Categories

Best Light Weight Insulating Firebrick

DEVIL-FORGE Gas Propane Forge DFPROF3+2D, 3 Burners DFP (240.000 BTU) use 1, 2 or 3, Gas Ball Valve, 2 Doors, Knife Making, Blacksmith, Farrier, 2500°F / 1370°C

  • INTERIOR DIMENSIONS (WxHxD): 5.8” x 5.8” x 24” (145mm x 145mm x 600mm). WEIGHT: 32lb / 15kg. TEMPERATURE: 2500°F / 1370°C.
  • INSULATION: the interior of the forge is fully lined with 1” of the ceramic blanket. The forge bottom is made of firebrick, providing superior strength and durability.
  • FITTING: POL CGA-510. Our unit is ready to use in the U.S.A. Works with a standard propane tank.
  • THE FORGE BODY IS MADE OF: steel 16 gauge (1.5mm). GAS PRESSURE REGULATOR, gauge with Mpa monometer. Pressure Range 0-0.6Mpa (0.1Mpa - 1Bar - 14.5PSI).
  • PACKAGE INCLUDES: Gas Propane Forge Model: DFPROF3+2D with 2 doors, 3 connected DFP burners, Tongs, Firebrick, 2 Door handles, Gas pressure regulator with manometer, 6.5ft / 2m gas hose, 2 Clamps, Refractory rigidizer powder, Brush, User manual, Heat Resistant Gloves (the appearance of the gloves may vary).
Check Stock

Rutland Products Black Rutland Fireplace Mortar Cartridge 10.3-Ounce

  • Perfect for repairing small chips or cracked firebrick, re-pointing mortar joints between firebricks, and bonding firebricks together.
  • Sets as hard and as strong as firebrick after curing.
  • Approximate Coverage: 99 feet with 1/8" bead..
Check Stock

Dap 18854 Stove & Fireplace Mortar (Pack of 6)

  • Non-combustible silicate cement used for patching chipped firebrick in fireplaces and sealing.
  • A non-combustible silicate cement for applications in wood-frame construction where an ASTM E136 sealant is required..
  • Adheres firmly to the firebrick when wet or dry. Sets rock hard when fired.
  • Use to tuck point between firebricks and to repair broken firebricks.
Check Stock

US Stove Company FBP6E FireBrick, 6-Pack, Cream, 3 Fl Oz

  • Replacement bricks for firebrick liners on stoves.
  • Dimensions: 4-1/2 inches x 9 inches x 1-1/4 inches.
  • For any brand of wood or coal stove that uses this standard-sized brick.
Check Stock

10.1 oz Dap 18854 Black Mortar High Heat Pack of 12

  • Non-combustible silicate cement used for patching chipped firebrick in fireplaces and sealing.
  • Used for applications in wood frame construction where an ASTM E136 non-combustible sealant.
  • Adheres firmly to the firebrick when wet or dry. Sets rock hard when fired.
  • Use to tuck point between firebricks and to repair broken firebricks.
  • It has been tested in accordance with ASTM E136 and withstands temperatures up to 2,000° F.
Check Stock

Bon Tool 12-178 Rub Brick - Fluted 6\ X 2\ X 2\ - 20 Grit

  • GIRtech USM – chamotte firebrick has improved thermal conductivity compared to traditional chamotte products..
  • Firebrick can be used in any type of domestic heating units, such as brick fireplaces, steel furnaces, heating stoves, barbecues and barbecue complexes, ceramics kilns and blacksmith forge..
  • It can be used both for arranging the hearth of the furnace and for lining the inner surface of the furnace..
  • Could be cutted or processed with a special tool if necessary..
Check Stock

Garland Mfg 31004 Split Head Hammers, 2' Diameter, 14' Handle, Rawhide

  • The split-head hammer does the work of six different hammers because the face can be easily changed.
  • The base hammer has been the leading refractory hammer for decades.
  • Used for installation and demolition of coke ovens, blast furnaces, and other applications where refractory brick (firebrick) is being installed or removed.
Check Stock

GripGrab Light Spring Fall Cycling Leg Warmers Anti-Slip Lightweight Thin Bike Leg Sleeves Breathable Bicycle Leg Warmers

  • Lightweight and Breathable - The GripGrab Light Leg Warmers convince with their low weight and high breathability.
  • Ideal when you cycle in spring, autumn and on cold summer days.
  • Anti-Slip - Reliable silicone grippers on the top hem keep these lightly insulating warmers in place when you are out riding your road bike, MTB, CX or gravel bicycle.
  • Avoid Sunburn - These leg-warmers feature SPF 50+ and are your UV protection when cycling in the summer sun.
  • UV rays can be harmful to your skin so it's better to be protected against sunburn.
  • Be Seen - Increasing your visibility in traffic, these comfortable cycling warmers with maximum freedom of movement include reflective details which brighten up when they're hit by light.
  • Cozy Comfort - The low weight, soft and breathable, insulating fabric and the ergonomic cut of these anti-slip bicycling warmers gives them an outstandingly comfortable feel on your skin.
Check Stock

Iguana Ceramic Kiln

  • The Iguana is powered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interior to a full cone 10..
  • The Iguana is easy on the back muscles. With the 22” stand, the interior floor height is a comfortable 34 ½”..
  • Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open 160 degrees on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat..
  • Industrial-gauge elements are seated and protected in dropped, recessed firebrick grooves. The elements are easy to replace, because you can comfortably reach into the kiln. For your peace of mind, the Iguana includes a safety switch that shuts off power to the controller when not in use. The ventilated switch box is generously louvered for air circulation for the long life of the electrical components. Yet dust is kept to a minimum..
Check Stock

menolana 2pcs Insulating FireBrick Fire Brick Jewelry Making Processing Casting Tools

  • The ceramic soldering board is lightweight and reflects heat. Ac-id-resistant, Non-as-bestos, flame-resistant and non-combustible. Best choice for jewelry and other soldering crafts..
  • Unique honeycomb design refractory brick with holes to hold pins which can keep your work in place..
  • Size: 13.6 x 9.7 x 1.2cm / 5.35 x 3.81 x 0.47inch. Weight: Approx. 5.6 oz (158.5 g)..
  • Capable of withstanding temperatures that range up 2000ºF..
  • Refractory welded plate jewelry processing tool. There are airy holes throughout the board, please set it on top of a firebrick to protect your bench when soldering..
Check Stock

30 Pack Wall Plate Insulation Gasket,Outlet Insulation Switch Plate Insulation Replacement Gasket Replacement Made with Weatherproof One Gang Double Gang Triple Gang Switches,2.5 x 4.2 Inch (White)

  • Abundant Quantity: You will receive a total of 30 power socket spacers, abundant enough for your home's daily use and spares. The size of each insulating spacer is 107*64mm (4.2*2.5inch), the size is general size, you can also freely cut it according to your own needs..
  • 3IN1 Size: Wall Plate Insulation Gasket adopts a 3-in-1 design of one switch, two switches, and three switches. You can freely combine and cut according to the needs of your home switch, saving time and effort, saving time and cost..
  • Insulation Material: The wall panel insulation gasket is made of EVA foam material, which is safe in material, light in weight, small in size, has specific windproof and insulation effects, can fit your home switch very well, has good sealing and can be well protected You and your family can use electricity safely and prevent accidents effectively..
  • Easy to Use: The insulation gasket of the wall outlet is designed in the right size, which is very convenient to use. You only need to confirm the type of switch, select the appropriate gasket and cut it out, stick the gasket firmly on your switch, and then tighten the switch cover. That's it. It is very simple and safe to use..
  • Widely Applicable: The package contains 30 pieces of wallboard insulating spacers, wit....
Check Stock

ZeroXposur Girls Puffer Jacket Fleece lined Winter Coat with Lined Hood and Faux Fur Trim (Multi, X-Large)

  • Wonderful heating efficient girls winter coat hoodie that adds extra insulation and warmth to protect her from the cold. The hoodie covers the head and neck to ensure that there are fewer places for the cold to sneak through.
  • The inside of the puffer jacket hoodie is made from plush high pile ultra-soft material that adds heating efficiency, comfort, and a great fashionable appeal.
  • Soft, lightweight and insulating, highly breathable, and Hydrophobic which means that the ZeroXposur Marianne winter jackets for girls fleece cuffs holds less than 1% of its weight in water and doesn't lose its insulating effectiveness when wet.
  • Exterior repels moisture and protects her from the wind. The ZeroXposur Marianne girls winter coats will keep her dry during rainy or snow days..
  • Metallic Grey, Black/Kobe Pink, Black/Purple/Blue, Light Sea Green/Grey, Purple/Pink/Blue, Blue/Kobe.
Check Stock

ZeroXposur Girls Puffer Jacket Fleece lined Winter Coat with Lined Hood and Faux Fur Trim (Ice Cave, X-Large)

  • Wonderful heating efficient girls winter coat hoodie that adds extra insulation and warmth to protect her from the cold. The hoodie covers the head and neck to ensure that there are fewer places for the cold to sneak through.
  • The inside of the puffer jacket hoodie is made from plush high pile ultra-soft material that adds heating efficiency, comfort, and a great fashionable appeal.
  • Soft, lightweight and insulating, highly breathable, and Hydrophobic which means that the ZeroXposur Marianne winter jackets for girls fleece cuffs holds less than 1% of its weight in water and doesn't lose its insulating effectiveness when wet.
  • Exterior repels moisture and protects her from the wind. The ZeroXposur Marianne girls winter coats will keep her dry during rainy or snow days..
  • Metallic Grey, Black/Kobe Pink, Black/Purple/Blue, Light Sea Green/Grey, Purple/Pink/Blue, Blue/Kobe.
Check Stock