Categories

Best Line Output

Monoprice 602520 Microphone Stand with Boom

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Fosi Audio Box X1 Phono Preamp for MM Turntable Mini Stereo Audio Hi-Fi Phonograph/Record Player Preamplifier with 3.5MM Headphone and RCA Output with DC 12V Power Supply

  • 【Converts Phono Signals】: Compact ultra-low noise phono turntable preamp that converts phono signals to line-level signals. Designed with a grounding post to protect your turntable..
  • 【Features Power Switch & 3.5MM Headphone Output】: The unique power switch button design is very convenient to use. You can enjoy high-quality music with headphones through the 3.5 mm headphone output. Note: RCA line output and AUX headphone output can be output simultaneously..
  • 【3.5MM / RCA Output】: BOX X1 supports MM turntable input, 3.5MM headphone output, and RCA line output for powered speakers. Note: You can connect a power amplifier through the 3.5MM or RCA output, then connect the passive speakers..
  • 【MM Phono Preamplifier & DC12V Power Adapter】: Output Voltage Level: 2V max (P-P) at 10K Ohms, SNR: 70dB, THD: ≤0.08% @ 1kHz and 3mV, Frequency Response: Standard RIAA. Equipped with DC12V high-quality power supply..
  • 【What You Get】: BOX X1 phono preamp x1, 12V power adapter x1, User manual x1, our worry-free 18-month warranty, and friendly customer service..
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Fool 4 You

  • 【Converts MM Turntable Signals】: BOX X1 compact ultra-low noise phono preamp converts phono signals to line-level signals. Designed with a....
  • 【MM Phono Preamplifier with DC12V Power Adapter】: Output Voltage Level: 2V max (P-P) at 10K Ohms, SNR: 70dB, THD: ≤0.08% @ 1kHz and 3mV,....
  • 【RCA Output & 3.5MM Headphone Output】: BOX X1 supports MM turntable input, 3.5MM headphone output, and RCA line output for powered speakers. You....
  • 【Amplify Vinyl Records to Interface with Your Home Stereo System】:The built-in low noise phono preamp circuitry is highly accurate and precisely....
  • 【What You Get】: BOX X1 phono preamp x1, 12V power adapter x1, User manual x1, our worry-free 18-month warranty, and friendly customer service..
Check Stock

2-Channel Bluetooth Amplifier and Pair of 5' Waterproof Speakers

  • Bluetooth streaming audio (A2DP) and control (AVRCP), Front USB with MP3/WMA playback, Front HDMI input for pass through to HDMI output, HDMI Input Pass Through Rear HDMI Output.
  • HDMI pass thru (plays HDMI audio input over speaker and low level outputs), Digital AM/FM Tuner/30 Preset stations (12 AM/18 FM), 2 Zones / 4 Speakers Output.
  • Rear AUX A/V input (RCA jacks), Rear AUX Audio Output (RCA), Subwoofer Audio Output (RCA), Mono subwoofer line level audio output (rear RCA jack).
  • Electronic Bass, Treble, Balance and Fader Controls. White dimmable LED backlit controls, Stereo line level audio output zone A (rear RCA jacks), 24 Watts maximum, Clock with alarm and sleep timer.
  • Mounting Dimensions: 96.8mm (W) x 73.8mm (D) x 99.9mm (H). 20-PIN Speaker Wire Harness, Installation Hardware and Wireless Remote Control Included.
Check Stock

Monoprice Above Fireplace Height Adjustable Swivel TV Pull Down Mantel Wall Mount for LCD LED Plasma Screen Displays 40 Inch to 63 Inch, Maximum weight 70lbs

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

DEVMO 5PCS DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-Voltage Generator

  • ★input voltage: DC 3 V to 6 V. Input current: 2 A - 5 A..
  • ★High pressure type: the type of pulse current.Output voltage: 400000 v(Please pay attention to safety)..
  • ★High pressure discharge distance between: 10 mm - 20 mm..
  • ★The output high voltage wire length: 100 mm.Input power cord length: 100 mm (the red line is positive)..
  • ★Wiring: Red and green power connection red line:"+" green line "-" output : the other side ,same color cable..
Check Stock

Lepy LP-168S Hi-Fi Stereo Audio Amplifier

  • Featuring Philips audio power ICs, for strong output power and pure tone.
  • Dedicated subwoofer output with independent level and crossover control.
  • Separate bass, treble, and volume controls.
  • Stereo line-level input on rear and 3.5mm stereo line input on front.
  • Short-circuit and temperature protection.
Check Stock

The Puppy Primer

  • Four-channel recording up to 24-bit, 96 kHz. Built-in stereo X/Y microphones, up to 140 dB SPL.
  • 2 XLR/TRS inputs with locking connectors. Records directly to SD/SDHC cards up to 32 GB.
  • 4-in/2-out USB audio interface. Monaural speaker: 400 mW 8 Ω.
  • Line/phone-LINE Output load impedance- 10 kΩ or more. LINE rated output level: -10 dBu. PHONE- 20 mW + 20 mW (into 32Ω load).
Check Stock

Manual Pulse Encoder, Portable High Efficiency CNC Pulse Generator for Numerical Control System

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

Manual Pulse Encoder, Portable Smoothly Operation CNC Pulse Generator 4 Terminal for Grinding Machine

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock

CNC Pulse Generator, Manual Pulse Encoder 100PPR 4 Terminal Smoothly Operation for Grinding Machine

  • Long Line Driver Output: The signal output of this CNC encoder is two way quadrature, the output method is long line driver output.
  • High Efficiency: The output pulse of this manual pulse generator is 100 PPR, has high working efficiency with stable performance.
  • Simple Operation and Installation: The operation is simple and smoothly, will not stuck, and the installation is easy with 4 terminal connection.
  • Sturdy and Durable: The electronic CNC encoder is made of high quality aluminum alloy material, which is sturdy and durable.
  • Wide Usage: This manual pulse encoder is widely used in CNC numerical control systems, such as CNC lathes, CNC grinding machines, CNC milling machines, engraving machines, etc..
Check Stock