Categories

Best Lightweight Electrode Clamp

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer ....
Check Stock

SP Bel-Art Flexible Gooseneck Arm for F18317-1000 Electrode Holder (F18315-0000)

  • Molded of chemical and corrosion resistant acetal copolymer links with ball-and-socket joints.
  • Arm can hold and position a pH meter or similar tools.
  • One end is designed to accept the F18317-1000 Electrode Holder while the other has a 12.7mm (1/2") diameter stainless steel pin for attachment to a clamp or base.
  • Base and electrode holder sold separately.
Check Stock

ETCR2100A+ Digital Clamp Ground Earth Resistance Tester Meter 0.01Ω-200Ω

  • Clamp Size:Φ1.26"(32mm),Clamp table size: 10.24"×3.54"×2.6"(260mm × 90mm × 66mm).
  • Structural Feature：Clamp CT,and can measure the ground fault which can not be measured by traditional method.
  • Measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster.
  • Multi keyboard operation panel, new alarm and save functions.
  • This Clamp meter widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc.
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock

HITBOX TIG Welder 110V 220V 200A 2T 4T TIG Stick MMA IGBT Inverter High Frequency Dual Volatge Welding Machine (Model: TIG200A)

  • Ship from the United States. Dual Volt 200 amp IGBT Tig Stick Welder with tig torch, earth clamp, electrode holder and gas tube..
  • Adopt newly IGBT inverter technology, Compared to MOS Technology, greatly reduce breakdown.
  • Inverter frequency up to 100KHZ, the technology is mature, stable performance.
  • TIG Welding thickness 0.5-6mm, and application of electrode diameter (MM): 2--3.2mm.
  • Easy arc ignition, litter spattering, stable current and good shaping.
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

Lincoln 225A Gas Engine-Driven Welder K3458-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

Lincoln TIG Kit for Power MIG 210MP K3690-1

  • 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
  • ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
  • power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
  • Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
  • Spool Gun Ready to MIG Aluminum with optional Spool Gun.
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

Lincoln Electric Inverter ARC 120 K2789-2

  • Century DC Inverter stick welder 70 Amp welds up to 1/4 in. This 17 lbs. welder has 120-Volt input. One-year warranty parts and labor. 20% Duty cycle..
  • 6 ft. input cable with attached 15 Amp plug.
Check Stock

Hobart 500570 Stickmate 160i

  • Easy to carry & store. Weighs under 20 lbs.
  • 10 ft. (3 m) electrode cable with heavy- duty holder.
  • Easy, quick, reliable starts with hot start technology.
  • Up to 160A output. Welds up to 5/32 inch mild steel.
  • 120V/240V input power. Allows connection to 120 or 240V receptacles without tools.
Check Stock

SUNGOLDPOWER ARC MMA 200A Welder Dual 110V 220V IGBT Hot Start Welding Machine DC Inverter Welder 200 AMP LCD Anti-Stick

  • Please Note: some cheaper welders are only about 7-10lbs, looks like a toy.
  • however, SUNGOLDPOWER welder is heavier than others, because SUNGOLDPOWER welder is full-bridge welder (many cheap welders are half bridge welder), we use more high quality components to support its perfect working and long-life time..
  • 2.Advanced control module IGBT dual 110V and 220V, improves the performance of the welding machine. IGBT MMA welder adopting advanced full bridge IGBT inverter technology.
  • 3. Anti-sticking preventing against over loading the unit easing removal of the electrode,thermostatic control,fan cooled carrying strap and handle..
  • 4. Hot start, arc force overload protection：over-voltage protection, under voltage protection, over current protection, over load protection.
  • 5. Supplied complete with AC Plug，electrode holder and cable, earth clamp and cable, Complete package..
Check Stock