Drill, Press - Wood Drill Press: Bore One Hole, Fast Speed, Construction Drills - Electric

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

L-faster 4WD Electric Mountain Skateboard Conversion Kit 4 Wheels Drive Off-Road Skateboard with LCD Display Remote

  • Modification kit: We provide a complete set of accessories including motor wheel, battery, circuit board, front wheel, remote control, wrench, charger, handle charging data cable. You can modify your own four-wheel skateboard with a personalized panel..
  • Easy to follow instructions, detailed modification steps for skateboarding novices to easily complete the modification..
  • Dndurance: Smart motherboard, with smart induction boot, automatic shutdown, power recovery system, linear brake and other functions. Imported high-quality lithium battery with overcharge, overdischarge and short circuit protection..
  • Strong power: full-magnet steel motor wheels, strong power and high conversion. Brushless power motor, low interference, low noise, long service life..
Check Stock

WEN 4214 12-Inch Variable Speed Drill Press,Orange & Forney 20857 Tap Magic Industrial Pro Cutting Fluid, 4 oz

  • Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Product 2: Use for tapping, threading, drilling and reaming.
  • Product 2: Use on ferrous metals and non-ferrous alloys.
  • Product 2: Apply directly on the work surface.
Check Stock

WEN 4214 12-Inch Variable Speed Drill Press,Orange & 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

  • Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Product 2: Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc.
  • Product 2: Belt tilts anywhere from 0 to 90 degrees.
  • Product 2: Sturdy cast iron base prevents any heavy vibrations.
  • Product 2: 4.3 Amp motor provides up to 3600 RPM.
Check Stock

Machine Light,Led Work Light, 30W Folding Aluminum Alloy ong Arm Lamp for Lathe Milling Drill Press Industrial Lighting Reading,Cool and warm light available

  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Spindle Travel of 3-1/8″ with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • 9-1/2 x 9-1/2″ cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2″.
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8″ keyed chuck & key, tools for assembly.Drill press Height from the Floor to the top: 37 inch.
Check Stock

NU3VITA Electric Skateboard DIY Modification Kit, Single-Drive Hub Motor Controller Battery Box Longboards DIY Kit, Suitable for Entry-Level Skateboard Modification Without Board - 4.4AH Dual Drive

  • Modification kit: We provide a complete set of accessories including motor wheel, battery, circuit board, front wheel, remote control, wrench, charger, handle charging data cable. You can modify your own four-wheel skateboard with a personalized panel..
  • Easy to follow instructions, detailed modification steps for skateboarding novices to easily complete the modification.
  • Dndurance: Smart motherboard, with smart induction boot, automatic shutdown, power recovery system, linear brake and other functions. Imported high-quality lithium battery with overcharge, overdischarge and short circuit protection..
  • Strong power: full-magnet steel motor wheels, strong power and high conversion. Brushless power motor, low interference, low noise, long service life..
Check Stock

WEN 4214 12-Inch Variable Speed Drill Press,Orange & DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block

  • Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Product 2: Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth).
  • Product 2: Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches.
  • Product 2: Fits any drill press table between 5 and 16 inches in width.
  • Product 2: Designed to fit the entire WEN Drill Press Series.
Check Stock

VEVOR Linear Guide Rail, 2PCS HGR20-1000mm Linear Slide Rail + 1Pcs RM1605-1000mm Ballscrew with BF12/BK12 Kit, Coupling, Slide Blocks Linear Guide Rail Set for DIY CNC Routers Lathes Mills

  • 1000MM HGR20 Linear Guide Rail: This linear guide rail set includes 2 pieces of HGR20-1000mm linear guide rail, 4 blocks, 1pcs RM1605-1000mm ball screw with end machined, 1pcs RM1605 ball nut, 1 set BF12/BK12 end support, and 1pcs plum coupling..
  • High-Quality Steel Material: Linear guides are made of carbon steel, linear bearings are GCr15 bearing steel. Surface chrome plating treatment beautiful anti-rust, hardness can as high as HRC62, more durable. Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient..
  • Premier Linear Guiding System: Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient..
  • Ease to Install: Steel support rail with pre-drilled holes for ease of mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance. The ballscrew movement without stick-slip effect less heats up, less drive power is required..
  • Wide Application: The CNC linear rail is widely used in automatic and precision measuring equipment, such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also, applicable for larg....
Check Stock

ECO LLC Linear Actuator Controller DC8-30V Wireless Remote Motor Control Switch Kit 5A

  • Application:Our Linear Actuator Controller Suitable for Different Kinds of Linear Actuator..
  • It is a forward-reverse controller, which enables the motor moving forward --stop-- backward,clockwise--stop--counterclockwise..
  • Remote control comes along with forward-reverse controller enables distance controlling..
  • Widely input voltage for 8-30V Motor , high-current output (max output is 5A), Remote control distance can reach 5 meters ..
  • Can only be used with 1 single linear actuator.(Linear actuator Not conclude).
Check Stock

Swisher 18840 4-Way Log Splitter Wedge

  • ...ight horizontal full beam and steel wedge log splitter design is built to be portable with fast and easy set up for anywhere nature takes you.
  • Complete with 8” inch Sturdy transport wheels, allowing for smooth maneuvering for easy transportation from site to site.
  • EFFICIENT - Precision gear pump and brushless induction motor with copper windings allow for this Log Splitter to produce constant splitting force, providing a smooth linear power curve to help avoid clunky performance during operation.
  • Effortlessly complete large splitting jobs with only a 16-second cycle time reset in-between log splits.
  • ECO-FRIENDLY - (Green and Safe), unlike gasoline-powered devices, electric-powered units produce no smog/fumes/emissions and are both gas and exhaust free.
  • Can be used on the ground or on a workbench, outside and inside, while being quieter ONLY producing 65dB noise during operation.
  • SAFETY and PROPER USE - Always operate the Log Splitter with eye and hand protection, utilize the controls and shut off/on switch as needed.
  • This log splitter is electric powered and does not require fuel to operate.
  • (NOTE: HYDRAULIC FLUID NOT INCLUDED, AW32 Recommended).
Check Stock

Befenybay 50mm Effective Travel Length Mini Linear Rail Guide Lead Screw T6x1 with NEMA11 Stepper Motor for DIY CNC Router Parts X Y Z Linear Stage Actuator

  • DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V..
  • MAXIMUM LINEAR SPEED: The maximum linear speed of lead screw worm drive stepper motor is 25mm per second..
  • APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc..
  • PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller..
  • NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power..
Check Stock

Grizzly Industrial G0710-1 HP Wall Hanging Dust Collector

  • TEFC Induction Motor: Benefited from the Totally Enclosed, Fan-Cooled cover design and advantage of the induction motor, our motor is significantly more durable, lower noise, and maintenance-free than the brushless motor, if you are not an occasional user, and want a shop dust collector for woodworking, this is the one for you.
  • POWERFUL MOTOR: The dust collector is equipped with a 1HP powerful induction motor with 6.5AMP 550CFM airflow, the steel impeller supply 550 CFM airflow.
  • TWO WAYS TO USE: Our dust collector can be mounted on the wall and it has wheels with a brake for easy movement and fix position.
  • BETTER WITH 2 MICRON DUST BAG: To ensure a better experience, we suggest matching with our 2-micron filter bag when you use this dust collector.
  • INCLUDED REMOTE CONTROL: This updated dust collector has a 49 FT remote control so that you can control your dust collector more conveniently and improve your work efficiency.
Check Stock

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

  • 【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion..
  • 【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver)..
  • 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value)..
  • 【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down..
  • 【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc..
Check Stock