Best Lithonia Lighting 2blt4s

Lithonia Lighting LTKCYLD MR16GU10 BN M4 Three Light MR16GU10 Track Kit, Brush Nickel Finish with Clear Glass

Lithonia Lighting DSXF1 P1 40K M4 LED Metal Halide Flood Lights, 150 watts, Dark Bronze (DSXF1 LED P1 40K M4)

• Save Money Instantly - Lowers Electricity Bill By Up To 70% When Replacing 70-150 Watt Metal Halide Flood Lights With 42W Led Fixture. Dlc Qualified For Rebates.

Lithonia Lighting DMCN BNP M6 LED Decorative Metal Cone Shade, 120 Volts, Brushed Nickel

• Only fits Lithonia bullet mini-pendant and sconce with 2-3/4" fitter.
• Purchase of compatible Lithonia bullet mini-pendant or sconce is required for proper use.
• Shades are sold separately from the fitters.
• Ideal for hallways, over seating areas or restrooms.

Lithonia Lighting L48 3000LM RDL MVOLT 40K 80CRI WH CLX LED 48 Inch Strip Light 3000 Lumens Lens 4000K 22W Round Diffuser

• Round lens LED strip light provides 3000 lumens in a very low profile, simple to install design that is perfect for industrial and Warehouse....
• Replaces 2-lamp 17W T8 fluorescent Fixtures and provides more light with a fraction of the energy costs. It was designed as a cost effective option....
• LED strip provides end to end illumination so that when linked together there are no Dark spots.Rated for up to 40 degrees C/104 degrees F so that the....
• Clx LED strips are replacing the popular Lithonia Lighting z strip family. Clx offer better light, efficiency, functionality and appearance.
• 100, 000 hours of light: made from high quality materials, these LED lights are designed to provide Lighting that lasts for up to 100, 000 hours of....

Gruenlich LED Emergency Exit Lighting Fixtures with Two LED Heads and Back-Up Batteries- US Standard Emergency Light, UL 924 Qualified, 120-277 Voltage (2-Pack)

• This low-profile remote is designed with a single, fully adjustable lamp head. These are ideal for outdoor mounting above-the-door and other tight fits at lower mounting heights..
• Weather-proof (WP) remotes are, high-impact resistant thermoplastic, sealed and gasketed, gray finish with fully adjustable lamp heads. For use in damp and wet location areas..
• These remotes are compatible with EU2L REM, ECC REM emergency lighting units..
• UL Listed with approved Lithonia Lighting products. Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes. Wet location listed (ERE WP) -4°F to 122°F (-20°C to 50°C).
• Eight, 1W total, white LEDS per lamp head. For use with 3.6V, 6V, 9.6V & 12V batteries.

Lithonia Lighting FMLRDL 35840 M4 14 in. 44W White 120V Ceiling Light, 4000K, 4400 Lumens, 220W Equivalent 20-Inch Dimmable Round LED Flush Mount, 4000, 120 Volts, 44 Watts, Damp Listed

• Energy Star Certified to save you hundreds of dollars every year and time since changing light bulbs is a thing of the past.
• Cost Efficient LEDs are designed to last 30,000 hours or over 13 years when on everyday for 6 hours/day – drastically reducing time wasted changing light bulbs.
• Meets Highest Standards so perfect for Multi Family installation – Energy Star certified, cUL certified in the USA and Canada and certified for Damp Locations.
• Very bright LEDs deliver general ambient lighting for surface-mount ceiling application.
• Lithonia Lighting all white fixture works with most standard dimmers from Leviton and Lutron allowing the right level of light output and is easily installed.
• Features a white acrylic diffuser. Hidden cam-latches provide easy diffuser removal for installation and maintenance..
• 20” units produce 4,000 lumens, a 4000K Cool white color temperature at 50,000 hours of service life..
• Fixture operates at 120 volts, 60Hz. Standard input = 44 watts. All mounting hardware included..

Lutron Maestro Dual Digital Dimmer and Switch, Only for Incandescent and Halogen Bulbs, 300-Watt Single Pole | MA-L3S25-WH | White

• Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
• supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
• not compatible with smart lighting fixtures.
• Features an easy-to-use slider for full-range dimming.
• to turn the light OFF, move the slider all the way down until it clicks.
• Side dial allows for user-friendly fine-tuning controls.
• adjust the lowest dimming level to stop light bulbs from flickering.
• Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
• heat & fade resistance to temperatures over 100° to prevent discoloration.
• compatible with dimmable light bulbs only.

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-I, Ivory

• Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
• supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
• not compatible with smart lighting fixtures.
• Features an easy-to-use slider for full-range dimming.
• to turn the light OFF, move the slider all the way down until it clicks.
• Side dial allows for user-friendly fine-tuning controls.
• adjust the lowest dimming level to stop light bulbs from flickering.
• Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
• heat & fade resistance to temperatures over 100° to prevent discoloration.
• compatible with dimmable light bulbs only.

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-GD, Gold

• Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
• supported by major-brand light bulbs from GE, Cree, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
• not compatible with smart lighting fixtures.
• Features an easy-to-use slider for full-range dimming.
• to turn the light OFF, move the slider all the way down until it clicks.
• Side dial allows for user-friendly fine-tuning controls.
• adjust the lowest dimming level to stop light bulbs from flickering.
• Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
• heat & fade resistance to temperatures over 100° to prevent discoloration.
• compatible with dimmable light bulbs only.

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-BK, Black

• Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
• supported by major-brand bulbs from GE, Cree, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
• not compatible with smart lighting fixtures.
• Features an easy-to-use slider for full-range dimming.
• to turn the light OFF, move the slider all the way down until it clicks.
• Side dial allows for user-friendly fine-tuning controls.
• adjust the lowest dimming level to stop light bulbs from flickering.
• Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
• heat & fade resistance to temperatures over 100° to prevent discoloration.
• compatible with dimmable light bulbs only.

Beam Lighting 24” Curved Under Cabinet Light Cover Replacement | White Ribbed Acrylic Diffuser | 23-7/8” Length x 2-3/4” Width x 1-3/8” Height Please Check Size is Correct Before Ordering

• REPLACEMENT LENS FOR 24 INCH UNDER CABINET / UNDER COUNTER FLOURESCENT LIGHT: High quality 24 inch (23-7/8 inch nominal length) white acrylic replacement lens cover diffuser for under cabinet fluorescent fixture. Fits several different Lithonia, GE models, plus many others..
• 100% ACRYLIC NON-YELLOWING FORMULA FOR LONGEVITY: These lenses have ribbing on the outside for maximum light diffusion, and are UV stabilized to prevent yellowing..
• QUALITY AMERICAN MADE PRODUCT: Our lenses are manufactured here in the USA and are made to the same specifications as the covers on the original fixture, and are far superior to cheap imported replacements..
• THIS LENS MEASURES: 23-7/8 inch length x 2-3/4 inch width x 1-3/8 inch height (will fit 24 inch light fixture)..
• NOT SURE ABOUT SIZING?: A Beam Lighting Plastics Expert is just a phone call or email away..

TOPGREENER Kalide Dimmer Light Switch, LED Dimmer Switch, Single Pole, 120VAC, 60Hz, 200W LED/CFL, Neutral Wire Not Required, TGDS1-LA, Light Almond

• Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch.
• supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more.
• not compatible with smart lighting fixtures.
• Features an easy-to-use slider for full-range dimming.
• to turn the light OFF, move the slider all the way down until it clicks.
• Side dial allows for user-friendly fine-tuning controls.
• adjust the lowest dimming level to stop light bulbs from flickering.
• Made of Polycarbonate Thermoplastic material to provide the durability and resilience needed to withstand hard impacts and heavy force.
• heat & fade resistance to temperatures over 100° to prevent discoloration.
• compatible with dimmable light bulbs only.

Clear Strip Light Mounting Clips Self-Adhesive Strip Light Brackets Hooks,Fixing Clamps LED Strip Light 8mm,10mm,12mm.100 Pack Strip Light Brackets Holder,USB Cable Wires Organizer.

• REPLACEMENT LENS FOR 12 INCH UNDER CABINET / UNDER COUNTER FLOURESCENT LIGHT: High quality 12 inch (11-7/8 inch nominal length) white acrylic replacement lens cover diffuser for under cabinet fluorescent fixture. Fits several different Lithonia fixtures plus many others..
• 100% ACRYLIC NON-YELLOWING FORMULA FOR LONGEVITY: These lenses have ribbing on the outside for maximum light diffusion, and are UV stabilized to prevent yellowing..
• QUALITY AMERICAN MADE PRODUCT: Our lenses are manufactured here in the USA and are made to the same specifications as the covers on the original fixture, and are far superior to cheap imported replacements..
• THIS LENS MEASURES: 11-7/8 inch length x 2-7/8 inch width x 1 inch height (will fit 12 inch light fixture)..
• NOT SURE ABOUT SIZING? : A Beam Lighting Plastics Expert is just a phone call or email away..