Categories

Best Light Wiring Harnesses

Curt 51110 51383 Venturer Brake Control and Wiring Harness Kit

  • SIMPLE TO INSTALL. This universal wiring harness allows for simple, straightforward trailer brake controller installation. It comes with blunt-cut wires to splice into your vehicle's existing wiring.
  • RELIABLE POWER. This brake controller wiring harness is constructed with quality 12-gauge wires to ensure consistent power between your trailer brake controller, vehicle and electric trailer brakes. The wires are also color-coded.
  • UNIVERSAL. This brake controller wiring is made for universal application, allowing you to splice your CURT brake controller into a variety of vehicles. Vehicle-specific wiring harnesses are also available (sold separately).
  • VERSATILE USE. This trailer brake controller wiring is compatible with any CURT trailer brake controller equipped with a quick plug connector. It also features a 24-inch length for flexible positioning of the brake controller on the dash.
  • PROTECTED WIRES. To keep power flowing and ensure your connection stays well-protected, this trailer brake controller harness comes with a slit-loom sleeve, helping to keep the wires bundled, avoid crushing and resist abrasions.
Check Stock

Night Driving Riding Padded Motorcycle Glasses 011 Black Frame with Yellow Lenses (Black - High Definition Lens)

  • 【Package Including】2x 30w Motorcycle LED Driving Fog Lights.
  • 2 x Offroad Led Light Mounting Brackets Clamp Kit.
  • 1x 3M rubber spacers 1 x installation manual. It comes with everything you need for them to be installed, no need to purchase additional wiring harnesses, plug, or switch..
Check Stock

Dianrui 2Pcs Stainless Steel Mounting Fitting with Holes including 2pcs Brass Gasket,35mm Mounting Fitting Accessories Straight Thread Connector Plug K1-035-1

  • These extensions are great for custom exhaust, moving the O2 sensor placement, or needing more slack for the O2 sensor wiring. These harnesses are a direct plug and play extension for the oxygen sensor and requires no splicing..
  • Compatible with Dodge Jeep Chrysler SRT RAM 1500 Charger.
  • O2 Sensors are not included, these are extension harnesses to allow a longer reach of the existing O2 sensor harness..
  • Each purchase will receive (4) Plug-and-Play oxygen sensor extension harnesses. (2) 24" and (2) 12" extensions are included..
  • Condition:100% new and tested before shipment..
Check Stock

Complete Electrics Stator Coil CDI Wiring Harness for 4 Stroke ATV KLX 50cc 70cc 110cc 125cc-atv wiring harness

  • ...art upright engine 49cc 50cc 80cc 90cc 100cc 110cc 125cc ATV / QUAD / Dirt Bike / Kawasaki KLX / Coolster / Go Kart / 4 wheelers / Scooter / buggy / Motowork & more.
  • Compatible :50CC 70CC 90CC 110CC 125CC ATV MiNI QUAD；atv wiring harness kit,chinese atv wiring harness,complete wiring harness atv,powersports wiring harnesses,50cc scooter wiring harness,110cc chinese atv wiring harness,pit bike wiring harness,110cc atv wiring harness,atv wiring harness,110cc atv wiring,110cc wiring harness,taotao wiring harness,90cc atv wiring harness,gy6 wiring harness,150cc go kart wiring harness.
  • This is a complete electric start engine wiring harness loom,include 1x ATV Wire harness,1x CDI(5Pin AC),1x Solenoid Relay,1xRectifier (Voltage Regulator) ,1x Ignition Switch (2 keys, waterproof),1x Upgraded Multi-functional ATV Switch,1x Stator (Magneto Generator),1x Ignition Coil with lead and 1x Spark plug..
  • Please check the pictures carefully before buying, especially the pictures of Magneto Stator. Professional installation is highly recommended and false assembly may cause fire on the harness，though this occasion happens rarely. Feel free to contact us by emails for solution if you have any problems..
Check Stock

CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat

  • STANDARD FIT. This trailer wiring mounting bracket is designed to securely mount virtually any industry-standard 4-way flat connector.
  • FLEXIBLE MOUNTING. The bracket features a simply friction fit design to accept a variety of trailer wiring harnesses. It allows you to mount the wiring harness onto your vehicle or trailer hitch, whichever is most convenient.
  • HIGH-STRENGTH. This trailer wiring harness bracket is made from solid steel to provide plenty of strength for a solid mount and to remain fixed in spite of vibrations while towing. The steel body will not crack like plastic alternatives.
  • CORROSION-RESISTANT. To face the weather and elements with ease, this trailer wiring bracket is covered in a black powder coat finish, helping to resist rust for long-lasting strength.
  • EASY TO INSTALL. To install this mounting bracket for vehicle-trailer wiring, you can bolt it directly onto your vehicle using the top screw holes, or you can pair this bracket with the CURT 57204 for a convenient, no-drill, tube clamp mount.
Check Stock

Wellmax LED trailer lights, Led boat trailer lights submersible, 12V utility marine trailer light waterproof and DOT approved

  • INCREASED SAFETY. These automotive LED indicator lights add safety and more visibility on the road when driving with a hitch cargo carrier or hitch bike rack. They plug into your vehicle and correspond to the taillights, turn signals and brake lights.
  • VERSATILE. These LED light strips can be used anywhere they're needed. With an adhesive backing, they can be installed on any hitch accessory or even a trailer. They're ideal for use as a bike rack light bar or trailer hitch cargo carrier lights.
  • EASY TO INSTALL. The adhesive backing of this cargo carrier light kit makes it easy to install on virtually any surface. Just stick the strips into place! The lights are right and left-specific.
  • STANDARD CONNECTION. These automotive LED light strips easily plug into any standard 4-way flat connector.
  • COMPLETE KIT. This LED light kit comes with two LED light strips, adhesive backing for each strip and wiring harnesses for a complete installation.
Check Stock

RED WOLF 4-Pin Trailer Wiring Harness to Towing Trailer Add Brake/Signal Light 4 Way Flat Connector Adapter for 2011-2019 Toyota Highlander

  • STANDARD FIT. This trailer wiring mounting bracket is designed to securely mount virtually any industry-standard 4-way flat connector.
  • FLEXIBLE MOUNTING. The bracket features a simply friction fit design to accept a variety of trailer wiring harnesses. It allows you to mount the wiring harness onto your vehicle or trailer hitch, whichever is most convenient.
  • HIGH-STRENGTH. This trailer wiring harness bracket is made from solid steel to provide plenty of strength for a solid mount and to remain fixed in spite of vibrations while towing. The steel body will not crack like plastic alternatives.
  • CORROSION-RESISTANT. To face the weather and elements with ease, this trailer wiring bracket is covered in a black powder coat finish, helping to resist rust for long-lasting strength.
  • EASY TO INSTALL. To install this mounting bracket for vehicle-trailer wiring, you can bolt it directly onto your vehicle using the top screw holes, or you can pair this bracket with the CURT #57204 for a convenient, no-drill, tube clamp mount.
Check Stock

CURT 56027 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Fits Select Buick Enclave, Chevrolet Malibu, Traverse

  • Replacement trailer wiring harness for vehicles originally equipped with a factory installed tow package - perfect for replacing damaged or missing factory harnesses.
  • Quick and easy plug-in installation - no cutting or splicing necessary.
  • simply plug into the existing vehicle connector and you are ready to start towing.
  • 16 gauge bonded wire with 4-flat plug and cap.
  • 7.5 amp stop light/turn signal circuit capacity.
  • Included 4-wire flat connector is compatible with 5, 6 and 7 pole adapters (not included) to fit just about any trailer system.
Check Stock

BraveWAY Motorcycle LED Driving Fog Lights 60W 18000LM Amber White Dual Color 3 Modes Universal Fit Auxiliary LED Offroad Work Spot Lights Customed Wiring Harness Kit Compatible with Truck Car SUV ATV

  • ... 【Package Including】2x 30w Motorcycle LED Driving Fog Lights.
  • 2 x Offroad Led Light Mounting Brackets Clamp Kit.
  • 1x 3M rubber spacers 1 x installation manual. It comes with everything you need for them to be installed, no need to purchase additional wiring harnesses, plug, or switch..
Check Stock

Complete Wiring Harness Kit, ATV Wire Harness for 50cc 70cc 110cc 125cc Scooter Moped Chinese 4 Wheeler Parts with Electrics Stator Coil CDI Solenoid Relay - 110cc Wiring Harness by BOOTOP

  • Complete wiring harness,ATV Wiring Harness Kit Universal fitting: Powersports Wiring Harnesses Fits almost all years Chinese made electric start upright engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. 110CC ATV Wiring harness For Coolster, Kawasaki KLX, Motowork, Dune, Taotao 4 Wheelers, ATV, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Scooter, Buggy..
  • Chinese atv wiring harness, dirt bike wiring harness, pit bike wiring harness,atv parts Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
  • This is a complete atv wiring harness kit, include 1x ATV Wire harness,1x CDI(5Pin AC),1x Solenoid Relay,1xRectifier (Voltage Regulator) ,1x Ignition Switch (2 keys, waterproof),1x Upgraded Multi-functional ATV Switch,1x Stator (Magneto Generator),1x Ignition Coil with lead and 1x Spark plug.Good value for money,easy for replacement.2 Coil Magneto stator ignition coil scooter compatible for 50cc 70cc 90cc 110cc 125cc Taotao Kazuma SSR Baja ATV Quad Dirt Kick Bike 4 Wheeler..
Check Stock

Blower Motor Wiring Harness - Replaces 15-75221, ‎22957044, 1588735 - Compatible Replacement for Cadillac, Chevrolet, GMC & Hummer Vehicles - 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014

  • ...nects your vehicle’s blower motor to the resistor or fan control module. Over time, the factory harness fails, melts or gets corroded resulting in power loss or incorrect flow of electricity causing your AC to fail. This new harness is Designed to reduce amperage draw and harness melting that may occur to factory harnesses..
  • Compatible Replacement for Cadillac, Chevrolet, GMC & Hummer Vehicles - 2007-2014 Escalade | 2007-2014 Escalade ESV | 2007-2013 Escalade EXT | 2007-2013 Avalanche | 2007-2013 Silverado 1500 | 2007-2014 Silverado 2500 HD | 2007-2014 Silverado 3500 HD | 2007-2014 Suburban 1500 | and more. See below for all vehicles..
  • Replaces Part# 15-75221, ‎22957044, 15887352 commonly found on popular Silverado, Sierra, AValanche and Suburban models including years 07, 08, 09, 10, 11, 12, 13, 14. The blower motor wiring harness can easily be located attached to the blower motor of your vehicle..
  • OEM Fit, Quality, Finish - This blower motor wiring harness features While this is not a genuine OEM part, it is a direct replacement and it will appear, fit and work like the factory part. If your blower isn’t working, no air coming out or it is intermittently not working there might be a problem with your blower motor wiring harness..
Check Stock

EXERAUO Trailer Wiring Harness Kit, 4 Pin Flat 4 Wire Trailer Wiring Connector, 25ft & 4ft Wishbond Trailer Light Kit 4 Wire Plug Connector Trailer Light Wiring for Utility Trailer Lights

  • 4 Pin Flat Trailer Wiring Harness Kit: Made of high quality materials and undergoes strict quality assurance to provide lasting performance and reliability..
  • 25ft male& 4 ft female trailer wiring Extension: Designed with 18 AWG Color Coded Wires, for safe simply wiring.suitable for trailers under and over 80″ in width.
  • Color coded wires: Plugs into the 4-way flats with color coded wire to help with installation: White – ground, Brown – tail lights, Yellow – driver side stop/turn, Green – passenger side stop/turn..
  • 25 ft harness kit: This trailer harness includes two wiring harnesses with four flat connectors for ease installation and avoid the wire becoming knotted during installation, reduce corrosion and wiring time.
  • To make sure our sincere customers have the best buying experience, we provide 30-day return/ replacement service.If you are not satisfied with the product, please contact us, we will refund you unconditionally..
Check Stock

Spec-D Tuning Jdm Black Euro Style Tail Lights New Compatible with Scion Tc 2004-2007 L+R Pair Taillight Assembly

  • ✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!.
  • ✔️ DOT and SAE Compliant. Made by an ISO Certified Manufacturer using Materials that meet or Exceed OEM Requirements!.
  • ✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!.
  • ✔️ 30 Days Refund & 90 Days Defective Item Replacement Warranty! Any Issues With Your Item Please Call/Email Us and We Will Help You!.
  • ✔️ FITMENT: Compatible with Scion TC 2005-2010 models (Require OEM tail light wiring harnesses for installation)..
Check Stock