1 Roll 100% Total Transfer Tamper Evident Security Packing Tape (2 Inches x 55 Yards x 2 Mil, Do Not Break “Caution”, Ultra-Thick “Void” Film, Red – TamperSeals Group)
- ...rity tapes usually needed at least a few minutes to reveal "void"..
- ✅【COMPATIBLE WITH MOST SURFACES】– Besides high energy surface, also including LOW energy surface such as pressed or uncoated paper board, light texture polypropylene, deep texture polypropylene, heat shrink film (PE.
- PVC), Stretch Wrap Film (LLDPE), Tyvek, Smooth finish Styrofoam, rough bare wood etc..
- ✅【UNIQUE PLASTIC CORE & PROTECTIVE FLIM LAMINATED ON EACH TAPE】- Unlike others’ tape with a paper core, we use a 3” plastic core and laminate film on each security tape for you to get a clean and beautiful appearance..
Check Stock2 Rolls 100% Total Transfer Tamper Proof Security Seal Tapes (1 Inch x 55 Yards x 2 Mil, Do Not Break “Caution”, Ultra-Thick “Void” Film, Red – TamperSeals Group)
- ...curity tapes usually needed at least a few minutes to reveal "void"..
- ✅ [COMPATIBLE WITH MOST SURFACES] – Besides high energy surface, also including LOW energy surface such as pressed or uncoated paper board, light texture polypropylene, deep texture polypropylene, heat shrink film (PE.
- PVC), Stretch Wrap Film (LLDPE), Tyvek, Smooth finish Styrofoam, rough bare wood etc..
- ✅ [UNIQUE HIGH-GRADE PACKAGING WITH PLASTIC CORE & PROTECTIVE FLIM LAMINATED ON EACH TAPE] - Unlike others’ tape with a paper core, we use a 3” plastic core and laminate film on each security tape for you to get a clean and beautiful appearance..
Check StockBonison 18\ x 2000' x 80 Gauge Stretch Film Pallet Wrap, 20 Microns Thick Industrial Strength Shrink Wrap. Clear Plastic Machine Grade Stretch Film for Move, Pack, Store.
- Made with high quality linear low-density polyethylene (LLDPE), 80 gauge thickness, ideal for loads up to approx. 2200-2400 lbs. 80 gauge is the most common stretch film thickness and ideal for a variety of applications..
- Advance craftsmanship, single sided cling to reduce pallet to pallet stick..
- Stats: Width: 18 inches. Length: ~2000 feet. Thickness: 80 gauge (20 microns). Inner diameter: 3.34". outer diameter: 6.0". Weigh: 10 lbs..
- Excellent scanning clarity and high puncture and tear resistance..
- Suitable for all stretch film machine with wide application such as wrapping firewood, pallet, boxes, furniture, tools and many more..
Check Stock
AquaPod Kit 2.0 - (Box) BPA free and Made in USA! Emergency Water Storage Container, Hurricane Survival (65 gallons of water – some larger or garden tubs can hold up to 100 gallons of water)
- ★ TRUST YOUR WATER! MADE IN USA with BPA-FREE, USFDA APPROVED MATERIALS ★ AquaPodKit liners are constructed of food grade (lldpe) plastic. This material follows and stays within USFDA guidelines and BPA free. AquaPod kit manufactures their liners here in the USA! trust your water!.
- ★ liners are constructed of food grade (LLDPE) plastic. This material follows and stays within USFDA guidelines and BPA Free.
- ★ PREPARE FOR EMERGENCIES ★ Never be without water in an emergency. During a hurricane or tropical storm, water main breaks and storm surges can interrupt or even contaminate your water supply..
- ★ KEEPS WATER CLEAN ★ Water stored in an open bathtub with dirt, soap film, and exposure to debris will spoil and become useless. Aquapod kit will keep water fresh for up to 8 weeks, depending on humidity and temperature conditions..
- ★ 100% RECYCLABLE ★ NO need to cut any parts off water storage bag - used reservoirs may be recycled into many types of new products. Aqua pod kit is disposable and recyclable - Aqua Pod Kit is the only American Bath Tub Bladder to offers replacement liners. Our reservoirs have a positive impact on the environment. The flexible reservoir requires less space for shipping and smaller shipments require less fuel..
Check StockCreality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer
- COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
- UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
- WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
- EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
- OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock
Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)
- 【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
- 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
- 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
- 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
- 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....
Check Stock
Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer
- Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
- Upgraded High performance extruder for 3D Printer.
- Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
- 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
- ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check StockOfficial 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series
- ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
- ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
- ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
- ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
- ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand
- Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
- Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
- Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
- Features: The mould steel spring is very rigid, strong in pressure and very durable..
- Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check StockRedrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]
- 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
- 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
- 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
- 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock
Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer
- WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
- ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
- EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
- STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
- CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check StockBowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer
- Latest Dual Drive Extruder for Most 3D printers..
- Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
- Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
- Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
- Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock
YZprism Pond Liners LLDPE 25 x 20 FT 20 Mils Softer More Flexible Waterfall Pond Fish Ponds Black Pond Liner Duck Large Water Garden Pond Tarp Liner Fabric Liner for Pond Features Fountain Seals
- Our pond pad is made of LLDPE material, plants, fish and other aquatic organisms do not have any hazards, is very friendly for the environment.
- [Excellent Quality] This waterfall liner for pond thickness is 20 mils, which provides excellent durability and waterproof, in addition, unique exquisite production process makes this pond pad simultaneously with a high degree of stretching Ability and high tear properties, prevent the penetration or damage of plant roots.
- [Highly Flexibility and DIY Operation] - LLDPE is more flexibility than HDPE material to adapt to various irregular surfaces, which can be easily bent and folded according to your pool and waterfall, and can also be based on the length, width of the pond. And depth, cropping or cutting the required size pond pad. Our pond liner has a soft inclined side and a smooth contour, easy to install, effectively saving labor and installation time.
- [Exquisite Composite Process] This permanent permanent fish pond liner with a variety of weather and water conditions can be exposed to sunlight or rock, which has excellent resistance to ultraviolet, high temperature, frost, ozone and oxidation. Effective protective plant....
Check Stock
