  • Built-in float switch! (No separate float switch is needed).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
  • No power use until pump is activated by internal float switch (when water level rises).
Check Stock

SEAFLO Non Automatic Bilge Pumps for Boats 2000 GPH 12V Boat Marine Plumbing Electric

  • Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring..
  • Outlet Diameter: 29mm/ 0.95 Inch (1-1/8").
  • Built-in float switch! (No separate float switch is needed).
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
  • No power use until pump is activated by internal float switch (when water level rises).
Check Stock

BioCube Size 29 & Size 32 Replacement Pump

  • Type: 2PCS M16 Water Level Sensor, Switching voltage (Max): 110V DC.
  • Float level switch is a kind of liquid level control device with simple structure, no external power supply, no complicated circuit, convenient to use. Has the advantage of smaller size and longer service life than mechanical switch..
  • Mainly used to sense the liquid level in a tank to turn on/off a pump, an indicator , an alarm or other device..
  • 2 Way optional to install as normally closed/open switch according to your needs..
  • Suitable for hydroponics, saltwater , freshwater , gardening, aquariums for power control, pet bowls, fish tanks, filtration, heating etc..
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • ... fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and most marine, RV, etc..
  • And it can also be applied in aquarium, small swimming pool, fountain and other places that need drain the water.
Check Stock

mxuteuk 2 Pcs Side Mounted Horizontal Liquid Float Switch Water Level Sensor Black for Aquariums Tank DPL-1-BK

  • Temperature Rating: -30~125 degree Centigrade.
  • Max Switching Current: 0.5A ； Max Contact Resistance : 100m ohm.
  • Float Ball Size(Approx) : 2.3 x 1.7cm /0.9" x 0.67" (L*D).
  • The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance..
Check Stock

AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise with The Switch

  • Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring..
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
  • No power use until pump is activated by internal float switch (when water level rises).
  • Built-in float switch! (No separate float switch is needed).
Check Stock

How to Connect Fire TV with your Echo

  • REAL-TIME MONITORING with Level Sense Pro Water Alarm Sensor lets you know immediately about fluid levels in wells and cisterns. Discover moisture and leaks early so you can act fast and limit damage..
  • WIFI-ENABLED water alarm sensor with float switch monitors temperature, water level, humidity, leak detection and power outage. Cloud check-in monitoring helps deter frozen pipes, flooded basements and more..
  • Back-Up power provided by an auto-recharging internal back-up battery, Level Sense Pro Wifi Water Leak Detector stays on-top of sump pump levels even when storms interrupt electrical service to your home..
  • UNIVERSALLY COMPATIBLE with Android and iOs devices, our wifi water leak sensor can also be wired into your home security system. Free basic portal service includes customizable output responses..
  • WAREHOUSE YOUR DATA with our smart water sensor so you can compare depth histories, pump cycles and run times. See current conditions and tank levels anytime with any tablet, cell phone or computer..
Check Stock

MySpool Water Level Alert with Text Message and Email Notifications, Battery Powered with a Float Sensor

  • Email and text message notification when water level change is detected. All services are free..
  • Battery powered wireless water level detector using your WiFi, no app to install and no hub is required. Perfect as a standalone high or low water alarm..
  • Waterproof float sensor with a 3 ft wire connected to a rugged enclosure protecting smart electronics. This float sensor can be used to detect high or low water levels, the default setting detects high water levels. Flip the float ring and use this device to detect low water levels in aquariums, ponds, and storage tanks..
  • Alert is sent if the float rises to signal high water level. Flip the float ring to send alert when water level falls. 3 AAA batteries, included, last for years with limited activity..
  • Rugged enclosure supports up to 250 lbs, designed to operate in dusty and moldy environments. Avoid costly repairs by keeping MySpool Water Detector anywhere that has the potential for flooding or developing a leak..
Check Stock