Categories

Best Live Center Tool Holder

Shop Fox D4088 Lathe Attachment for Drill Press

  • Includes a base plate with live center, 12-Inch tool rest, mounting bolts, mini screw center and spur center.
  • Fits all drill presses with a through hole in the table.
Check Stock

Mini-Lathe for Home Machinists (Fox Chapel Publishing) An In-Depth Look at the Different Components of Your Small Metal Lathe, Set Up, Tuning, How to Use the Accessories, & Hundreds of Illustrations

  • Attack workpieces up to 18 inches long and 12 inches wide.
  • Switch between five different speeds: 520, 900, 1400, 2150, or 3400 RPM.
  • Includes 3-1/8 inch faceplate for turning bowls, cups and other non-spindle workpieces.
  • MT2 tailstock and headstock tapers allow for compatibility with a wide variety of lathe accessories.
  • Features a 4.5A motor, an MT2 headstock spur center, an MT2 tailstock live center, an 8-inch tool rest, and an onboard accessory holder.
Check Stock

Toolly 0XA Wedge Type Quick Change Tool Post Set For Mini Lathe up to 6-9 Inch Swing OXA TOOL POST

  • Quickly and easily install on an engine, bench, or turret lathe for a wide range of operations. Fully interchangeable with Aloris, Dorian, Phase II,....
  • This set includes: No. 0 Wedge Type Tool Post(1.75" L x 1.75" W x 2.5" H), No. 1 Turning & Facing Holder(up to 1/2" tool capacity),.
  • No. 2 Boring Turning & Facing Holder (up to 1/2" tool capacity), No. 4 Heavy Duty Boring Holder (3/8" & 1/2" tool capacity),.
  • No. 7 Universal Parting Blade Holder (1/2" tool capacity), No. 10 Knurling, Turning & Facing Holder (up to 1/2" tool capacity)..
  • Stud size is M10 and is perfect for most mini lathes, although modification may be needed for some machines (a bushing or new center stud for a....
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

ABN Flexible Tool Tray - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 10in x 9in

  • [Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray to hold parts and tools for you.
  • Use this silicone tool tray for your workshop and garage.
  • [No More Slippage]: Save time and energy using this parts tray to prevent the dropping of your parts and tools.
  • Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
  • Ridges in center compartment keep tools in place.
  • [Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
  • Flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included 4 notches, 2 large pockets, 3 small pockets, 5 socket holes.
  • [Flexible Silicone Rubber]: No need to worry about this non slip flexible tool organizer falling apart after extended, repeated use.
  • Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
  • [Perfect Size]: Silicone tool tray measures 10 x 9 x 1 inches (26 x 22 x 2cm).
  • Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
  • Package includes 1 flexible non slip tool holder for your workshop.
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • ...ool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.
Check Stock

MT2 Live Center, 0.0002' High Accuracy 60 Degree Lathe Center with 18mm Shank Diameter for Lathe Wood Metal Turning Tool

  • [Specifications] This MT2 60 degree live center, its runout is 0.0002", the cone shank is 18mm, its hardness is 55-60 hrc.
  • Long-Term Practical: Features excellent dustproof and liquid proof seal while the rolling live center has long service life..
  • Making Material: The rolling lathe live center is made of high quality metal, this rolling lathe live center has high hardness and is durable in use..
  • Working Performance: The rolling lathe live center is professional manufacturing for good working performance..
  • Scope of Application: The rolling lathe live center is suitable for high speed lathe, CNC lathe, and general manual lathe..
Check Stock

Selfie Ring Light with Cell Phone Holder Stand for Live Stream/Makeup, UBeesize Mini LED Camera Lighting with Flexible Arms Compatible with iPhone/Android

  • ...e-up, lay flat, selfie photos, dark scenery vlogging etc. No more searching for the perfect light to take a photo..
  • EASY TO USE: Easy control on cord to power on/off or switch to the lighting mode you prefer. USB Powered, no battery needed, works well with multiple devices – PC, Battery Bank..
  • UNIVERSAL PHONE HOLDER: With an extra width that ranges up to 3.6 inch, our phone mount holder is compatible with almost ALL smartphones with or without a case, suitable for iPhone 7 plus, 7, 8, 8 plus, X, 6, 6s, 5, 5s, 4, 4s/Samsung Note 8, S8/LG/HTC..
Check Stock

Stud Finder Wall Scanner Detector - Upgrade 5 in 1 Electronic Stud Sensor Wall Wood Metal Stud Sensor Pipe Joist Beam Finders Accurate Edge Center Finder for Wood Beams AC Wires Metal Detection

  • ACCURATE: Upgraded 2022 Intelligent Microprocessor Chips = More accuracy- Freetim stud finders adopts the Advanced Intelligent Microprocessor chip which can accurately and quickly find edges and center of metal, studs, joists, pipes, and live AC wire behind walls, floors, and ceilings. The Fast detection of this wall scanner saves users time and effort, making task completion easier.Whether you are a professional, homeowner or a DIY enthusiast, you would find great use with it..
  • EASY: DIGITAL LCD DISPLAY & CLEAR SOUND WARNING Helps you Find the Exact Stud Center and Edges Easily Quickly - This wall stud finders features large LCD display together with clear sound warning,and could help you find the exact stud center and edges Easily,Quickly and Accurately, saving you more time and effort!.
  • UPGRADE: The upgraded 5-in-1 mode provides users with more detection needs. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep.
  • medium scan locates the center and edges of wood and metal studs up to 1 inch deep.
  • Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep.
  • Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep.
  • AC scan detects live unshielded AC wires up to 2 inches ....
Check Stock

Stud Finder Wall Scanner - Upgrade 5 in 1 Electronic Stud Sensor Wall Detector Wood Metal Stud Sensor Pipe Joist Beam Finders Accurate Edge Center Finder for Wood Beams AC Wires Metal Detection

  • ACCURATE: Upgraded 2022 Intelligent Microprocessor Chips = More accuracy- Freetim stud finders adopts the Advanced Intelligent Microprocessor chip which can accurately and quickly find edges and center of metal, studs, joists, pipes, and live AC wire behind walls, floors, and ceilings. The Fast detection of this wall scanner saves users time and effort, making task completion easier.Whether you are a professional, homeowner or a DIY enthusiast, you would find great use with it..
  • EASY: DIGITAL LCD DISPLAY & CLEAR SOUND WARNING Helps you Find the Exact Stud Center and Edges Easily Quickly - This wall stud finders features large LCD display together with clear sound warning,and could help you find the exact stud center and edges Easily,Quickly and Accurately, saving you more time and effort!.
  • UPGRADE: The upgraded 5-in-1 mode provides users with more detection needs. 1/2 inch scan mode locates the center and edges of wood and metal studs up to 1/2 inch deep.
  • medium scan locates the center and edges of wood and metal studs up to 1 inch deep.
  • Deep scan locates the center and edges of wood and metal studs up to 1.5inch deep.
  • Metal scan detects metal (Ferrous and Non-Ferrous Metal) up to 2.36 inch deep.
  • AC scan detects live unshielded AC wires up to 2 inches ....
Check Stock

Shop Fox W1758 Wood Lathe With Cast Iron Legs And Digital Readout 43 Inch

  • Heavy-duty, precision ground cast iron bed and cast iron legs ensure stability and minimal vibration.
  • Lever speed adjustment, 10 speeds: 600 - 2400 RPM.
  • Quick lock/release levers for tailstock and headstock.
  • 0 Degree, 60 Degree, 90 Degree, 120 Degree and 180 Degree headstock rotation.
  • Includes: 6-Inch faceplate, MT#2 spur center, MT#2 live center and tool rest w/ swivel arm base.
Check Stock

Titan Category 1 Ballast Box 3 Point Cat 1 Fits John Deere Tractors

  • ... DIMENSIONS: This ballast box measures at 25 1/2" x 24 1/4" x 15 3/4" and weighs 132 lbs. It has a vertical pin spread of 24.5” and a horizontal pin spread of 15”. The box has a volume of 5.3 cu. ft, the tool holder pocket has a diameter of 2 5/8", and from center fork pocket to center fork pocket, it measures 10 1/2" in length. From the bottom to the center of the lower lift pin, it is 9”..
Check Stock