Categories

Best Linear Shaft

Dopro 5pcs Linear Guitar Pots Volume 500K Electric Guitar Large Pots 24mm Base with Long Split Shaft Guitar Potentiometer B500K

  • Audio Taper (A) increases or decreases in a sloped curve fashion.
  • Linear Taper (B) increases or decreases in a linear fashion.
  • Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference..
  • Very hot quality metric guitar pots for most electric guitars.
  • Package includes 5pcs Guitar pots with nuts and washers.
Check Stock

Linear Rail, 400mm LML9B 9mm Width Guide Rail Miniature Linear Motion Rail Linear Slide Rail Linear Rail Carriage+2pcs Slide Blocks

  • [High Strength]: Chrome plating linear shaft, high hardness, lasting to use..
  • [Linear Rail Shaft]: Standardized processing aluminum alloy sliding block, with strong interchangeability..
  • [Stable Performance]: Built-in high precision linear bearings allows the slide block to move smoothly with little resistance..
  • [Durable & Longlife]: Oxidation surface treatment makes the sliding block beautiful, rustproof and more durable..
  • [Simple Installation]: The linear slide rail has pre-drilled holes for easy mounting..
Check Stock

OCR 1K-500K ohm Potentiometer Kit 35 Sets Knurled Shaft Linear Potentiometer with Knobs Nuts and Washers 7 Values 1K 5K 10K 20K 50K 100K 500K 3 Terminal Rotary Potentiometer

  • ✅ Top adjustment type and knurled shaft single linear 3 terminal 7 values 1K 5K 10K 20K 50K 100K 500K Ohm rotary potentiometer..
  • ✅ Linear knurled shaft potentiometer. Shaft diameter:6mm, shaft length:17mm.
  • Mounting thread diameter:6mm, base size:16*7mm.
  • ✅ Potentiometer kit offers 35pcs potentiometer knob caps. 300 degree rotary knob for easily control the potentiometer..
  • ✅ Top adjustment type and knurled shaft for easy operate in daily use time. Stander round shaft can be push on potentiometer easily..
  • ✅ Taper potentiometer used for volume control of audio sets, car radios, amplifiers, mixers, synthesizers and other appliances. For electronic....
Check Stock

2PCS SBR16 Linear Rail Set Included 2Pcs Linear Motion Guides with Linear Bearings 2000mm(79’’) and 4Pcs SBR16UU Blocks for Automated Machines and Equipments

  • 【Packaged】Included 2PCS SBR16 linear rail with bearings 2000mm(79’’) Length and 4PCS SBR16UU blocks. Rail shaft diameter is 16mm(0.63’’)..
  • 【Material】Made of premium carbon steel rail shaft and aluminum alloy support. Rust-resistance,more durable for use..
  • 【High Precision Making】Compared with other linear bearing,our linear bearing is more smooth and no burr on surface with precision treatment.The bearing blocks is accurately fit to the linear bearing,slide smooth and stable..
  • 【Application】Make good performance for automation machine,such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment..
  • 【5 Stars Customer Services】Any problems about our linear rail ,our professional team will help you solve it in the first time after you contact us..
Check Stock

OCR 1K-1M ohm Potentiometer Kit, 45 Sets Single Linear Potentiometer with Knobs, Nuts and Washers,9 Values 1K 5K 10K 20K 50K 100K 250K 500K 1M 3 Terminal Rotary Potentiometer

  • ★Top adjustment type and knurled shaft single linear 3 terminal 9 values 1K 5K 10K 20K 50K 100K 250K 500K 1M rotary potentiometer..
  • ★Single linear knurled shaft potentiometer. Shaft diameter:6mm, shaft length:17mm.
  • Mounting thread diameter:7mm, base size:16*7mm..
  • ★Top adjustment type and knurled shaft for easy operate in daily use time..
  • ★Taper potentiometer used for volume control of audio sets, car radios, amplifiers, mixers, synthesizers and other appliances. For electronic circuit projects that need adjustable voltage dividers, and for tuning and calibration..
  • ★All the potentiometer are packed in a durable plastic box with compartments that keeps small parts organized..
Check Stock

5 Pcs 10k Linear Potentiometer, 10K Ohm 3 Pin Linear Taper Adjustable Rotary Potentiometer with 7.8 Inch Long Connector Wire Cable and Black Knob Cover Cap for Change Resistance

  • Package Includes: you will get 5 potentiometers with wires (with nuts and washers) and 5 knobs, which are enough to meet your daily use and replacement needs, and you can also share them with family or friends who are in need.
  • Basic Information: product name: single linear rotary potentiometer.
  • Shaft Size: the shaft is 6 mm/ 0.2 inch in diameter and 15 mm/ 0.59 inch in length, and the mounting thread is 7 mm/ 0.3 inch in diameter.
  • You can rotate the shaft to adjust the resistance.
  • Knob Size: it is equipped with a knob for better use, and the black knob is 15 mm/ 0.6 inch deep and 17 mm/ 0.67 inch high.
  • The connector wire is 200 mm/ 7.8 inches long, which can be applied to connect potentiometer and power supply within a certain distance.
  • Wide Application: linear taper rotary potentiometer can be widely applied for photographic lenses, robotics, industrial controls, computer input devices such as trackballs, rotating radar platforms, and controlled stress rheometers.
Check Stock

GM1C-20-B - 20 mm ID Split - Metric Clamp Collar, STL, BO

  • Large opening, not easy to come off during use..
  • Replacement rail shaft stop collar for old or broken one..
  • This set includes 1pc SBR16 stop collar and 1pc SBR20 stop collar..
  • Ideal fixing ring for linear rail shaft linear bearing..
Check Stock

63 pcs A B C, Logarithmic, Linear, Reverse Log. 1K, 5K, 10K, 20K, 50K, 100K, 250K, 500K, 1M Potentiometer Pot Assortment

  • Product Name :Single linear rotary taper poteniometer.
  • Knob Size: 15 x 17mm / 0.6" x 0.67"(D*H).
  • JST-XH2.54 Connector Wire Length：200mm/7.8".
  • Package Includes：3Pcs With wire potentiometer（with nuts,washers） + 3Pcs Knob.
Check Stock

LML9B 9mm Linear Rail Mini Bearing Steel Guide Rail Slide Rail+ Slide Block Variety Length (150mm)

  • Package Content:2 x linear rail shaft rod + 4 x SBR12UU.
Check Stock

Rudedog USA 5003 Lock Collar with Grommet Kit. For 3/4\ Hex Bar only

  • Used for shaft fixing and positioning, SBR linear rail stopper, for DIY CNC Routers Lathes Machine..
  • Design fully engages the shaft. Easily installed.
  • High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong..
  • The shaft can be clamp-on tightly by set screw, the shaft will not be damaged.
Check Stock

CNC Parts 2Pcs SBR20-1200mm Linear Rail Guide with 4Pcs SBR20UU Bearing Block for Fully Supported Linear Rail Length 47.2 inch(1200mm)

  • 1200mm Linear Rail Slider Set: This linear rail set is of 2Pcs SBR20 1200mm/47.2 inch linear rail and 4Pcs SBR20UU Block.
  • Sports performance under high load or long stroke, high precision, smooth moving, low friction, high performance and easy to mount & dismount.
  • Cooperate with open linear bearing to ensure excellent sports performance, and metal linear bearing, its more durable than Plastic linear bearing.
  • Perfect combination of main axle and aluminum alloy support, which nicely stabilizes the original rail. Premier quality bearing blocks moves smoothly while using.
  • Linear motion ball bearing set is widely used for digital 3D coordinate measuring equipment such as precision equipment or special machinery industry. Suitable for kinds of electronic equipment/guide bar, drive shaft, and pillar.
Check Stock

Linear Rail Guide 20mm 2Pcs SBR20-1500mm(59.1 inch) Linear Slide Rail + 4Pcs SBR20UU Bearing Linear Guide Slide Blocks for CNC Machine

  • 1500mm Linear Rail Slider Set: This linear rail set is of 2Pcs SBR20 1500mm/59.1 inch linear rail and 4Pcs SBR20UU Block.
  • Sports performance under high load or long stroke, high precision, smooth moving, low friction, high performance and easy to mount & dismount.
  • Cooperate with open linear bearing to ensure excellent sports performance, and metal linear bearing, its more durable than Plastic linear bearing.
  • Perfect combination of main axle and aluminum alloy support, which nicely stabilizes the original rail. Premier quality bearing blocks moves smoothly while using.
  • Linear motion ball bearing set is widely used for digital 3D coordinate measuring equipment such as precision equipment or special machinery industry. Suitable for kinds of electronic equipment/guide bar, drive shaft, and pillar.
Check Stock

Linear Rail Kits 2Pcs SBR20-2000mm(78.7 inch) Linear Rail with 4Pcs SBR20UU Bearing Linear Guide Slide Blocks for Fully Supported Linear Rail

  • 2000mm Linear Rail Slider Set: This linear rail set is of 2Pcs SBR20 2000mm/78.7 inch linear rail and 4Pcs SBR20UU Block.
  • Sports performance under high load or long stroke, high precision, smooth moving, low friction, high performance and easy to mount & dismount.
  • Cooperate with open linear bearing to ensure excellent sports performance, and metal linear bearing, its more durable than Plastic linear bearing.
  • Perfect combination of main axle and aluminum alloy support, which nicely stabilizes the original rail. Premier quality bearing blocks moves smoothly while using.
  • Linear motion ball bearing set is widely used for digital 3D coordinate measuring equipment such as precision equipment or special machinery industry. Suitable for kinds of electronic equipment/guide bar, drive shaft, and pillar.
Check Stock