Categories

Best Light Guage Steels For

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 10 Luxury

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 12 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety. Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use, Perfect for Chefs and Home Cooks Alike! (10', 3 Dot)

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also cause tiny metal particles from your blade to become airborne. Our honing rods are magnetized to prevent those particles from being inhaled or landing on nearby food..
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was meticulously chosen. You won’t find cheap plastic handles or soft, inexpensive steel. When you hold it, the weight immediately reveals how solid the construction is, and the design adds class to any kitchen..
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This is contrary to knife sharpening steels or wet stone sharpeners, which should be used sparingly. (More details in product description.).
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth to remove the metal particles. For....
Check Stock

E7018 3/32\ 1/8\ 5/32\ Premium Arc Welding Rods Carbon Steel Electrode 60 lb (10 lb x 6-pks) (1/8\ 60 lbs)

  • Cold rolled steels, or other steels containing high sulfur or selenium.
  • Low alloy and mild steels when stress relieveing normally would be required but cannot be done.
Check Stock

EZARC Carbide Reciprocating Saw Blade R678HM Endurance for Thick Metal, Cast Iron, Alloy Steel 6-Inch 8TPI, 3-Pack

  • [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades.
  • [Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in tough applications, e.g. high-alloy construction steels, stainless steels, rebar and car beams.
  • [Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or hardened steels..
  • [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work.
  • [Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc..
Check Stock

Ultra Sharp XL Double-Sided Diamond Sharpening Stone | Coarse 400 and Extra Fine 1000 Grit Diamond Sharpener | 8 x 2.5 in.| Durable Non-Slip Base

  • High Quality Monocrystalline Diamonds - Diamonds are electroplated onto a solid steel plate. This process ensures the stones stay flat and never need to be lapped like other stones. No adhesives or plastic parts are used resulting in greater durability..
  • Sharpens Faster - The 400# grit side removes metal very quickly while the 1000# grit produces a razor sharp edge. The large 8" x 2.5" size sharpens even the biggest chef’s knife with ease. The user only needs to apply light pressure and let the diamonds do the work..
  • Sharpens Any Steel – Sharpens high carbon steels, hardened stainless steel, all tool steels, and even the new super steels. It also sharpens ceramic kitchen knives with no problem..
  • Unique Diamond Pattern - Eliminates the tendency to clog and keeps the sharpening surface clean and clear of metal shavings..
  • Adjustable Stone Holder - Keeps the stone firmly in place while sharpening and provides the knuckle clearance needed to hold a consistent angle..
Check Stock

Forney 30810 Welding Rod, 1/8-Inch

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

SPEED TIGER ICSM Chamfer End Mill - CNC Carving Bits, V Groove, 60 Degree, 1/4\Shank 2\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan(1 Piece, 60 Degree)

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, MDF, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Ideal for Chamfering, Carving V Groove, Centering.
Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock

Ibanez IEGS71 7-String Electric Guitars Strings - Regular Light Gauge,silver

  • Set of Regular Light strings for a 7 string electric guitar.
  • Regular light guage 010/ 013/ 017/ 026/ 036/ 046/ 059.
  • The lower 4 wound strings are nickel wound over American hexagonal steel core wire for increased strength.
  • Designed by Ibanez for use with any make and model of 7 string electric guitar.
Check Stock

SPEED TIGER ITBTA Carbide Tapered End Mill- CNC Carving Bits, Ball Tip R0.5, 1/4\Shank 3\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/4\4T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock