Kwikset Compatible Top Pins and 50 Each Bottom Pins Rekey Kit Rekeying Set
- REKEY YOUR LOCKS – Prime-Line E 2402 re-keying kit allows you to rekey all your locks to one, pre-cut key. Note: This kit is not designed to re-key....
- INCLUDES – Re-Key a Lock Kit includes 3 pre-cut keys, pins, special tools and simple-to-follow instructions..
- FOR PIN STYLE LOCKS – Re-Keying kit works for Schlage brand locks, “C” 5-pin style..
- EASY INSTALLATION – Re-keying your locks is easy with this kit – even a novice can complete the DIY task..
- REQUIRES – Rekeying kit requires original key to lock being rekeyed as part of the re-keying process..
Check StockSlackline Industries Trick Line 50ft
- Complete kit includes a ratchet with safety lock and main line with a sewn loop on one end. The advertised TrueLength refers to the length of the main....
- The easy-to-use ratchet comes with 8 feet of webbing and a reinforced loop to firmly anchor and tension the slackline. The handle grip is a soft....
- Custom-designed trampoline-style webbing is made for slacklining and provides extra bounce for dynamic tricks..
- Choose from two options: 50ft and 50ft + Tree Protection and Backup Line included.
- Specifications: - Length: 50ft TrueLength (Length of the main line) - Width: 2 in - Max. tension: 3 tons - Ratchet with safety lock - Ratchet side....
Check Stock
Stainless Steel keg Coupler Ball Lock Posts Adapter,Sankey keg to Ball Lock Quick Disconnect post,Fits to D Type Keg Coupler FPT 5/8 Thread Stainless Steel Gas & Liquid Post for Homebew
- 【Food Grade Material】Made of food grade 304 stainless steel instead of chrome plated , which let our keg coupler adapter kit more healthier/ environmental/anti-corrosion/no rust/durable. 2pcs Silicone gaskets are for free..
- 【Two Way to Identify Gas &Liquid Post】 The Gas Post has a subtle etched line around the top of the base (the liquid post has no etched line).The flaring of the metal on the liquid side is much wider than the gas side.
- 【Quick & Easy To Convert】This Keg Coupler Adapter can combined with ball lock quick disconnect set that will convert the sanke style keg into a Cornelius style Ball Lock keg( easy to toggle between commercial and homebrew beers).
- 【Hand Or Plier To Install】Can install our ball lock keg conversion kit in 5/8 thread S-style &D-style keg coupler to use.You can use hand or the plier to lock each side grooves,then tighten the posts. Don’t over tighten to avoid deforming the washer.
- 【Easy To Clean 】To clean this keg coupler adapter kit , you can infuse the clear water into your beer keg to operate one time just like exporting beer.Don’t suggest you take apart this conversion kit,cuz it is very difficult to reinstallation.
Check StockSlackline Industries Aggro Line 100ft - Tree Protection and Backup Line Included
- Complete kit includes a ratchet with and main line with a sewn loop on either end. The advertised TrueLength refers to the length of the main line alone. Other companies will advertise a kit length that includes the webbing on the ratchet and the main line. Essentially shorting you on your main line!.
- The heavy-duty, long-lever ratchet with 8 feet of static webbing and reinforced loop to firmly anchor and tension the slackline at long distances..
- Custom-designed trampoline-style webbing is made for slacklining and provides extra bounce for dynamic tricks..
- Choose from two options: 100ft and 100ft + Tree Protection and Backup Line included.
- Specifications: - Length: 100ft TrueLength (Length of the main line) - Width: 2 in - Max. tension: 3 tons - Ratchet with safety lock - Ratchet side length: 8 ft - Reinforced loop slings - Instruction Manual included.
Check Stock
Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal
- 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
- Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
- Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
- The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
- Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
- No Worry To Buy: Excellently Sealed, no leaking. We of....
Check StockStadea SWP107K Concrete Wet Polishing Angle Grinder 5 Stone Wet Polisher with Diamond Polishing Pads Kit for Concrete Stone Polishing
- Stadea Wet Angle Grinder, Stone Concrete Polishing Grinder Polisher Countertop Polishing Tools Package kit with Wet polisher, 5" Diamond Polishing....
- Kit includes Stadea Series Standard A Wet set of seven 5" diamond pads for concrete marble surface polishing and stone granite edge polishing. Also....
- Ergonomic grip-size, long, out of core, soft back handle design transfers minimal polisher weight to back handle minimizing back hand fatigue and this....
- In-built water quick-connect to standard water hose, Water pressure control, Water Stopper, Extra-long water line, under-polisher water flow line does....
- Arbor lock for easy release of tool accessories, Soft-start, Polisher one-push power start & lock switch for ease of use, splash guard with vacuum....
Check Stock
F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems
- {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
- {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
- {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
- {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock. MC12020.
Check Stock
KWODE Commercial Wall Mount Faucet Installation Kit, Wall Mount Kitchen Faucet Mount Kit Backsplash Mount Set for Stainless Steel Commercial Kitchen Prep & Utility Sink
- Commercial Faucet Installation Kit:This faucet installation kit connected size is G1/2 male(also called 1/2 IPS), not 1/2” NPT, fitting wall commerical faucets with G1/2 female end..
- LEAK-PROOF DESIGN: It is one-piece construction for no leaking, plastic washers and rubber washers are used together for better leak-proof effect..
- EASY TO INSTAL :Connect the longer end to the back of wall mount faucet,the shorter end to water line,aganist washes at the back of stainless steel sink by lock nuts to secure faucet.(tips please use the water tape to avoid leakage).
- INSTALLATION KIT FOR BACKSLASH MOUNT FAUCET:This elbow adapter with 1/2 IPS male ends is designed to install a wall mount commerical faucet on the backsplash of stainless steel commercial kitchen prep & utility sink, which can save you space and increase the service life of the water supply line..
- SOLD IN PAIR: Comes with 90 degree angled elbow joint x 2, lock nut x 2, stainless steel washer x 2 and rubber washer x 2..
Check Stock
Prime-Line Products E 2294 Mortise Keyed Brass Knob – Perfect for Replacing Broken Antique Lock Sets and More Fits 1-3/8 inch-1-3/4 inch Interior Doors single pack
- BREPLACe ANTIQUE MORTISE LOCK SETS – The vintage look of the Prime-Line E 2294 Mortise Lock Assembly Kit is a great match for the old lock sets found in period homes. Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. .Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit..
- EASY INSTALLATION – Installation is quick and easy, and all mounting screws are included. The mortise lock easily slides into the existing door pocket for an fix for a broken lock. It has a 2-3/8” backset with a 9/32” square spindle drive that accepts a maximum spindle size of 1/4”..
- STEEL WITH BRASS-PLATED FINISH – The E 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish. The kit includes a latch and deadbolt strike with fasteners (door knobs, square spindle, spare keys and trim plates sold separately) and two skeleton-style keys..
- LEFT OR RIGHT-HANDED INTERIOR DOORS – The mortise caselock ships handed (to close in a certain direction) but the latch can easily be reversed for opposite swinging doors..
- INSTALLATION TIP – Although the square drive on the latch has a 9/32” opening, it will only accommodate 1/4....
Check Stock
Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System
- {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
- {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
- {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
- {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
- {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock【2 Pairs】MRbrew Ball Lock Disconnect Set, Home Brew Ball Lock Keg Fittings with MFL Thread Swivel Nuts, Corny Keg Fittings with Stainless Steel 5/16'' Gas & 1/4'' Liquid Barbs & Extra 4 Hose Clamps
- 1.Include: Ball Lock Disconnect Set and Beer Keg Coupler Adapter.
- 2.Material: PBT Material for Ball Lock Disconnect Set and Stainless Steel for Keg Coupler Adapter and Swivel Nuts.
- 3.Easy to Use, the Ball Lock Disconnect can Connect Sankey Keg Coupler Adapter Directly.
- 4.Clear to Identify, the Gas Post has a Deep Subtle Etched Line, the Liquid Post has no Line, it will be convenient to switch between commercial kegs and hombrew co2 tanks with this Sankey to Ball Lock disconnect conversion kit.
- 5.Quality Guarantee, Money Return or Free Replacement..
Check Stock
Line Lock Roll Control Brake Lock,Universal Launch&line lock kit for brakes Electric Solenoid Kit(Black)
- Brake line lock can be widely used in various models which allows the front brakes to lock independently of the rear brakes via a switch. It also allows the front brakes to be locked and the rear brakes to be open, so that the driver to spin the rear wheels without wasting the rear brakes..
- Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.
- Each kit includes a inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter and 3pcs mounting screws. High quality stainless steel valve assembly gives it strong sturdiness.Works with 12 -24 volt electric systems.
- Fully-enclosed epoxy-molded electrical coil makes it reliable.
- The attractive aluminum fin shell enables it to cool down.
- The wider lightweight base provides better mounting stability.
- besides, it has extra threaded port for brake line pressure gauge..
- ATTENTION: This line lock is to be installed in the front braking system (for rear wheel drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for....
Check StockPrime-Line E 2400 Re-Keying Kit – Re-Key a Lock Kit with Pre-Cut Keys for Rekeying all your Locks to One Key, For Kwikset Brand Locks, 5-Pin Style Locks
- REKEY YOUR LOCKS – Prime-Line E 2400 re-keying kit allows you to rekey all your locks to one, pre-cut key. Note: This kit is not designed to re-key locks to any other existing key, but rather only to the pre-cut keys included with each kit..
- INCLUDES – Re-Key a Lock Kit includes 3 pre-cut keys, pins, special tools and simple-to-follow instructions..
- FOR PIN STYLE LOCKS – Re-Keying kit works for Kwikset brand locks, 5-pin style..
- EASY INSTALLATION – Re-keying your locks is easy with this kit – even a novice can complete the DIY task..
- REQUIRES – Rekeying kit requires original key to lock being rekeyed as part of the re-keying process..
Check Stock
