Categories

Best Line Level Input

Pyle PLVHL70 2-Channel High-Level To Low-Level Converter with 12V Remote Turn-On

  • RCA FUNCTION HIGH TO LOW: The Converter allows you to get RCA line level outputs from your high-level output device. It also can convert the high-voltage signal output of the amplifier or speaker to the low-voltage signal, improve sound quality.
  • ADJUSTABLE ATTENUATION: Provide the level gain adjustment. Use the adjustment rotate button, you can adjust the bass down without having to pull over and manually adjust the input level of the amplifier to the minimal one, very convenience.
  • HIGH-QUALITY SOUND: No need to worry about interrupted sound, static or loss of quality during an important event because this cable is made with highly durable construction and delivers premium performance without noise, static, or buzzing.
  • EASY TO INSTALL: Provides amplifier remote turn-on output w/out removing car stereo. Just connect the wire between the speaker & the amplifier. Red input.
  • Connect to the amp line of the right channel. White input.
  • MAXIMUM INPUT POWER: Constructed from durable aluminum alloy. 45W per channel.
Check Stock

Rockville RPG2X15 Powered Bluetooth Mixer+(2) 15' Speakers+Stands+Wireless Mics

  • ...e output to connect a subwoofer or more speakers. USB / SD Input. MP3 Playback. LCD Display. Bluetooth connectivity. 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 8 balanced XLR and microphone inputs. Tape/CD Line inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control.
  • Phantom power for condenser mics!. 5 Band graphic equalizer. Line Out for connection to external amplifier. Return input for connection of external effects processors. Record Out for taping. RF interference protection on all inputs. Aux Send Output : -10 dBv nominal, 1k ohms. Tape Rec Output : -10 dBv nominal, 1k ohms. Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization : +/- 15 dB @ 5 kHz.
Check Stock

Rockville RPG2X15 PA System Mixer/Amp+15' Speakers+Stands+Mics+Bluetooth+Cart

  • ...e output to connect a subwoofer or more speakers. USB / SD Input. MP3 Playback. LCD Display. Bluetooth connectivity. 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 8 balanced XLR and microphone inputs. Tape/CD Line inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control.
  • Phantom power for condenser mics!. 5 Band graphic equalizer. Line Out for connection to external amplifier. Return input for connection of external effects processors. Record Out for taping. RF interference protection on all inputs. Aux Send Output : -10 dBv nominal, 1k ohms. Tape Rec Output : -10 dBv nominal, 1k ohms. Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization : +/- 15 dB @ 5 kHz.
Check Stock

2 Rockville RSG15.24 Dual 15 3000w 3-Way DJ/Pro PA Speakers+Powered Mixer w/USB

  • ...ne output to connect a subwoofer or more speakers. USB / SD Input. MP3 Playback. LCD Display. Bluetooth connectivity.
  • 350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 8 balanced XLR and microphone inputs. Tape/CD Line inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Phantom power for condenser mics!. 5 Band graphic equalizer. Line Out for connection to external amplifier. Return input for connection of external effects processors.
  • Record Out for taping. RF interference protection on all inputs. Aux Send Output : -10 dBv nominal, 1k ohms. Tape Rec Output : -10 dBv nominal, 1k ohms. Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization : +/- 15 dB @ 5 kHz. Protection Circuit : Power on Mute delay time : 2 seconds. 110/220 volt switchable. Built in FM radio. Mixer weight: 26.4 lbs. Mixer Dimensions: 11.6" x 19.6" x 7.6". Microphones :.
Check Stock

Lepy LP-168S Hi-Fi Stereo Audio Amplifier

  • Featuring Philips audio power ICs, for strong output power and pure tone.
  • Dedicated subwoofer output with independent level and crossover control.
  • Separate bass, treble, and volume controls.
  • Stereo line-level input on rear and 3.5mm stereo line input on front.
  • Short-circuit and temperature protection.
Check Stock

PAC SNI-1 RCA Ground Loop Signal Isolator Car Accessories

  • Line out converter for factory radios with 2 to 30-watts per channel.
  • Accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.
  • Linear 20 to 20,000Hz output based on input signal.
  • Transformer isolated for optimal sound and performance.
Check Stock

Acoustic Audio by Goldwood AA15LBS Powered 15" Bluetooth LED Light Display Speaker with Microphone and Stand

  • Acoustic Audio AA15LBS active 15″ Bluetooth LED speaker with wired mic and stand, 1000W system power, 20hz-20 kHz, 102Db, 2-way design, deluxe 15″ woofer with 2″ tweeter, built in Bluetooth receiver.
  • USB/SD Reader MP3 player, wired microphone with cable, multiple pattern flashing LED light woofer with off switch, FM, remote control for MP3 player, Graphic equalizer, ported for added bass.
  • Female XLR input for wired mic with level control, Female 1/4″ jack input for wired mic with level control, RCA line inputs, RCA line outputs, 3.5mm input, line/MP3 level, echo and Master controls.
  • Rugged cabinet with rear wheels and handles, adjustable pole mount, size is (H x W x D) 27″ x 16″ x 14″, speaker stand has safety lock pin and rubber feet, power cable and full instructions included.
  • Use for DJ speaker, pa speaker, Karaoke speaker, live sound speaker, fixed installation speaker, studio monitor, home Audio, This Listing and price is for 1 acoustic Audio active speaker.Impedance:4 Ohm.
Check Stock

8-Inch Low-Profile Amplified Subwoofer System - 600 Watt Compact Enclosed Active Marine Underseat Car Subwoofer with Built in Amp, Powered Car Subwoofer w/Low & High Level Inputs - Pyle PLMRSBA8

  • 600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your marine music audio system.
  • BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module.
  • LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your marine stereo sound system.
  • HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual.
  • LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source.
Check Stock

Monoprice Commercial Audio 60W Powered Podium Lectern with Built-in Speakers and Gooseneck Microphone

  • Includes gooseneck dynamic microphone and gooseneck LED lamp.
  • Line level RCA input to connect external devices.
  • Balanced 1/4" dynamic microphone input for external microphones.
  • Line level RCA outputs for recording presentations.
Check Stock

PyleUsa 10-Inch Low-Profile Amplified Subwoofer System - 900 Watt Compact Enclosed Active Marine Underseat Car Subwoofer with Built in Amp Powered Car Subwoofer w/Low & High Level Inputs - PLMRSBA10

  • 900 WATT POWER: 10" Amplified Low Profile Subwoofer System offers a maximum power of 900 watts. It lets you pump out some great low-frequency bass volume to enhance the party vibe making it a great addition to your marine music audio system.
  • BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module.
  • LOW PROFILE:With a height of just 3",it's a perfect solution when space is an issue,it can easily fit under the seat of most vehicles!Total dimension is 14.2”x11.2"x3” & includes mounting hardware. A great addition to your marine stereo sound system.
  • HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual.
  • LOW-LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low-level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal sources.
Check Stock

PyleUsa 10-Inch Low-Profile Amplified Subwoofer System - 900 Watt Compact Enclosed Active Underseat Car Audio Subwoofer with Built in Amp Powered Car Subwoofer w/Low & High Level Inputs - PPLBX10A

  • 900 WATT POWER:10" Amplified Low Profile Subwoofer System offers a maximum power of 900 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your car music audio system.
  • BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module.
  • LOW PROFILE: With a height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 14.2”x11.2"x3” & includes mounting hardware. A great addition to your car stereo sound system.
  • HIGH-LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual.
  • LOW-LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low-level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal sources.
Check Stock

Soundavo PSB-300 Class D Subwoofer Amplifier with Crossover/Phase Control 300W Max / 150W RMS

  • ...red for home audio and home theater audio systems.
  • ✅【Adjustable Low Pass Filter & Phase Controls】Allows compensation for subwoofer location relative to the main speakers, can be adjusted from 0° to 180°. The Low Pass Filter from 35Hz to 180Hz..
  • ✅【Easy Connection to Any System】Features a stereo/mono line level audio input that can receive full band audio from any audio amplifier, receiver or preamp or an LFE input, also features a stereo speaker level input/outputs connector and passthrough for easy to work with older amplifier/home theater receiver do not have line level outputs..
  • ✅【High Efficient Class D Technology & Compact Design】Unique solid and beautiful modern compact chassis exterior design for easy place on your music media stand/cabinet, fits anywhere you need it. The cool running light weight Class D amps are quiet and can run all night without over-heat issue..
  • ✅【Audio-Sensing & 12VDC Trigger】Once the audio signal hits the PSB-300 line or speaker level inputs, the amp will instantly turn ON. The amp will also turn itself OFF after 5 minutes if no audio signal has been detected. There is also a 12VDC Trigger that will turn the PSB-300 ON when 12-24VDC is applied and turn the amp OFF when the voltage is removed..
Check Stock

Rockville 15\ Church Speakers+Mixer+Stands+Mics+Bluetooth 4 Church Sound Systems

  • ...0.28". Mixer. LCD Display. USB / SD Input. MP3 Playback. Built-In FM Radio Tuner. Bluetooth connectivity.
  • 200 Watts RMS / 400 Watts Program Power / 800 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 4 balanced XLR microphone inputs. Tape/CD Line inputs. 10 total inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Line Out for connection to external amplifiers. Return input for connection of external effects processors. Record Out for taping.
  • RF interference protection on all inputs. Aux Send Output: -10 dBv nominal, 1k ohms. Tape Rec Output: -10 dBv nominal, 1k ohms. Input lmpedance: Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization: +/- 15 dB @ 5 kHz. 3 Band equalizer: Bass: +/- 15 @ 60 Hz Mid: +/-15 @ 1 kHz Treble: +/- 15 @ 10 kHz. Protection Circuit: Power on Mute delay time: 2 seconds. Microphones. Rockville RMM-XLR Dynamic Microphone. Professional 10 FT XLR Cables Included.
Check Stock